Good subject to wake up the geezers. Watch your blood pressure.
Rich
If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.
Although I belonged to the NMRA back in the late 90's - 1990's that is - for a couple of years, I let my subscription lapse while my interest in model railroading waned some. It's always been peaks and troughs with me. Retirement has now meant I have the time and inclination to become involved with this hobby once again but, my spending allowance doesn't include too many subscription renewals.
I have just recently re-subscribed to MR and swap this with a my cousin for his RMC indicating perhaps the nature of our budget constraints.
Bruce
I was a member for a year while I was in high school. Unfortunately, at this time the NMRA was fundraising to build their headquarters building. I got tired of the fundraising in the magazine. Didn't re-up.
I may look at membership again, if only for the insurance benefits.
CLICK HERE FOR THE CSX DIXIE LINE BLOG
ndbprr wrote: One article was how to make a strip club with a nude dancer on stage. Just what I wanted my child to see. That was the only model rail publication I ever had to hide.
Well I'm shocked and disgusted to hear about that. Do you remember what month and year that article was in so I can get a back issue....um, you know, so I can see just how shameful it is...
No. No benefit.
Jimmy
ROUTE ROCK!
I am a member of the NMRA and I can't wait for Scale Rails to arrive in my mailbox every month. I read every issue cover to cover and mostly scan through the photos in MR.
Don Z.
Research; it's not just for geeks.
Check out the Deming Sub by clicking on the pics:
Yes, I am a member. Best feature are the regional conventions - most of the clinics are really excellant and the silent auctions are fun and a good way to turn unusable kits into cash. I have also used the research service a couple of times and I often find magazine interesting but I would not join just for the magazine.
Mike B.
ARTHILL wrote: YesStandardsScale RailsAccess to Divison and Region eventsLayout tours.
Yes
Standards
Scale Rails
Access to Divison and Region events
Layout tours.
Ditto on all answers.
Engineer Jeff NS Nut Visit my layout at: http://www.thebinks.com/trains/
I joined around 2000 and had full membership for a few years. Then when the cost started rising, I first dropped the Bulletin and eventually let my membership lapse completely during a round of household budget cuts. The Bulletin did have some good content, but as a professional journalist, I must say it's an editing nightmare. My local division (Fox Valley) is a good group and runs a nice annual show at a local junior college.
Jim Dudlicek
Hoffman Estates, IL
Joined in 1962, and attended my first conventions in 1963. Became a Life Member when they kept increasing the dues. Probably would have dropped out when the PCR split, if is wasn't for the Life Membership. The original Bulletin was an 11x17 sheet folded into quarters and not worth much. When Whit took over, it greatly improved and became worth reading. Course, there was some controversy in it; something about outhouses and ALP operators going out on strike. But when he quit, the Bulletin became just another throw-away newsletter, not worth keeping, and changing the name didn't help either. However, since Stephen & Cinthia Priest have come on board, it has become very good, although I don't have any interest in becoming a MMR. In fact if Scale Rails & MR come at the same time, I read Scale Rails first.
Bob Hayes
tomikawaTT wrote:Well, the Pike Registry went away, and the infighting in the old NMRA Bulletin started getting a bit to acerbic for this laid-back modeler, so I let the membership lapse.Chuck (modeling Central Japan in September, 1964)
Well, the Pike Registry went away, and the infighting in the old NMRA Bulletin started getting a bit to acerbic for this laid-back modeler, so I let the membership lapse.
Chuck (modeling Central Japan in September, 1964)
Chuck, I don't know if it disapeared at some time, but it is very much in existance now....
http://www.nmra.org/membership/pikes/index.html
Ray Seneca Lake, Ontario, and Western R.R. (S.L.O.&W.) in HO
We'll get there sooner or later!
I joined the NMRA during the Whit Towers era, and remained a member for about ten years. During that period, the NMRA would publish a Members' Roster - very handy for meeting model railroaders when moving to new locations.
Well, the Members' Roster went away, and the infighting in the old NMRA Bulletin started getting a bit too acerbic for this laid-back modeler, so I let the membership lapse.
Several years ago, I happened to be passing through Chattanooga, so I stopped at NMRA headquarters. While there I paid for a 2-year membership. It has since lapsed.
The NMRA is a useful organization which has done much to advance the hobby. It just doesn't meet the social or modeling needs of a confirmed lone wolf whose prototype operated on the far side of a rather wide ocean. If this be heresy, so be it.
gandydancer19 wrote: twhite wrote: No, but pretty much just because I'm a 'lone wolf' who just doesn't join organizations. However, like Crandell, I admire the work that the NMRA has done to standardize a lot of things. I think they've saved us a lot of grief in certain aspects of standards and operation. Tom Me too!However, I was a member for a year "way back when" until "NMRA someone" started telling me my cars had to be a certain weight, and other things that I saw as optional for my home RR. I didn't need that. OK, so it may have been one bad egg, but it had an infuence on me at that time.
twhite wrote: No, but pretty much just because I'm a 'lone wolf' who just doesn't join organizations. However, like Crandell, I admire the work that the NMRA has done to standardize a lot of things. I think they've saved us a lot of grief in certain aspects of standards and operation. Tom
No, but pretty much just because I'm a 'lone wolf' who just doesn't join organizations. However, like Crandell, I admire the work that the NMRA has done to standardize a lot of things. I think they've saved us a lot of grief in certain aspects of standards and operation.
Tom
Me too!
However, I was a member for a year "way back when" until "NMRA someone" started telling me my cars had to be a certain weight, and other things that I saw as optional for my home RR. I didn't need that. OK, so it may have been one bad egg, but it had an infuence on me at that time.
I don't remember anyone ever telling me that my cars
had to be a certain weight;
that is a Recomended Practice and it is a good one because it works; those recommended car weights means that my trains tend to operate with a certain measure of reliability. Nobody says that you have to comply with that practice but if you have a (light) car that tends to derail during a "shove" through a switch you might understand why a particular weight is recommended.
I joined the hobby at the tail-end of the brouhaha over couplers. Now, the X2F coupler, as unprototypical in appearance as it might be, at least established a measure of compatability to the hobby which previously had been missing. Manufacturers conformed to the recommendation and when I got in the hobby I could remove a car from its box, place it on the track, and it coupled to every car on my track. When I joined a club in '65 I encountered a myriad of Mantua Couplers, and Baker Couplers, and I can't remember all of the other names; these were namesakes from the forties and fifties. All were out of production by that time and if you didn't go with Kadees then the X2F was what you had to go with. The club was trying to mandate Kadees as mandatory but were getting considerable opposition from those who opposed the additional expense; I remember buying Athearn cars for $1.29 in those days. I'm not sure just what the cost of Kadees were in those far off days of yesteryear but I do know that they were just a little beyond my budget and that was true with a majority of this club's membership.
Just because somebody makes a recommendation--I once bought a 1978 Dodge Aspen based upon somebody's recommendation; they hated me--it doesn't follow that they are twisting your arm; every language in the world has a word 'no' in it!
From the far, far reaches of the wild, wild west I am: rtpoteet
You betchum, Red Ryder!
I have had a Life Membership since 1974. The NMRA's Standards and/or Recommended Practices means that: my track works; if wired correctly and some idiot hasn't either reversed the wheel pickup or the motor connections--I encountered that one time--my locomotives will all run in the same direction; that if I ever get around to getting into DCC my controllers and decoders are going to work properly; my membership allows me to attend the national conventions and brush shoulders with fellow model railroaders from all over the country--and the world too, for that matter--and indulge in entertaining and useful clinics and free admission to the National Train Show; etc; etc; etc!
This is only a partial rationale for my membership in the NMRA; I feel that any organization which has done so much for the enjoyment of this hobby is worthy of my support!!!
Elmer.
The above is my opinion, from an active and experienced Model Railroader in N scale and HO since 1961.
(Modeling Freelance, Eastern US, HO scale, in 1962, with NCE DCC for locomotive control and a stand alone LocoNet for block detection and signals.) http://waynes-trains.com/ at home, and N scale at the Club.
No, I'm not a member. I would be if the cost were less (same reason I don't subscribe to Model Railroader).
I'm grateful for the standardization.
I'm not sure I agree with the concept of certifications, but right now they seem to have no real effect on me. If we start seeing products labeled as "only available to NMRA certified track layers, scenery gurus, figure painters, etc." then I'll become concerned. If my income reaches the point that $55 per year doesn't raise my blood pressure, I'll be signing up.
Phil, I'm not a rocket scientist; they are my students.
I had been putting it off forever (since like 1973). Then a couple years ago I decided it was time. I called up to join and was told the "lifetime" membership option had been discontinued, so I still haven't joined. The new membership process is so confusing, I don't want to take the time to figure it out. Start a simple lifetime option again and I'll probably join.
Another issue with the NMRA is how hard current members are on new members trying to get their achievment certificates. If the "judging" for the achivements 50-30 years ago would have been as hard as it is now, there would be zero master modelers.
As a prior posted noted, there have been recent threads on this forum related to both who is a member of NMRA and why, and their Master Modeler program.
I'm not a member, but have been seriously thinking about it. Especially with their 6-month rail pass tryout for $9.95! My problem is time, I don't have much free time as it is. But we'll see.
Keith Baker
Though I can't participate in the meetings I support the NMRA as a member. They do a great job with our hobby and that's worth it.
Wolfgang
Pueblo & Salt Lake RR
Come to us http://www.westportterminal.de my videos my blog
Yes, since the 60's although I generally am not much of a joiner. As for the NMRA not reaching out to someone, they probably don't know anything about that someone who isn't interested or hasn't made any effort to find out about the NMRA.
I have made some close friends from my membership, and a lot more friends because of my association with NMRA, and I wouldn't think of not belonging. The new NMRA publication alone is worth the price.
Bob
Card carrying member! Like any organization there are advantages and disadvantages to membership. The only disadvantage that I can think of though, is the cost. Personally I feel I get more than my money's worth. If you haven't, take a look at trhere website: http://www.nmra.org/ You can find many, many reasons to become a member just on the main page. I am currently working on several of the Acheivment Program Certificates and can honestly say my modeling is much better for my involvment.
BTW, I will be a presenter at next weekends Lakeshores Division, NMRA Meet in Oakfield, NY. If you are nearby, stop in and say hello and enjoy the fun. http://www.lsdnmra.org/
Tom View my layout photos! http://s299.photobucket.com/albums/mm310/TWhite-014/Rio%20Grande%20Yuba%20River%20Sub One can NEVER have too many Articulateds!