Trains.com

Classic Train Questions Part Deux (50 Years or Older)

856758 views
8197 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2006
  • 2,535 posts
Posted by KCSfan on Friday, January 9, 2015 8:03 AM

I can't find this car in any of my OG's and while it seems a bit far fetched I'll throw it out as a guess anyway. N&W Between Roanoke and Kenova and Ohio Valley Electric from Kenova to Huntington. Coach passengers would have to change at Kenova

Mark

  • Member since
    February 2012
  • 487 posts
Posted by rfpjohn on Thursday, January 8, 2015 7:13 PM

One more thing, on the subject of the WB&A/CT trackage in the Bennings/ Seat Pleasant area. East Washington's power was used to transfer coal form the B&O at Chesapeake Jct. to the Capital Transit's Deane Ave. line, where it was hauled to the power plant by CT steeplecabs. One of the steeplecabs was a 45 ton Baldwin unit with a one piece cast frame, built in 1906 for the Hoboken Shore RR. It came to DC via Iowa! The East Washington had a brand new GE 45 ton side rod unit to replace steam, supplimented by a Whitcomb center cab job they got from the Army and later on, an RS-1 from Washington Terminal. Capital Transit became interested in getting rid of the freight operation during the early 50's and ended up selling the now isolated section of freight trackage to the East Washington in 1954. Later pictures of the power plant show in plant shifting done by a fireless cooker.

  • Member since
    August 2005
  • From: At the Crossroads of the West
  • 11,013 posts
Posted by Deggesty on Thursday, January 8, 2015 3:37 PM

The train, parlor car and coaches, did not approach the C&O's James River Line, nor did it go west of Huntington. It was a Roanoke-Huntington train, though coach passengers may have had to change at one point.

Johnny

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Thursday, January 8, 2015 12:49 PM

I recall that the three through trains the C&O operated via Charlottesville, plus a local at the time, they also did have one Richmond or Newport News - Cincinnati train via the James River line.  It was a local, but it may have had a parlor car.  It may have been combined with one of the "passenger line" trains west of Huntington.

I suspect it was a parlor-buffet-diner.

  • Member since
    August 2005
  • From: At the Crossroads of the West
  • 11,013 posts
Posted by Deggesty on Thursday, January 8, 2015 11:59 AM

This was a through train

Johnny

  • Member since
    May 2012
  • 5,017 posts
Posted by rcdrye on Thursday, January 8, 2015 11:40 AM

Even though Huntington is only a short ride from Ashland, where the ex-N&W line from Roanoke crsses the ex-C&O, I would guess that the best route would be via the C&O's James River line and Lynchburg VA.  The most direct option would have been via Charleston W. Va and a connection to the NYC/Virginian train to Roanoke, but I don't recall the Virginian offering Parlor cars...  If they had them they were retired during the 1930s.

  • Member since
    August 2005
  • From: At the Crossroads of the West
  • 11,013 posts
Posted by Deggesty on Thursday, January 8, 2015 11:18 AM

Well, I erred in picking that 1958 TT up out of my collection. I first found a 1958 Guide (I have none from 1957) from the top of a box, and then dug into my collection of passenger TT's--and skipped the one from 1957 that I have.

This morning, I went back to the NYC TT's, and found that you ae looking at one between the  4/15/56 and the 10/27/57 issues that I do have; both of which have the New York Special in them--and there is a difference in the consist of the train between the two; the earlier one does have eleven city pairs (including a Detroit-Hoboken car), and the later one has only ten (no interchange with the Lackawanna--and there are many other changes).

Back years ago, how would you travel in a through parlor car between Roanoke, Virginia, and Huntington, West Virginia?

Johnny

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Thursday, January 8, 2015 10:08 AM

I remember seeing a Capitol Transit black steeplecab with white lettering.  I assume then, that CT felt the WB&A box-cabs were too old and decrepit to be used and bought a steeple-cab or several from some other interurban, or possibly from the New Haven, who had quite a fleet of dc trolley-pole steeplecabs for the Manufacturer's Railroad in New Haven, and other freight servicde on local streetcar tracks in cities and towns served by the Connecticut Compnay. Or my memory may be wrong and it was a box-cab.

 

  • Member since
    May 2012
  • 5,017 posts
Posted by rcdrye on Thursday, January 8, 2015 6:22 AM

WB&A used box motors for all freight work.  East Washington did have a GE 44-tonner in later years before acquiring a 70 tonner from somewhere.

  • Member since
    May 2012
  • 5,017 posts
Posted by rcdrye on Thursday, January 8, 2015 6:15 AM

I was looking for 1957's "New York Special", which was obviously combined with the "Fifth Avenue Special" in 1958 with the big NYC exodus from Pullman.  The only one in the New York Special that was gone in Johnny's answer was a Plattsburgh NY - GCT car off D&H #8, which was also discontinued in 1958.

Well done, Johnny!  The reverse train (in 1957) was the Iroquois #35, which carried GCT-Rochester, GCT-Ogdensburgh, Boston-Chicago, Boston-Buffalo and Lake Placid-Chicago (WedSat). Iroquois #36 was coach-only Buffalo-GCT.

 

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Thursday, January 8, 2015 1:51 AM

yes,rc. I understand that, but the plant tracks were switched first by the WB&A and then by CT, with at least one electric steeplecab retained by CT after the WB&A shrunk to the B&A. Never did ride the WB&A, although did visit Washington as a small child when it ran, but did ride the Baltimore and Annapolis after WWII.

You asked a great question.  I look forward to Deg's.

  • Member since
    August 2005
  • From: At the Crossroads of the West
  • 11,013 posts
Posted by Deggesty on Wednesday, January 7, 2015 8:58 PM

You are interested in #6, the Fifth Avenue Special.

According to the 7/1/58 public timetable, there were 12 city pairs: Chicago-New York, Chicago-Lake Placid (Fri only), Toledo-New York (x Sat), Cleveland-New York (Sat only), Cleveland-Boston (2), Rochester-New York (2), Ogdensburg-New York, Niagara Falls-NY (Sat only), Buffalo-NewYork (Sat only), Syracuse-New York (Sat only), Massena-New York (Sat only), and Lake Placid-New York (4 cars; one daily, one ex Sat, and 2 Sun only).

Eight pairs Mon-Thur; nine Friday, nine Saturday, and six Sunday.

Lv Chicago 11:10 in the morning, and arrive in New York City at 7:30 the next morning.

Johnny

  • Member since
    May 2012
  • 5,017 posts
Posted by rcdrye on Wednesday, January 7, 2015 4:57 PM

John Merriken's "Every Hour on the Hour (CERA B-130) explains the rather complex relationship between the Laurel interurban and the WB&A.  The East Washington was part of the former Chesapeake Beach Ry. which met Capitol Transit at the sme location the WB&A did, but wasn't the WB&A.

 

A late morning NewYork Central train departed Chicago for New York on a 20 hour schedule in 1957, carrying sleeping cars between no less than 9 city pairs (not all at the same time).  There was no westbound counterpart with the same name, the unmatched westbound train only carrying sleepers between 6 city pairs.

Name the eastbound train and at least 7 of the city pairs.

  • Member since
    February 2012
  • 487 posts
Posted by rfpjohn on Wednesday, January 7, 2015 3:47 AM

Yes, Dave. The power plant still exists. It converted to natural gas(?) during the early 70s, which led to the demise of the East Washington Railway. Coal traffic from the B&O interchange to the power plant was 90% of their traffic. The former PRR also served the same plant and the track is still there, crossing I295 on an overpass. You are correct in stating that the trackage in question had been part of the WB&A.

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Tuesday, January 6, 2015 8:33 PM

but it had been WB&A, not CT, earlier.   Does this power plant still exist?  What fuel doesit use today, and how is it delivered?

 

Meanwhile, we await rc's question.

  • Member since
    February 2012
  • 487 posts
Posted by rfpjohn on Tuesday, January 6, 2015 8:04 PM

I believe the power plant coal delivery was handled by the Chesapeake Beach Railway, later the East Washington Railway, using Capital Transit trackage. The East Washington employed a pair of ex ACL 4-4-0s until 1946, when they dieselized with a GE 45 ton unit and a second hand Witcomb. Capital Transit used their steeplecabs to switch the Bennings plant.

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Tuesday, January 6, 2015 4:02 PM

You are write about Mt. Eliot, although I was referring to the extension of the Michigan Avenue lines (PCC's ran through s Gratiot-Michigan, but the WWII extension was gone at that time)over what had been Easterb Michigan's interurban just as far as the Ford River Rouge Plant in Dearborn.  Detroit Dept. of Street Railways already one line to the plant, the Baker line, but it was not sufficient for WWII worker traffic.  I not sure if the was a gap in service between the end of Eastern Michigan service and the start of Michigan Avenue DSR service.  In addition these tracks during WWII saw shift-change service on one other E-W line (Kerchiavalle(Sp?)).  Eastern Michigan had provided short-turn service to the plant by reversing with a simple crossover and one siding, but DSR had a series of loops to handle all service with their typical large Peter-Witt single-end cars.

The wyes you mentioned in Washington were with counduit and unrelated to WB&A.  The Roslyn - Benning line ran only to Benning.  Service to Seat Pleasant and the single-track branch with a wye (Kenilworth) was by WB&A until they stopped operation, and the wye was installed by Capitol Transit (not right away, double-end cars were run for a while), and ditto the loops at Seat Pleasant, and I believe the branch was doubled, but my memor is not clear, even though I rode it several times.  The power plant electric frieght (coal) business of Capitol Transit was inhereted from WB&A.  I suppose the tracck from the interchange then was taken over by the PRR after CT left, but for a while it was operated as an isolated short rail line with their steeple-cap still in use.  Possibly owned by the power company at the time.

The Branchville line and the Branchville-Beltsvillel shuttle were not related to the WB&A but a different interurban, and that service stated much earlier.  I believe the lines used by CT were always with one or the other of the former street railways, and the interurban to Laural used the tracks, not the other way around.

Still, I look forward to your next questionl.

 

 

 

 

  • Member since
    May 2012
  • 5,017 posts
Posted by rcdrye on Monday, January 5, 2015 11:31 AM

Detroit's Mt. Elliot line was weekdays only and replicated part of a route known as the "Rapid".

DC Transit's private ROW operation to Laurel, later cut back to Branchville (82) was built for interurban purposes by a line affiliated with the WB&A, and operated part way on the New York Avenue route used by WB&A. The postwar DC transit operations with wyes were the Soldiers' Home (74) and Takoma (72).

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Saturday, January 3, 2015 11:42 AM

hint:   in the Detroit case, transit service was not full time, but there were periods when it saw the heaviest patronage on the system.

hint:   in the Washington case, a wye was involved.

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Friday, January 2, 2015 6:53 AM

Opposite from the situation of the CA&E and the CTA post WWII, in Detroit and in Washington, DC, an interurban abandonment before WWII saw the local transit system taking over a portion of the interurban line and providing service until well after WWII.  Both involved a limited amount of new track and the new track was required for the same reason in both cases.  Why?   Describe both situations in as much detail as you can.
  • Member since
    May 2012
  • 5,017 posts
Posted by rcdrye on Friday, January 2, 2015 6:34 AM

I checked around to see what was available about this before accepting your answer.  You do have the right show.  Buffalo Bill's Wild West Show was virtually destroyed in the North Carolina wreck, but he managed to rebuild it enough so that it ran until going bankrupt in 1913.  After the bankruptcy he cobbled together one last version of the show. 

The show was sheduled to go from Roanoake VA to Norfolk VA over the N&W.  N&W rejected the equipment.  Virginian agreed to move Cody's show, but during the move an end sill pulled out of one of the cars, derailing several others and killing some performers and animals.  Cody never did another show, and died in Denver the following spring.

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Thursday, January 1, 2015 10:22 PM

so---- do I have the right show?    Just check further on the additional history?

  • Member since
    May 2012
  • 5,017 posts
Posted by rcdrye on Thursday, January 1, 2015 2:19 PM

Close.  The show went back into business some time after the North Carolina wreck as a series of "farewell tours".

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Thursday, January 1, 2015 12:26 PM

Probablly not what you want, but Buffalo Bill's Wild West Show was put out of business near Lexington, North Carolina by one of its three trains being run into by a freight, destroying over 100 horses and injuring Anne Oakley, but this was in 1901.  And William (Bill) Frederick Cody lived to 1917.

  • Member since
    May 2012
  • 5,017 posts
Posted by rcdrye on Thursday, January 1, 2015 9:33 AM

This famous showman's show ended its run in 1916 far from the region it was named for, in a wreck on a carrier known for one commodity.  Name the showman, the show and the railroad.

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Thursday, January 1, 2015 5:11 AM

You are the winner, but there are corrections to be made:
 
  1. The station was the Harlem River terminal of the New York Westchester and Boston, and it ran steel vestibuled center-door mu equipment to Portchester, later only to New Rochelle, and to White Plains.  It was owned by the New Haven and was the last operation to use the station, using it to abandonment in the middle-late 1930’s.  It used the north catenary-equipped track at the station, also used until about 1931 or 1933 by the New haven’s Harlem River shuttle, which served Hunts Point Avenue. Pelham Park, and Pelham Manor (where later a great model railroad existed until the station was in the path of Westchester’s New England Thruway), and terminated on track 5 at New Rochelle, using mostly the original steel open-platform mu cars, as well as two vestibuled standad steel mu’s without dc and third-rail capability.  The south track, third rail equipped, saw a three-car open-platform gate-car shuttle runnting to 129th 2nd and 3rd Avenue elevated station.   The New Haven’s shuttle to New Rochelle was first to end, then the IRT replaced the elevated shuttle by a covered walkway a block long to the 133rd Street2nd and 3rd Avenue elevated station (2nd Avenue service only during rush hours), leaving only the NYW&B.  Tracks were left in mostly for deliveries to the IRT, including the 1938-1939 “Worlds-Fare” subway cars.  In 1949 the ERA ran a fantrip using 3rd Avenue elevated ex-subway composite cars, which I rode.  Crossing overhead, was the Willis Avenue streetcar line of Third Avenunue which crossed to Manhattan on a bridge directly to 1st Avenue, with a plow pit at 128th Street, and then ran west along the 125th St. crosstown.  Its north end was at the 149th St. “Hub” of 3rd, Willis Av., WebsterAv. and Boston Post Road.  Triboro Bridge construction spelled its conversion to bus.  The station name was Willis Avenue.
  2. E. 180th still stands, used by physical plant, track, and signal departments of the TA and is in good condition.  The New Haven never used it, and did not have tracks there until for some time they or the transit authority used an ex NYW&B track, only one of the two, to a switch into the NEC near Hunters Pont Ave, but the New Haven never had passenger service there.  All NYW&B trains did stop there, and the 2 and 5 subway lines still do, as did their IRT predicessors, the Broadway-7th Avenue only on special occasions, since it ran normally to the southern Bronx Park 180 stub, now removed.
  • Member since
    May 2012
  • 5,017 posts
Posted by rcdrye on Wednesday, December 31, 2014 6:52 AM

Sadly the WB&A articulated were scrapped. The only WB&A cars resold for further operation went to the CA&E, though some remained in B&A service until 1950. The Shaker Heights lightweights did come after Speedrail assumed operations, having been replaced by SHRTs first orders of PCCs. The heavy articulateds were actually owned by Kenosha Motorcoach Lines after 1944 when the KRM (Kenosha-Racine-Milwaukee) line was spun off, even though they were used in both KRM and TMER&L/Speedrail service until 1949 or so.

On "Union Station" you must be talking about the NYW&B's Harlem River Terminal, served by two IRT lines and the NYW&B.  The other option would be 180th St, served by NYW&B, parent NYNH&H and IRT.

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Tuesday, December 30, 2014 1:04 PM

So, no TMR&L artics came from the WB&A.  But did not the lightweights from Shaker come only after Speedrail assumed operations?
 
Name The Bronx’s single-platform, two-track “Union Station” (not called that!) used by three companies operating passengers services, circa 1924-1933.  Two related companies used one track, a third non-related company the other.   Even after all passengers service to the station, the tracks and stations remained and one track in use for at least one fan-trip, which I rode, after WWII.
  • Member since
    May 2012
  • 5,017 posts
Posted by rcdrye on Tuesday, December 30, 2014 11:33 AM

Shaker Heights never ran articulateds, except for one trial run with a CTS 5000 series car that didn't work on the loop.

TMER&L (Milwaukee) had both city and interurban articulateds.  In the 1920s they rebuilt cars of both TMER&L and Milwaukee Northern heritage int articulated pairs. The 1031-1040 series of city cars (St. Louis Car) replaced the 1181-90 series cars rebuilt from Indianapolis and Southeastern cars at Cold Spring shops.  They were in turn replaced by lightweight cars bought from Shaker Heights, including some ex-I&SE Cincinnati curved-side lightweights and a couple of ex-Aurora Elgin and Fox River cars, which are probably the ones you remember from Cleveland.  An oddity of Milwaukee articulateds is that each half car was assigned its own number.

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Tuesday, December 30, 2014 11:13 AM

Was the Shaker Heights system originally part of Cleveland Railways before Cleveland Transit's forxmation?   I know Cleveland ran articulated new cars on Euclid, then went back to regular Peter Witts, and then back to the new articulateds.   And they did rebuild some old cars into quasi-articulateds, basically motors and trailers permenantly close coupled with a passege between them, but not with a truck under the joint as is typical, if I remember correctly.  And I did not know of Shaker running articulatids.  Perhaps Cleveland Railways had interurban lines to other points and ran the artics there?  I do remember Shaker with a good mixture of cars, ex-Cleveland ceneter-doors and Peter Witts running in trains, mu, PCC's mu, and some lightwieght single cars, Cincinnati curve-sides if my memory is correct.  Then it became alll PCC when the second-hands from the Twin Cities arrived.

The Milwaukee Electric may be another system, and I think it had articulateds homemade from standard heavyweights, some medium weight artics from WB&A, and at the end lightweight Cincinnati curvesides that had replaced heavyweights elsewhere, those also ending up in Milwaukee, replaced articulateds on Speedrail, which had taken over the interurbans, separated  from local transit, although still using some local transit tracks downtown.

When I rode the Milwaukee streetcars in 1952, the only interurban left there was the North Shore, and the only articulated cars were the Electroliners.  The system was still interesting to ride, with the huge trestle on the West Allis line, and the single track through countryside on the North Avenue line.  The PRW and catenary towers of the interurban to the west was still visible.

SUBSCRIBER & MEMBER LOGIN

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

FREE NEWSLETTER SIGNUP

Get the Classic Trains twice-monthly newsletter