Jeffrey sent you a PM!
will catch it later, as now i take a pill and go nighty night as one pill is needed my baack is killign me from the accident!
-G .
Just my thoughts, ideas, opinions and experiences. Others may vary.
HO and N Scale.
After long and careful thought, they have convinced me. I have come to the conclusion that they are right. The aliens did it.
jeffrey-wimberly Not feeling good today so I probably won't be on much. Looks like I won't be able to get the van running right or get a large van or full size pickup to replace it so that has me depressed too.
Not feeling good today so I probably won't be on much. Looks like I won't be able to get the van running right or get a large van or full size pickup to replace it so that has me depressed too.
Good morning. It's 75 with 91% humidity. The high will be 95°. Cloudy with a fair chance of rain. with Not feeling good today so I probably won't be on much. Looks like I won't be able to get the van running right or get a large van or full size pickup to replace it so that has me depressed too. I've already had to postpone, reschedule or cancel a number of important appointments because I had no way to get there and back. An appointment that was cancelled was to get my prosthesis refitted so it's more comfortable and won't try to eat my knee for it's lunch. I ended up having to make a number of small modifications myself. It's better but I still get friction burns. I can't even go grocery shopping when I want to. I have to wait until someone else is going. Well, enough of that.Looks like today will be committed to rest. I have no plans to do anything and I mean nothing.
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
PackerJeff, Would a larger SUV be out of the question?
Gentlemen: Looks like I got Tippy TOp, for my Top O' The Morning Greeting to ye!
Daisy! OH, Daisy! set the men up with breaking fast and don't forget a nice tip for yourself:
So: the cost of your Belgian Waffle with butter and syrple, Scrambled eggs and sausages, mini muffin, Coffee and Juice are on me!
{that was the "continental breakfast" at the hotel in Lancaster! Delicious}
ANd once again, Make today a great day!
morning coffee?
Positive thinking will let you do everything better than negative thinking will.
Few things in the world are more powerful than a positive push. A smile. A world of optimism and hope. A 'you can do it' when things are tough.
I believe in Karma. If the good is sown, the good is collected. When positive things are made, that returns well.
Alright, 1 post before I go to bed...
Frank, though they are kinda rare, there are 302 with 4-bolt mains. Only the Boss 302 blocks and some aftermarket blocks have them. I've seen one for sale, even bored to the right size to use my 331 stuff but the guy wants $1,300 for it. I have less than $650 into my whole motor build so far. That includes AFR heads, a custom (Ed Curtis) cam, Scat crank and rods, King bearings, SRP pistons, and Scorpion rockers. I haven't gotten to the point where I'll order springs or pushrods yet.
Jeff, Would a larger SUV be out of the question?
Ken, I guess that's why I rarely see built up Mopars. They must be expensive as all get out.
Vincent
Wants: 1. high-quality, sound equipped, SD40-2s, C636s, C30-7s, and F-units in BN. As for ones that don't cost an arm and a leg, that's out of the question....
2. An end to the limited-production and other crap that makes models harder to get and more expensive.
Good evening. It's a nice night out. Temp is 78 with 85% humidity with a 5mph southeast wind. There's only a 20% chance of rain.Not much happened here today. I worked on the IIc this morning. Got the 'L' key working properly. The little Apple now works perfectly and thanks to a soak in a 6% hydrogen peroxide solution the case is a nice buff white. The 'old age' yellow went bye-bye! The hydrogen peroxide burn on my right hand is almost completely gone. I spent much of the day watching movies and surfing the net. Didn't play any games.Time for me to call it a night. See y'all tomorrow.
Somethings, for all the gear heads in the group to watch. Check out #11 Hot Wheels Tug of War.
http://www.mashpedia.com/Dodge_Ram
The Ram was cheatin'.
Take Care!
Frank
PackerJeff, if you could find a replacement vehicles, what would the requirements on it be? I remember you saying a truck or a van with an automatic. But I forgot makers, years, etc.
cudaken Jeffery Did you know because of the EPA (I hate them most of the time) oil manafactors had to remove ZZPD from oil? With todays roller cams there is no need of it. But with older Cars and Vans with flat tappet cams it can way waste to the valve train. Here is a link for you.
Evening all, how are yinz?
Well today had me getting a haircut, and getting some gasoline for the car. It also had other events in store, including some railfanning before work. I caught a Wheeling and Lake Erie 611 train heading west from Belle Vernon to Rook PA, in a little hamlet called Baidland outside of Monongahela PA, crossing an old P&WV bridge by Ringgold High school (for anyone who knows the area). It was also neat to see the PROTOTYPE of a model you own on that same train. I didn't pull off to the side of the road in time to snap a photo, but still seeing it counts for something right?
On a less than happy note- I had a drawer that was short 5 dollars at work and had to pay the difference, oh well at least it was only 5 dollars. I've got another long week, but at least I get to see a concert this week (Joe Grushecky and the Houserockers), and possibly some railfanning.
(My Model Railroad, My Rules)
These are the opinions of an under 35 , from the east end of, and modeling, the same section of the Wheeling and Lake Erie railway. As well as a freelanced road (Austinville and Dynamite City railroad).
Vincent,
Don't quote me on this...but I don't believe there were 302's with four bolt mains. Just beafier Machined mains with the 8grade hex head main bolts. My 64 427 Thunderbolt Fairlane had four bolt cross mains, but it had 600+ horse.
If you are talking about the Jasper motors, they do make great motors, never had a problem with any long block I got from them.
Evening Dinners
Flo, and a 440 Buger and Bow Tie Fries
Work Front I had a fair day and Dave sucked Caboose. Made a extra $75.00 so that is better than a stick in your eye!
Work Out Front Day 14 and I have incresed reps by a few in the Military Press and Up Right Rows. Just hope my neck does not hurt Sunday.
Vicent I hate to say it but Mopar cost that much to build! My last 440 long block (Not Counting the Blower) cost $6,000.00 10 years ago and I got off cheap with what I had done with it.
Jeffery Did you know because of the EPA (I hate them most of the time) oil manafactors had to remove ZZPD from oil? With todays roller cams there is no need of it. But with older Cars and Vans with flat tappet cams it can way waste to the valve train. Here is a link for you.
http://www.dodgecharger.com/forum/index.php?topic=46015.0
Luckly I found this posting before I fired up the Road Runner. I bought some STP addative, it cost around $7.00 or so. I may have posted this here, but I had not wrenched for 8 years. While I was undoing the drain plug I got confussed and stripped the oil pan plug. Road Runner will drip oil a little while sitting so I would top off when I played with her.
One day I started hearing Valve Train Noise and I was afraid I had hurt the cam! Bought some more STP addative and ticking was gone!
Ping You need to retard the timing! That is more than likely why it sounds like a diesel. I would retard it 2 degrees and give it a drive. Outer balacer ring will slip and give you a fales timing reading.
See you all later, Ken
I hate Rust
jeffrey-wimberly zstripe A flathead must have the heads removed to get at lifters. I can understand that. All the push rods and valves were in the block. The only moving part in the head in the head was the thermostat. I don't believe I've ever seen a flathead 318. Was one ever made? As I remember Dodge/Chrysler used mostly straight sixes in their cars and trucks for a long time and the start of cars available with eight cylinder engines had straight eights. The 318 we're used to seeing today is the LA version introduced in 1967.
zstripe A flathead must have the heads removed to get at lifters.
I can understand that. All the push rods and valves were in the block. The only moving part in the head in the head was the thermostat. I don't believe I've ever seen a flathead 318. Was one ever made? As I remember Dodge/Chrysler used mostly straight sixes in their cars and trucks for a long time and the start of cars available with eight cylinder engines had straight eights. The 318 we're used to seeing today is the LA version introduced in 1967.
Yeah the straight 6's Dodge/Chrysler were flat heads and many others. The truck you may have driven around in the Army 3/4 Dodge had a very dependable flat head six in it, Dodge power wagon's had flat head six's. No 318 flat heads, but Buick OHV straight eights were over 318 cu.in. and also don't forget Hudson Hornet's flat head in line 8's, also Packard. If you do decide to do what I suggested to your motor let me know and I will find the intake and exhaust clearance that you need to follow when installing the rocker arms back on, pretty straight forward, but you need a thickness gauge, not expensive to do it. The gauge goes between the rocker arm and the top of the valve where the springs are, usually 18 thousands to 25 thousands, I would have to look it up.
That pic. is a Chrysler 318, 69/88, you can see the lifters in the valley with the push rods sitting on top, they slide right out the top, after removing the push rod.
Evening guys
Haven't popped in here lately. Been busy with the new (hopefully non-temporary) job. A lot of the people there say after 2 weeks I'm doing as good or better than some of the people that have been there for years. Hopefully they keep me.
Trainwise I've been working on a few more kits.
Lately I've been reminising about my mother's previous ride. What brought it up was a guy from my MRR club was complaining his 2010 Chevy Silverado (or whatever the truck is called) struggled with the club's trailer (which is estimated to be 4200 lbs). It was an '03 Ford Expidtion Eddie Bauer. With the 5.4 triton engine and the 3.73 gears in the rear end, that thing could move pretty good. It was also a good puller, It took a Uhual flatbed trailer with an 84 LTD on long-distance drives twice (San Antonio to here, and Miami to here) no problem. Heck, it could hit 85 easily with the trailer and car, and still get 14 mpg (which I think for something that size pulling that much weight is pretty good, it could get up to 17 in the city). Never had an issue with it aside from a clogged filter and muffler (a K&N filter and a quiet flowmaster fixed that). Alas, my mother traded it in around 175k miles on her new Edge and got like 3,200 for it (practially giving it away for what it cost to buy at 25k miles). Part of me wants one cause I used it growing up and learning to drive. They aren't too terribly expensive now, I've seen a few in the low 3,000 range.
Frank, I checked that link to see if I could find a Ford 302 4-bolt main block. I'm kinda wondering if the 302 block I'm using for my 331 stroker build will hold up to the 450 or so horses that a computer program is predicting for it.
Ken, Are those prices correct on the mopar motor rebuilds? My car cost me less than the low end of the spectrum, and I could find a decent truck (see above about the expidition) or van around here for the prices you're predicting; granted a lot of them are probably newer than what Jeff would like.
Jeff, if you could find a replacement vehicles, what would the requirements on it be? I remember you saying a truck or a van with an automatic. But I forgot makers, years, etc.
jeffrey-wimberly Got thunderboomers rolling through east to west. Looked at the radar and they don't look like much. Been watching some old movies today. So far 'Mad Max', 'The Delta Force' and 'Earthquake'.
Got thunderboomers rolling through east to west. Looked at the radar and they don't look like much. Been watching some old movies today. So far 'Mad Max', 'The Delta Force' and 'Earthquake'.
Just got home now, grabbed a burger for dinner. Those are some classic movies Jeff, I loved delta force. If I can remeber, Universal studios had a earthquake ride. That was ten years ago though. I know they had a twister ride around the time of the movie and it was fun.
Im going to be whistling the delta force theme song all night,lol
zstripeA flathead must have the heads removed to get at lifters.
RB,
You do not have to remove the heads on that engine to replace the hydraulic lifters. You have take the carb/intake manifold off remove valley cover and there you will find your lifters. To get them out....you take off your valve covers off the heads and remove the rockers arms and remove the push rods, then remove the lifters, a magnet works great for that. Replace with new lifters, do all, not just two, put you push rods back on after you checked for not being bent or badly worn, put rocker arms back on, valve covers. And now would be the time to rebuild your carb. Kit comes with all necessary parts/gaskets. Get a new valley cover gasket,new intake manifold gaskets and put all back together, fire her up and be ready for a big performance change and starting. It is not really no big deal to do all that, don't even need a torque wrench. Cost for all parts should be around 250.00, labor if you do it free, I said this before, that is a easy engine to work on. Your call.
A flathead must have the heads removed to get at lifters.
I'm not talking out of my hat on this...I have rebuilt many gas engines and some diesel.
I would rather do what I just suggested, than pull the motor in that van.
Heartland Division CB&Q Good morning. Happy anniversary to Mr. and Mrs. Galaxy! Jeff.... I have not followed the van story. Do you know what is the problem? Is it internal engine parts or external carb, fuel lines, etc.?
Good morning.
Happy anniversary to Mr. and Mrs. Galaxy!
Jeff.... I have not followed the van story. Do you know what is the problem? Is it internal engine parts or external carb, fuel lines, etc.?
Aw, Shucks, Thanks, for 14 years total we have put up with each other. The next 14 will remain to tell.....
As far as Jeffrey's situation, he told one side, I'll tell the rest:
AS far as Jeffrey's vehicle problem, I started a "Jeffrey vehicle fund" for either a new engine installed or a whole newer vehicle which ever comes first. We have pledges of $550{+?} so far. That MIGHT get him his new engine, IF one can be found. Installation costs can be minimized if Jeffrey's nephew will do it, but if it's the same nephew who did not cut down the tree that hit Jeffrey's trailer, good luck on that coming out "free". If {Cuda}KEN can find him one close, getting it to Jeffrey is the other matter, but Ken is willign to try to locate one and even chip into the fund-taht is the {+?} is for.
I don't have much to spare in my budget at all what with all the out-of-pocket medical costs incurred to find out about MOH's bone disease, but I have pledged anyway. I believe in giving til it hurts if it helps out a fine fellow like Jeffrey, who isn't a drunk carouser who smokes dope all day and runs with questionable women.
I also belive in paying it forward, and in Karma that comes back around to you for your good deeds.
But that is just me, and my nature. I would even give back to the food pantries once a month, though I might need their services later that month again!
If jeffrey had a good engine that might give him about 100K usage, that could last him awhile!
Later
Hi Guys,
Just wanted to stop in before heading into work. Its the last of the four hour oreintation shifts before moving to a normal 8 hour shift starting Monday. Im only off tomorrow as I am off Friday,Saturday and Sundy of next week as Im going to the IRL race in Toronto. I told them about the race tickets I had before I started and they had no problme with it. They are really nice there.
Havent really felt too good today for some reason so I guess having a four hour shift is okay. I have a list of some model railroad projects Im going to start tonight and work on tomrrow as they are calling for a 90% chance of rain. But if it does stay clear I will be cutting grass here at home and at my mom and dads. Well talk to you fellas sometime after 6:30.
Heartland Division CB&QJeff.... I have not followed the van story. Do you know what is the problem? Is it internal engine parts or external carb, fuel lines, etc.?
............
Everybody: Happy Model Rairlaoding!
GARRY
HEARTLAND DIVISION, CB&Q RR
EVERYWHERE LOST; WE HUSTLE OUR CABOOSE FOR YOU
Good morning. It's 82° with 78% humidity. The high will be 95°, cloudy and a fair chance of rain. with Not much going on here. Worked on the IIc early this morning. Got the 'L' key working properly. It no longer double clutches or sticks. Just needed a little more cleaning and TLC.I relabeled the keys on my PC keyboard. I do that periodically because the original gray on black is hard for me to see. I'm somewhat colorblind and shades of gray don't show up well. I can see light gray and dark gray but many of the variations in between do some weird things like show up as silver, black or a color that isn't even related. I also have problems with some shades of blue. So I put labels on the keys that are bold black on stark white. I can see them easily but they wear out in one to two months and must be replaced. This time around I added a clear film on top of the black/white labels. This should make them last much longer.I have no plans for the rest of the day but I'm pretty sure I'll find something to do.
Todd
Central Illinoyz
In order to keep my position as Master and Supreme Ruler of the House, I don't argue with my wife.
I'm a small town boy. A product of two people from even smaller towns. I don’t talk on topic….. I just talk.
Mornin' everyone!
Zoe, coffee to go please... I'm on my way out the door to my son's house for Granddaughter #1s Birthday party (the family edition). I will leave directly from there to go to the Museum for this evenings Train's at Twilight. This is billed as an old time "Amusement park kind of event, with all kinds of extras, even an antique Calliope that casn be heard over the rolling hills in Henrieta. Ice Cream is available from a local vendor, and both Trollies and trains will be running.
Galaxy, congratulations on 12 years of happyness to both of you!!!
Catch you late this evening, maybe...
73
Ray Seneca Lake, Ontario, and Western R.R. (S.L.O.&W.) in HO
We'll get there sooner or later!
morning...
I have only one share in corporate Earth, and I am nervous about the management. -E.B. White, writer (1899-1985)
Positive anything is better than negative nothing.
Good evening. Didn't do much today. I watched some 'American Ninja Warrior' this morning. The nurse called a little before noon and wanted to meet me at my fathers place at 1:30pm. So I cleaned up then went down there at 1:02 with a couple bags of laundry and got them started. The nurse was late. She showed up at 2:15. She checked me out then changed the wound vac dressing and that was that. I waited there until the clothes were dry and came back home. I then watched a couple of A-Team episodes then went out to make a video of my drive around the loop. Making the video was simple. Uploading it was a bear! My upload speed is only 0.52 mbps. Snails pace by any other name. I tried three times on Photobucket. First time it failed. Second time the power went out right in the middle of the upload. Third time it failed again. The heck with Photobucket. I went to Youtube and uploaded it there. It took an hour to upload a two and a half minute video and I couldn't do anything on the computer for that hour. Google blocked anything else from running. The video finally uploaded and I wasted no time publishing it and posting it on the forums I go to.Time for me to call it a night. See y'all tomorrow.
Good Morning!
I woke up at 3.30am. Those dang birds made such a terrific noise right outside of the bedroom window. Unbelievable, how much "voice" these little creatures have.
Flo, it´s not Sunday yet, but may I have my big weekend breakfast, please. I am hungry this morning.
There is a weekend HD list waiting for me, so there will be little time to w*rk on the wharf buildings. Too early to start now - I´d wake up the neighborhood, if I fire up my table saw - not to forget Petra, who is still slumbering. We will be joining Petra´s aunt at the summer party in the afternoon, so maybe no progress at all today.
Have a rewarding day!
I made another van video. This one a low speed drive around the loop. Remember that this is a GASOLINE engine. Van drive.