The only "effective" HO + N layout I have seen was a wedding cake type display at the Adventure Museum here in Nashville. The Museum has a permanent Lionel display.
A circle of Bachmann EZtrak may be done in 22" & 18" radius. Nscale can be 9"-11" to 15". Each scale can have it's own level, separated by some foam. For small children, you could get a Lionel Thomas set.
For fun, perhaps you can get a similar GP unit & freight cars to make up a train. Schedule the Normal Scale train to appear when the Horribly Oversize one is off stage. The smaller train may appear to be running miles away!
[The Spectrum Connie's a good puller. I had to remove almost half the boiler weight in my kitbash, but she'll still pull the bumper off your car. She's not very quick, but she's strong as an ox.]
***Nice job, Dave. Sounds like it would come in handy for moving furniture. Now if I could afford to buy one on Monday, I would have it for the big move next week from our old cabin into the new house (about 50' away). Then again, I would haveto lay all that tiny track across the yard. Well, perhaps by next Christmas I can swing it. Bottom line is, after reading your post, now I want one. :^) -Rob
Bull86.
As you can see by the number of pages, this is a popular spot. You will get a lot of help from the many knowledgeable people that visit The "N" Crowd. If you have a question, just ask and you will invariably get several QUALITY points of view. One of them should help you out.
All the best in your "N" Scale endeavours.
Blue Flamer.
PS. Thanks again to Dave for starting this thread.
Cederstrand wrote: [I have the Bachmann Spectrum 2-8-0 I turned into a Pennsy H10.]Dave, how would you rate that Bach 2-8-0 of yours? Is it an excellent runner and worth the cost? Sounds like you have some neat conversion projects in mind. What a great hobby!nscaler711, I should have clarified that even my current Bach Northern is not one of the new Spectrums, so that is undoubtedly the difference between my experiences and those who have runners. If you get one, please post what you think of it after a good trial period. -Rob
[I have the Bachmann Spectrum 2-8-0 I turned into a Pennsy H10.]
Dave, how would you rate that Bach 2-8-0 of yours? Is it an excellent runner and worth the cost? Sounds like you have some neat conversion projects in mind. What a great hobby!
nscaler711, I should have clarified that even my current Bach Northern is not one of the new Spectrums, so that is undoubtedly the difference between my experiences and those who have runners. If you get one, please post what you think of it after a good trial period.
-Rob
The Spectrum Connie's a good puller. I had to remove almost half the boiler weight in my kitbash, but she'll still pull the bumper off your car. She's not very quick, but she's strong as an ox.
Here's what she looks like after I was done with her.
And here's what she's trying to be:
Modeling the Rio Grande Southern First District circa 1938-1946 in HOn3.
Great Idea. I just started N scaling, pretty fun.
A place to chat would be great.
-Bull86
Army National Guard E3MOS 91BI have multiple scales nowZ, N, HO, O, and G.
I have the Bachmann Spectrum 2-8-0 I turned into a Pennsy H10.
I'm interested in building a Pennsy M1b 4-8-2 from a Spectrum Mountain. I hear the tender from the 4-8-4 can provide the trucks for a Pennsy coast-to-coast tender as used on the M1b.
Does Any one have a B-mann 4-8-4 Northern?
if so how does she run?
I hope you will forgive an HO interloper, folks, but I couldn't help noticing the huge post and look counts that Dave's timely thread seems to have garnered from the membership. So, I just wanted to congratulate Dave for a good idea, and the rest of you for making a solid go of this thread. It speaks volumes about the popularity of your scale, and that can't help but be good for the hobby in general.
I wonder if MR would consider converting it to a fixture with its own forum...would be handy, if nothing else.
I am sure you are right there, Bob. I didn't think to mention my Challenger, BigBoy, and other larger engines, as my personal favrite is that Mallet I rebuilt. It could probably outpull any two other stock articulates combined without even a hint of wheel spin. ;^) One day, when I have my dream layout built with the really long winding grades, I'll test my assumptions. Ahh, that will be such fun. I want to put 100 cars behind it and see how it does. (((more power....grunt grunt grunt))) :^) -Rob
Or you could try a B'mann J or Athearn Challenger. Each will pull a 30 car train made up of MTL or IM box cars and can ascend a 2% grade without any problem out of the box. I'm not saying that these examples will meet everyones needs, just that they will pull better than most anything currently available whether its diesel or steam. They are not perfect, but as far as traction and electrical pickup, they are what we have asked for in N Scale.
Bob
[I have some news for you, podnah! If you want to pull a 30 car train with an N-Scale steamer you had better be on a down grade!!!]
OR... you can take a Mallet, fill the tender with the largest can motor that can be squeezed into it, fill any remaining gaps with lead, run a shaft with universal into the engine, fill every nook & cranny of that with lead as well, and it will "easily pull 30 cars" for you, no problem! Best pulling brute in my collection by far, including the diesels. :^) -Rob
Thanks for the response on my grade and code 55 questions.
I was able to get a single level of my helix put together for test purposes. It went very well with a Bachmann Consolidtion pulling 35 cars upa 0.6% grade which gave a seperation of top subroadbed to bottomsubroadbed of 2 inches, on .5inch ply. Digitrax throttle was set to between 50 and 60 and the engine pulled very well.
When I get back from my roadtrip I will add a second layer and test again. I will need 8 layers to get from lower to upper level.
Tom
Good evening fellow N scalers!! I have not posted on here before (that I'm aware of), but remembered the site and wanted to share. I have started putting together an N scale layout in my hobby room/home office. It's mostly an around the wall layout, with two larger sections; one 32" x 48" at one end, the other will be 45" x 72" at the other end.
I have yet to name the pike, but I have gotten roadbed down on just under 1/2 of it, and tonight I laid two sections of Atlas flex track. After the glue set, I just HAD to test it, so I put power to the sections, and ran five different engines back and forth a few times!!
So now I have a 36" point to point railroad!! Just wanted to share.
Michael
I would love to share photos of my layout, but presently it is still inside my head. My first Train Room is nearly finished, but still needs a cement floor which will have to wait for more funds. So, at least there has been some progress towards my dream layout.
I collect N scale and tricked...er...I mean "helped my wife discover HO". Both of us have poorer vision than we did when younger, which is why she prefers HO. I've had N from early childhood, so I'm stuck on it. Besides, I really do like the amount of "stuff" one can pack into an N size layout. This brings up a question, although it might be best to post it under it's own subject line(?): Has anyone effectively combined HO & N scales before and if so, are there any examples of it on the web? Would be nice to trick...uh...I mean "include my wife in building the layout".
:^) -Rob
R. T. POTEET wrote: shawnee wrote: Hello N Scalers! I'm an HO guy seriously thinking about switching over to N scale. I've kinda reached the logical limit in my 10x12 layout on what I can do in HO scale without it getting ridiculous. I guess I'll always be tampering with the layout, and recent tamperings have led me to think...may be time before any more investment is made to switch to N. My layout is still very much in basic running/landscape re-shaping stage, haven't really even opened the HO structure model kits I have except for a couple...probably a hundred fifty bucks worth or so. (probably a bit more, but I don't like to count ) I like the smaller scale and it allows more freedom for track in a small space, obviously. I originally went HO just because I had that as a kid, and wanted to share with my kids. I really didn't think "n" at the time, it seemed "small". So, a question...please be sincere with me on this...are there any "downsides" to being in N? Are engines and freight cars harder to come by? Are engines less robust? The structure model assortment seems fine. I've decided to get into custom painting, but is that just a micro-pain in N? Are any of you converts from HO,...and can you tell me what a hassle it might be to change al the stuff I have? What are 1) the things you like best about N, and 2) the things you wish were better, and the things I may miss from HO.Thanks very much...i can really use some reasoned advice, as this is potentially a big move for me. I want to do the best thing, either tough it out in HO or go over the wall to N.Shawnee, I'm not sure just how old you are but there are twelve "downsides" to N-Scale: ten of these are called fingers and the other two are called eyes. And when you get to my age - mid-60s - they get even more "downsides" every year!!!
shawnee wrote: Hello N Scalers! I'm an HO guy seriously thinking about switching over to N scale. I've kinda reached the logical limit in my 10x12 layout on what I can do in HO scale without it getting ridiculous. I guess I'll always be tampering with the layout, and recent tamperings have led me to think...may be time before any more investment is made to switch to N. My layout is still very much in basic running/landscape re-shaping stage, haven't really even opened the HO structure model kits I have except for a couple...probably a hundred fifty bucks worth or so. (probably a bit more, but I don't like to count ) I like the smaller scale and it allows more freedom for track in a small space, obviously. I originally went HO just because I had that as a kid, and wanted to share with my kids. I really didn't think "n" at the time, it seemed "small". So, a question...please be sincere with me on this...are there any "downsides" to being in N? Are engines and freight cars harder to come by? Are engines less robust? The structure model assortment seems fine. I've decided to get into custom painting, but is that just a micro-pain in N? Are any of you converts from HO,...and can you tell me what a hassle it might be to change al the stuff I have? What are 1) the things you like best about N, and 2) the things you wish were better, and the things I may miss from HO.Thanks very much...i can really use some reasoned advice, as this is potentially a big move for me. I want to do the best thing, either tough it out in HO or go over the wall to N.
Hello N Scalers!
I'm an HO guy seriously thinking about switching over to N scale. I've kinda reached the logical limit in my 10x12 layout on what I can do in HO scale without it getting ridiculous. I guess I'll always be tampering with the layout, and recent tamperings have led me to think...may be time before any more investment is made to switch to N.
My layout is still very much in basic running/landscape re-shaping stage, haven't really even opened the HO structure model kits I have except for a couple...probably a hundred fifty bucks worth or so. (probably a bit more, but I don't like to count ) I like the smaller scale and it allows more freedom for track in a small space, obviously. I originally went HO just because I had that as a kid, and wanted to share with my kids. I really didn't think "n" at the time, it seemed "small".
So, a question...please be sincere with me on this...are there any "downsides" to being in N? Are engines and freight cars harder to come by? Are engines less robust? The structure model assortment seems fine. I've decided to get into custom painting, but is that just a micro-pain in N? Are any of you converts from HO,...and can you tell me what a hassle it might be to change al the stuff I have?
What are 1) the things you like best about N, and 2) the things you wish were better, and the things I may miss from HO.
Thanks very much...i can really use some reasoned advice, as this is potentially a big move for me. I want to do the best thing, either tough it out in HO or go over the wall to N.
Shawnee.
I'm pushing 68 and I normally wear Tri-Focals all the time. When I start working on the fiddly stuff, (anything smaller than a heavyweight passenger car), I put on my lighted magnifying visor with double magnifiers and a monacle lense in front of those. When I have the specs and the magnifiers on, even a Kadee Nscale coupler mounting screw looks as big as a Big Boy. But those Jolly Green Giant fingers holding it are something else again.
Even with these minor restrictions, there is still nothing like the Dark Side. So come on over, you'll get lots of help.
From the far, far reaches of the wild, wild west I am: rtpoteet
tjerrard wrote: Thanks for the info.Another question - how do you guys find Micro Engineering code 55 flex track to work with and operate on?Tom
Thanks for the info.
Another question - how do you guys find Micro Engineering code 55 flex track to work with and operate on?
tjerrard wrote: Would like to know the thinking on grades in 'N' and steam engines. What is the general feeling of max grade for N scale steam with say a 30 car train?Tom
Would like to know the thinking on grades in 'N' and steam engines. What is the general feeling of max grade for N scale steam with say a 30 car train?
I hadn't been on the computer for a week and went looking for The "N" Crowd to catch up on the latest . I finally found it 10 pages back with nothing new added since I was last on line. I guess we are all getting better at what we do in N Scale.
Hopefully, this little note will get The "N" Crowd to the forefront where it belongs.
Best to all.
*************************************************************************
Yes, Shawnee, there are downsides to N. The biggest is the vastly greater array of products available for HO. This is most apparent once you get before the transition era, and 19th century rolling stock is almost non-existent. The other big product availability gap is with scenic accessories, especially vehicles. The choice of vehicles in N scale is much smaller than HO, and is almost tragic once you get out of the Transition Era, regardless of whether you're coming uptime or heading downtime. The best way to get a handle on whether the disparity will affect you is to pick up a copy of the Walther's N Scale catalog and then see how much of the stuff you have in HO is available in N.
A second downside is the advantage all the larger scales have when it comes to implementing sound. Physics don't care that we want better sound, a smaller speaker just ain't gonna have the downlow oomph of a larger speaker. And that's when you can find a place for the speaker!
Finally, there's a third downside. N scale doesn't save you any money. Instead of running 15 car trains, you run 30. You can justify putting an ABBA set on the head of a train without it looking dorky, but that just means you've got 40+ cars and 4 locomotives where in HO you did with an AB set and 20 cars. More turnouts in a given area. Etc, etc....., although you can reduce the density somewhat in order to "open" up the layout (and save money to boot!)
Those are the downsides, for most of us posting in this thread, the upsides outweigh the downs. Scenery is grander, trains are longer, etc.
I generally put it this way:
Grace and peace, BD - happily modelling in N scale for 4 years, yet still envying HO's 19th century goodies and modern vehicles.
Shawnee, IMHO no scale likes a steep 3% grade. In Nscale, the best haulers tend to be cab style (E/PA or F/FA) diesels. It's hard to beat an ABBA set of FT's with 16 wheels picking up current & suppling power.
Comparing Horribly Oversize to Normal, there may be a few models not yet produced for N. Atlas seems to be the leader in filling some of the gaps. You get decent coverage of EMD, GE, Alco, with some FM's. Not many Baldwins, no Lima or other small builders. Quality is something to watch out for. Your LHS should have a try before you buy or a liberal return policy if something is out of wack. Many models won't survive in a rough handled drop to the floor. You need a well lighted area when you do any work. I suggest getting an Ott Light work light & an Optivisor in your tool set. You will also need a set of smaller screwdrivers & other tools. Check out the MicroMark catalog.
The last thing you will need is a good digital camera. Get something that can get a good picture of a business card. Bring your photos over to forums like Atlas SNFF & others. Nscalers like to see the models you are building!
Thanks for the info...It's a big move for me to come over to N, since I have so much HO stuff. But it perhaps is a good move for me now, since I'm about to change my layout and especially since a lot of my HO structures are still in the box..it's really just benchwork, track and some scenery now. I model contemporary era, not diesels. I want to paint my own freelance road, but am not hyper about micro-detailing. I like big scenery. My current HO layout occasionally seems a joke in size on a 10x12...and my family is not likely to grant me more room. I'm in Kato Unitrack on HO anyway, and like the Kato stuff, so it would be comfortable for me to switch to Kato N. So there's not a lot of roadbed to rip up either. There's so much more in Kato N.
Wish I wasn't so boneheaded and looked into N a year ago.
Can N engines handle (long, gradual) 3% grades? I have a coal area on top and one branch reaches that high, and I kinda like my mountain rail. I've had no problem with my HO Katos on that grade...
Only other down size besides current inventory is my kids like HO. It may be easier for them to handle.
Thanks guys. I think I'll go to LHS this weekend and look harder at some of the models and get a better sense of the size. It'sa definitely worth considering.
to Shawnee
Normal Scale jus plain an' simply rocks
its really good for scenery, large switching industries, long freights/passanger service, also it looks good too
the only few downsides are u need a magna-fying glass to read warning labels, not many products out there and yes they will break if dropped an height of about ur waist. but thats about it. Also
Welcome to the dark side nah jus kiddin
question for all
why do they call most n-scalers the 'dark side'?
Shawnee: I'm a recent Converty from HO to N. I'm glad I did I can do alot more Railroading in the same space. The Katos are just as good as they are in HO. The Atlas engines are pretty good too. The track less forgiving but if you take your time its great.
To Everyone else: Yesterday I started to rip up about 30 feet of mainline due to a major realignment(Benchwork and everything) Today I finished ripping it up, after dinner(now 5:10PM EST) I'm gonna start rearranging the benchwork and adding to the benchwork. I'm hoping by friday afternoon(Spring Break starts on Friday) I will have the mainline back in service and most of the switches that directly effect the mainline back in too.