ATLANTIC CENTRALBut the biggest laugh for me is the small layout thing. I would sell it all and just put a few favorites on display rather than settle for some 12' long point to point shelf. Of course my layout philosophy is large but simple, for long realistic trains.......... So here I am, Lance's worst nightmare, still DC, relay based signals, no sound, 1000 sq ft layout room, and no need to change a thing. BUT, I do have signals, CTC, ATC, working interlockings, radio throttles, solid state inductive detection, scale coupling distances and working diaphragms on passenger cars, broad curves, realistic 1950's train lengths, and last but not least......Victorian houses........
Mike
rrebellOne note, batterys come into full vouge when you have a large layout with lots of ladders and sidings. Cleaning track on the mainline or a siding or two is no big deal, cleaning track on a large layout with 50 or more turnouts, some on setouts only a foot or two long can be a real chore along with maintaining electrical contacts needed at turnouts etc.
Not for me. My previous layout had over 50 turnouts in various configurations. Track cleaning took about 30 min with a track cleaning block. I did not use a cleaning car, because I did not feel the need to purchase one for my own use.
BMMECNYCYou still need to charge them, which means a charging circuit and a plug jack that would need to be hidden; or cyclic stress from handling the locomotive/removing the access plate to get to the battery.
rrebell One note, batterys come into full vouge when you have a large layout with lots of ladders and sidings. Cleaning track on the mainline or a siding or two is no big deal, cleaning track on a large layout with 50 or more turnouts, some on setouts only a foot or two long can be a real chore along with maintaining electrical contacts needed at turnouts etc.
One note, batterys come into full vouge when you have a large layout with lots of ladders and sidings. Cleaning track on the mainline or a siding or two is no big deal, cleaning track on a large layout with 50 or more turnouts, some on setouts only a foot or two long can be a real chore along with maintaining electrical contacts needed at turnouts etc.
Respectfully, I have been involved with a lot of large layouts in my 47 years at this hobby, track cleaning has never ben a big problem from what I have seen.
Sheldon
Here is my prediction, the hobby will continue to become more diverse........
Lance seems to be amoug a group that would like to think they can reshape the hobby in their own image, example, the thread about his last article and structure selections.
Not unlike Mke Wolf or Bob Grubba who think they can turn HO into a smaller version of advanced highrail collecting........
It has taken 25 years for DCC to reach a 50% market penitration in HO & N. Direct radio and or dead rail has a pretty tough up hill battle.
Same goes for sound. If we grant that the modelers on this forum are likely more tech oriented than most, and we consider the conversations about sound that have been on here, sound too is only at a 50% use/popularity.
If Lance thinks most modelers are going to wear headphones to run trains, I think he is off the mark.....by a good distance.
But the biggest laugh for me is the small layout thing. I would sell it all and just put a few favorites on display rather than settle for some 12' long point to point shelf.
Of course my layout philosophy is large but simple, for long realistic trains..........
So here I am, Lance's worst nightmare, still DC, relay based signals, no sound, 1000 sq ft layout room, and no need to change a thing. BUT, I do have signals, CTC, ATC, working interlockings, radio throttles, solid state inductive detection, scale coupling distances and working diaphragms on passenger cars, broad curves, realistic 1950's train lengths, and last but not least......Victorian houses........
I know an entity still running Win 98 but not connected to net. Doubt thats possible.
IMHO
For Battery Power to take off there will need to be standards just as there are for DCC, track gauge, etc. Until that happens there will just too fragmentaion of the market for battery power market to foster adoption in the larger MRR comuny
Joe Staten Island West
cuyama slammin this seems like a tempest in a teapot. Whatever the new technology is, no one is forced to adopt it. +1
slammin this seems like a tempest in a teapot. Whatever the new technology is, no one is forced to adopt it.
+1
How many of you are still running windows XP and are connected to the internet?
On a model railroad, maybe not ever.
BRAKIE BMMECNYC Maybe Lance and MR are in the pocket of "big battery"? In the gaming world some wireless controllers uses AA batteries.. My Nikkon and Canon cameras uses double AAs. A choice had to be made I could buy batteries by the case or buy rechargeable. I bought XTech rechargeable with charger and a extra 12 pack of batteries which gave me 16 batteries. 10 for my cameras and 6 for my Xbox Controllers.. Yes,that was overkill but,it nice to know you have enough batteries while railfaning.
BMMECNYC Maybe Lance and MR are in the pocket of "big battery"?
In the gaming world some wireless controllers uses AA batteries.. My Nikkon and Canon cameras uses double AAs.
A choice had to be made I could buy batteries by the case or buy rechargeable. I bought XTech rechargeable with charger and a extra 12 pack of batteries which gave me 16 batteries. 10 for my cameras and 6 for my Xbox Controllers.. Yes,that was overkill but,it nice to know you have enough batteries while railfaning.
My comment was a joke. The fact that you feel a need to keep extra batteries around lends credence to my point.
BRAKIETwo rechargeable AA's could be used to power our locomotives.
But why would you want to? You still need to charge them, which means a charging circuit and a plug jack that would need to be hidden; or cyclic stress from handling the locomotive/removing the access plate to get to the battery.
Also thats only 3V dc (2xAA). Enough to turn on the LEDs. You could also turn the motor slowly.
Layout Design GalleryLayout Design Special Interest Group
BMMECNYCMaybe Lance and MR are in the pocket of "big battery"?
Two rechargeable AA's could be used to power our locomotives.
Larry
Conductor.
Summerset Ry.
"Stay Alert, Don't get hurt Safety First!"
This is a thread about nothing IMO. If batteries is what the future brings then so be it. Besides it is one guys opinion. I run mostly DC but I do run dcc at a flip of a switch.
I don't need to change just because something else is invented on how to run our trains. Don't worry about the small stuff you cannot change.
mlehmanWhat always strikes me is how some of us who'll likely not be around in 20 years anyway seem to care about it most.
I plan on being here in at least 45 years.
BMMECNYCThe point Im trying to make is that I dont want to have to buy locomotives equiped with electronics and batteries I dont need, then have to buy more parts to run a train with a simple power pack or a DCC system.
I really doubt that track pickup will ever go away. Far too much installed infrastructure/market share for mfgs to ignore and the technology -- a little brass strip and some wires -- is simply too cheap to not include.
On the same note, new technology like deadrail only becomes standard equipment when it's cheap enough that rolling it into the MSRP is hardly noticeable. We've barely arrived at that point with DCC after a 1/4 century.
The future will be here eventually. What always strikes me is how some of us who'll likely not be around in 20 years anyway seem to care about it most. I suspect that Ebay and used equipment dealers at train shows (course that opens up another line of things to worry about being gone... ) are unlikely to run out of old school stuff to buy and use in any case, so I'm not too worried about the future, even if I was bound and determined to live in the past as much as possible. That ability to access, pick and choose whatever technology you wish is one of the great and persistent strengths of our hobby.
Mike Lehman
Urbana, IL
slamminWhatever the new technology is, no one is forced to adopt it.
Yet.
slamminI would guess that over half the modelers are still running DC.
I dont disagree with that statement.
slamminBattery operated models may be the next "big thing" but if it doesn't interest you, ignore it.
When you dont express your opinions the vocal minority will carry the day.
BMMECNYC Doughless Unless a person is compelled to keep up with new technology just for the sake of it, nothing about running DC current from a house, to the rails, to the locomotive motor will ever be obsolete. Manufacturers could conceivably start making locomotives with out track pickup, because they will be battery powered. So then your options for RTR become: DC, DCC, DCS, Blurail (track power), Blurail battery powered, wireless (other) battery powered.
Doughless Unless a person is compelled to keep up with new technology just for the sake of it, nothing about running DC current from a house, to the rails, to the locomotive motor will ever be obsolete.
Manufacturers could conceivably start making locomotives with out track pickup, because they will be battery powered.
So then your options for RTR become: DC, DCC, DCS, Blurail (track power), Blurail battery powered, wireless (other) battery powered.
If the market drives the switch, that will take a long time. If it were to happen overnight, there would seem to have to be some major collusion amongst the producers; or, that big factory in China that produces all of the trains would have to say nomas to truck pickup and force that decision on the producers/importers.
But I do understand the confusion about Lance talking about the switch over to battery. He doesn't spend money on new locomotives just for the sake of it, and as far as I know, uses about three total. The CSX GP38-2 that is often photographed is a Proto 2000 unit that Walthers stopped making about 15 years ago, not even DCC ready, so why Lance is speaking about evolving locomotive technology is a bit baffling to me.
- Douglas
Water Level Route BMMECNYC Manufacturers could conceivably start making locomotives with out track pickup, because they will be battery powered. Possibly, but even if that were to become the norm, I have to believe someone would begin producing aftermarket pick-ups to be easily added on.
BMMECNYC Manufacturers could conceivably start making locomotives with out track pickup, because they will be battery powered.
Possibly, but even if that were to become the norm, I have to believe someone would begin producing aftermarket pick-ups to be easily added on.
The point Im trying to make is that I dont want to have to buy locomotives equiped with electronics and batteries I dont need, then have to buy more parts to run a train with a simple power pack or a DCC system. Maybe I am off base here, but I suspect that there is a majority of modelers who dont want the hassle that comes with battery powered electronics brought into their train room, when properly executed wiring (one time expense) and periodic track cleaning (yes it can be annoying, but running a quality cleaning car in a train allieviates that) solves most of the complaints about the current accepted and reliable practice of power through the rails.
While I must thank the OP for starting a new thread when there has been a lack of new threads lately, this seems like a tempest in a teapot. Whatever the new technology is, no one is forced to adopt it. DCC was first discussed in the Oct 93 MR. Over two decades later most manufacturers are still offering DC locos and the secondary market is flooded with NOS engines. I would guess that over half the modelers are still running DC. Battery operated models may be the next "big thing" but if it doesn't interest you, ignore it.
BMMECNYCManufacturers could conceivably start making locomotives with out track pickup, because they will be battery powered.
DoughlessUnless a person is compelled to keep up with new technology just for the sake of it, nothing about running DC current from a house, to the rails, to the locomotive motor will ever be obsolete.
BMMECNYC Now it is being suggested that in the future I have to charge my trains prior to an op session, and the length of said op session is dictated by battery life?
Now it is being suggested that in the future I have to charge my trains prior to an op session, and the length of said op session is dictated by battery life?
I'm not sure I follow the bolded. Unless a person is compelled to keep up with new technology just for the sake of it, nothing about running DC current from a house/powerpack, to the rails, to the locomotive motor will ever be obsolete. You will always have the ability to run trains for the rest of your life without ever having to consider battery power or any other change in MRR technology, IMO.
For his simple ops, Lance doesn't even have to run DCC, but he does. So I'm still trying to figure out his previous step up in technology, let alone a move up to battery.
The future of model railroad technology, or technology in general, is not my concern since I only buy what makes sense for how I use it.
I read Lance Mindheim's article in this months MR, in the first section about barriers, he missed an important point: cost of implementation. It seems that he has dismissed this as an issue for people. Given his style of model railroading, its understandable. He does not build large layout empires, or run more than one or two trains at once (from what I have read from his books and published articles).
Individual unit cost of batteries and wireless decoders has been discussed ad nauseum on this forum. Add in the suggested cost of a wireless headset for sounds. I already find it a pain to have to charge by phone battery. Now it is being suggested that in the future I have to charge my trains prior to an op session, and the length of said op session is dictated by battery life?
A quick note about planned obsolescence. Its not being discussed in the model railroad press, but it is something you see in every day life. The components you use to make a battery powered train today may not be available in 10 years. That rechargable battery pack starts to loose amp-hour rating as you use it. Eventually it will not hold a charge sufficient to complete an operating session. You may then find yourself searching for a "comparable replacement" since the original design battery is no longer availble. Great, you'll probably end up with a better battery. But what are the chances that you will have to modify how the battery is inserted into the locomotive, or the locomotives onboard charging circuitry will have to be replaced?
I do not believe that batteries are the future of model railroading. I base this on my past experiences with cell phone batteries, and my 9 years experience in the service, where I watched one the most advance battery designs be ruined permanenty by one discharge cycle. <--That battery is why I am able to type these words today.
Maybe Lance and MR are in the pocket of "big battery"?