Morning folks!
Looks like winter is still trying to rear it's head in the springtime! Low 40's this morning and high is supposed to be in the 50's...."this is the day the lord has made, let us rejoice and be glad"...
bjdukert wrote: Ryan Look'n good!!!
Ryan Look'n good!!!
Thanks Bob! Some of my motivation and inspiration comes from you and your layout project!
JimRCGMO wrote: Ryan, I like your progress, and that EMD 567 engine. Did you paint any detail areas, or other colors than silver all over? That craftsman one looks really sharp, but I will need to look at how much time and $$ might be invested in making it look that good...
Ryan, I like your progress, and that EMD 567 engine. Did you paint any detail areas, or other colors than silver all over? That craftsman one looks really sharp, but I will need to look at how much time and $$ might be invested in making it look that good...
Jim you know I might be leaning toward your way of thinking too in regards to the time and money scenario! I spray painted all the parts while they were still attached to the sprues with some silver metal enamel from a spray can. I will most likely fill some of the gaps with Squadron Putty and then apply another light coat of silver metal spray paint again.
Dick thanks for the safety tips. I too have some ABC extinguishers, one in the train room, one near the washer/dryer area, one in the pantry near the kitchen and one in the mud room next to the garage.
Garry good one...Depends...
RT good luck in SC, and sounds like things are moving right along!
pcarrell wrote: JimRCGMO wrote: PC, got a little excitement over your way, huh? Your whereabouts have been vouched for at the time of the robbery, right? You know, it's funny.....they weren't really interested in a middle aged overweight white guy.
JimRCGMO wrote: PC, got a little excitement over your way, huh? Your whereabouts have been vouched for at the time of the robbery, right?
PC, got a little excitement over your way, huh? Your whereabouts have been vouched for at the time of the robbery, right?
You know, it's funny.....they weren't really interested in a middle aged overweight white guy.
Oh PC......so that's your MO!
Flash nice Picasa photo galleries, thanks for sharing them!
Hey Sue, the Spruce Goose eh! Yea, the Aviator was a good movie, quite a bit long but good!
bogp40 wrote: Ryan: great prime mover, too bad you can't find some loco and cut up the long hood and place it or just have it missing ready for the transplant.
Ryan: great prime mover, too bad you can't find some loco and cut up the long hood and place it or just have it missing ready for the transplant.
Bob K ya know I been thinking of cutting up one of my old Tyco locos just for the purpose of showing a rebuild in progress scene, and the prime mover would be a perfect for that!
Howdy Luc good to see you dropping in lately!
TTFN,
Ryan
Ryan BoudreauxThe Piedmont Division Modeling The Southern Railway, Norfolk & Western & Norfolk Southern in HO during the merger eraCajun Chef Ryan
***Jeffrey, with the Flood Warning up there, do your "little people" take any extra precautions? Do the incidents of derailments increase any?
Well, heading back for some more sleep if I can get it. Rob
Good morning
Happy MRRing
I see Bill is buying this morning. I'll have biscuits and gravy.
Good morning.It's a foggy morning here in central Louisiana with a current temperature of 64 degrees, expecting a high of 80 later today under a partly cloudy sky.Today's Weather for: Sundown, LA 71446-6114 4/3/2008Wind Chill: 65°FHumidity: 99%Dew Point: 65°FSo Far TodayHigh: 65°FLow: 63°FRain: 0.00"Rain Rate: 0.00"/hGust: 8mph NNE *** FLOOD WARNING ***The Flood Warning Continues For The Sabine River Near Bon Weir. * Until Further Notice...Or Until The Warning Is Cancelled. * At 8:15 PM Wednesday The Stage Was 31.7 Feet. * Minor Flooding Is Occurring And Moderate Flooding Is Forecast. * Flood Stage Is 30.0 Feet. * Forecast...The River Will Continue Rising To Near 33.0 Feet By Friday Early Afternoon And Remain Steady. * At Stages Near 33.0 Feet, Moderate Lowland Flooding Will Occur. Low-Lying Roads And A Few Homes Have Some Flooding Between Bon Weir And Merryville. Camp Houses Along The River In Southwest Vernon Parish Begin To Flood.Today High: 82 Partly sunny. Highs in the lower 80s. South winds 10 to 15 mph. Tonight Low: 68 Mostly cloudy. Lows in the upper 60s. South winds 10 to 15 mph.
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
JimRCGMO wrote: OzarkBelt, good to see you back in (and that you've been busy on the MRR'ing). How's your revamping of the layout coming along - do you have much to go yet?
OzarkBelt, good to see you back in (and that you've been busy on the MRR'ing). How's your revamping of the layout coming along - do you have much to go yet?
I'll have the usual...
Its coming... got a while to go, though. Right now, I'm working on combing a Walthers Magic Pan Bakery with a Pikestuff Enginehouse, parts and peices of a Walthers Glacier Gravel co, and an Atlas Roundhouse to make a credible paper mill. got a while to go. I'll post pic's when i finish.
"He is no fool who gives what he cannot keep to gain that which he cannot lose." - Jim Elliot Visit my blog! http://becomingawarriorpoet.blogspot.com
Good Morning All,
A regular to go please. It may be spring and getting lighter earliier, but we got down to the teens on temps last night and it really doesn't feel springlike yet. Still lots to do, but we're catching up. I have to dismount/mount almost 2 dozen racing tires today and finish up a couple of other jobs so we can look at whats left before loading this weekend.
RT- way to go with the physical and good luck. PC is probably happy he doesn't need printing what with that collection of empty pie plates down at the police station covered with his prints.
Good to see Luc and Bob (BOGP40) dropping in. Not much to report on the layout - been too tired to do much so I'm just planning the next few things before starting up again.
Getting the call back into the shop. CUL, J.R.
Good Morning all,
Another bright day here in Boston, and at least it is supposed to stay. Yes Dick you were right the other day, You get the weather an hour or so before we do at the coast. That sunny Monday turned to rain. No additional news about the crash in Canton. Now that is under investigation, we probably won't hear much for a while. Usually many guys at the club always have the goods on any train related incidents, nothing yet, only speculation.
Philip: So glad things are much improved at home. I am always blown away with so many helpful people during time of crisis. The Methodist Woman took turns making dinners for us during April's ordeal battling cancer. I had to tell them when I wanted to make a meal myself.
Sue: That Spruce Goose is really immense, Saw it in Long Beach years ago when it was next to the QE II. Hard to believe that that thing did actually fly (sort of).
Paul: So sorry for the lost of your good friend. He seemed like quite the fighter to the end. Thank God he had your support, must have made things a little easier.
Get back later, have to run....Lots of wood w/ my name on it today.
Modeling B&O- Chessie Bob K. www.ssmrc.org
Good morning all,
Dick, I was going to invite everyone from the diner over for a cup of coffee and a paint people day, LOL.
Item number: 150231726883 300 painted N-Scale people 13.86 http://stores.ebay.com/WEHONEST
We shall see when they arrive if I got a bargain or not. They have people from O to Z. Some even painted.
Well if anybody is in Cleveland, OH on 17MAY08 from 1000 - 1600 we are having an open house at the base.
Ok, time to go to work!
Lee
BM1 Lee Soule USCG (ret) L.S.&W Railroad Serving the Lower Great Lakes
Good Morning from Tipton IN !
Bill Tidler Jr.
Near a cornfield in Indiana...
I need to go to bed. Good night!
JimRCGMO wrote:
I know that it is a little late, but I thought that I would stop by for my fix. Gotta have that rootbeer float. Thanks, Jim.
I appreciate the kind thoughts on our #7, Jim and Rob. Did you notice the name, S & L Timber on the shay? Just a little personal touch.
Gav, The creek bed will be dry until Larry gets moving on his trestle. We have enough elevation drop that it should be a mess.
Rob, Glad to hear that someone else is too lazy to put the auger on the pto, too. I figure that I am good for 3 manual auger posts or 12 PTO posts. Hmmm. Sounds like work.
Ryan, Thanks for the photo updates. Looks like you are progressing well.
Dick, How is bowling coming? Our local bowling alley was flooded in December. Three feet of water on the lanes. When finished, there will be all new lanes.
No layout time today. We went to the Evergreen Flight Museum in McMinneville, Oregon. They have the Spruce Goose on display. There was enough room under the wing span to park a couple of small airplanes like a DC-3 and a SR-71, and smaller planes under their wings. Now I want to watch the Aviator again.
Sue
Anything is possible if you do not know what you are talking about.
Flashwave- excellent pics, what does CMPA (IIRC) stand for? Good pics of Skagway too.
A tall cool glass of water, please & thanks.
***RT, congrats on passing. Hope you get a decent offer when the time comes.
***Paul, you have a pretty typical farmers attitude there. I would like to plant some kind of super fast growing grass in our pastures that the horses could eat. With so little out there right now, I would just be feeding all the passing birds.
Spent most of the evening taking pics of stuff to sell and running them through Photoshop. A few train cars I'll have to shoot over again tomorrow. Then tomorrow night I will list it all and cross my fingers. "I WANT AN ATHEARN BIGBOY" Maybe I am suffering from "The Hoople Effect"
Rob
Evening Gang: I seeded the areas in the field across the creek that I had filled in last month. I put out Johnson grass seed because I wanted to get a good stand for sure. Of course since I want it to grow there it won't. If I didn't want it there it would grow.
Luc good to see you in the dinner. So how's everything going?
I'm still waking up around 3am and having trouble going back to sleep. It seems that if I have something to eat helps but it still takes a couple of hours. Maybe tonight will be different. I ought to go down to the basement and work on the MRR. Atleast I'd accounplish something.
Time to check my E-mail and hit the sack.
Well got word today passed the physical so now just waiting for finger prints to come back not worried about them . But then they'll call and offer me an appointment and give me the details like how much an hour.
Not to much else happening getting ready to goto Columbia, SC tomorrow to look around and all talk to you all again probally friday night/ sat morning
Life's hard, even harder if your stupid John Wayne
http://rtssite.shutterfly.com/
grayfox1119 wrote:JEFF: I take it those 2 new Decoders are for the "F" units? BTW, I don't know if you heard on your news yet about the big fire in Manchester, NH last night. It was a row complex of Condos, over 10 units destroyed. It was caused by one of the electric coffee makers, she left it plugged in, 1st floor. She smelt smoke from her Living room, went to the kitchen, saw the flames and ran out LEAVING THE *** DOOR OPEN !!!! There is no shortage of stupidity in this country!! Over 100 people without a home today because she left the door open and the fire got a good start with the air supply out the hallway from her apartment. Luckily no one was injured.As a point of safety to all my friends in the Diner:1. DO NOT leave toasters, coffee makers, and other small kitchen appliances plugged in!!!! They can fail even if turned OFF!!! Bet you didn't know that!! Coffee makers are notoriously bad, and have started many fires while NOT in use!!2. If you ever have a fire ( and I sincerely hope you never do ) shut the door/s when leaving. You want to cut-off the supply of air to the fire to keep it from spreading fast, and also to confine the smoke as much as possible.3. Keep type ABC fire extinguishers always handy in your home, placed where you can safely get to them ( not in a cabinet or wall close to a possible source of fire !! ) I have one in the bedroom, one in a hall closet, one in the family room, and two in the lower level of the house. I do not keep one in the kitchen because that is where a fire is most likey to occur, and also not near the wood stoves either.
JEFF: I take it those 2 new Decoders are for the "F" units? BTW, I don't know if you heard on your news yet about the big fire in Manchester, NH last night. It was a row complex of Condos, over 10 units destroyed. It was caused by one of the electric coffee makers, she left it plugged in, 1st floor. She smelt smoke from her Living room, went to the kitchen, saw the flames and ran out LEAVING THE *** DOOR OPEN !!!! There is no shortage of stupidity in this country!! Over 100 people without a home today because she left the door open and the fire got a good start with the air supply out the hallway from her apartment. Luckily no one was injured.
As a point of safety to all my friends in the Diner:
1. DO NOT leave toasters, coffee makers, and other small kitchen appliances plugged in!!!! They can fail even if turned OFF!!! Bet you didn't know that!! Coffee makers are notoriously bad, and have started many fires while NOT in use!!
2. If you ever have a fire ( and I sincerely hope you never do ) shut the door/s when leaving. You want to cut-off the supply of air to the fire to keep it from spreading fast, and also to confine the smoke as much as possible.
3. Keep type ABC fire extinguishers always handy in your home, placed where you can safely get to them ( not in a cabinet or wall close to a possible source of fire !! ) I have one in the bedroom, one in a hall closet, one in the family room, and two in the lower level of the house. I do not keep one in the kitchen because that is where a fire is most likey to occur, and also not near the wood stoves either.
Hello everybody .....
I was in Nashville a couple of days. Looks like everyone is busy. Good to se Luc stopped by.
I'll have a snack with nothing to drink.
GARRY
HEARTLAND DIVISION, CB&Q RR
EVERYWHERE LOST; WE HUSTLE OUR CABOOSE FOR YOU
Miss me? No? Well, fine. Then I'll jussaddle you with my Southern Indiana picutres. Any guess as to what rail lines I stalked?
http://picasaweb.google.com/jd5961 We still need to get up some from Today.
-Morgan
refill, thanks!
Took out the old Challenger and after about a minute it ran just fine. Am thinking IF I put this one up on the-bay along with the Bigboy, it could bring me the brunt of the needed for that new Athearn BB. Will probably suck it up and offer that one too.
Anyone have any knowledge of any manufacturer considering making a new Y6B Mallet anytime soon? I have an old Riv one I am also probably going to add to the sale list, but hesitate if I may never be able to replace it. (then again, it could really help me pay for that new BB)
OK, I admit it, I find myself obsessed with acquiring that BB-beast.
JPowell wrote: grayfox1119 wrote: J.P.& ED: The Red Sox played a great game last night, beat Oakland 2-1, DiceK was really ON, as he struck out 9. I saw the highlights on Sportscenter this morning. I hope Lester can redeem himself and get a win in this afternoon's game. Start time is in about 20 minutes.JP
grayfox1119 wrote: J.P.& ED: The Red Sox played a great game last night, beat Oakland 2-1, DiceK was really ON, as he struck out 9.
J.P.& ED: The Red Sox played a great game last night, beat Oakland 2-1, DiceK was really ON, as he struck out 9.
I saw the highlights on Sportscenter this morning. I hope Lester can redeem himself and get a win in this afternoon's game. Start time is in about 20 minutes.
JP
JP: Lester pitched a great game, a 2 hitter. Rumor has it that Ed got so excited after the game that Dice-K pitched last night, he party'd too much on Tequila and is not out on the front porcelin yet...LOL
LEE: That was great deal on EBay, 100 figures for $2!! Painting them should not be a big deal at all. I would have my grandkids paint them, they love it , and they take pride when they see the figures that "they" did on the layout!!
Later, guys,
Jeff, I just tossed 6 AT machines last Tuesday. People give them to me to do a secure format (aka a low level format) before the machine is scrapped and often I salvage all the still working parts and sell them to the computer repair shops. I'll let you know what I get in if it's any good.
Jim, I have to confess those people are un-painted but for 100 people for $2 you can't beat it.
I also put a bid on a used, but operating W-S-M lifting type car dumper, we shall see what happens.
LSWrr wrote:Jeff, if you want I can start saving AT PS for you. I do a lot of computer repair and I normally throw them out.
Jeff, if you want I can start saving AT PS for you. I do a lot of computer repair and I normally throw them out.
Afternoon, Diners! Zoe, my afternoon usual (RBF), in a cold frosty mug, please.
Thanks! Where's Sue? Better tell her the floats are getting ready, she'll be by for one in no time at all. Hey, Sue - I agree about that very nice shot of your #7 Shay in your signature.
Lee, that does sound like an excellent price on the figures, and even if you have to clean them up and repaint some (but hopefully you won't even need that). You got me thinking - is there anyone in the Diner who's tried some of the operating street lights (HO), and how do you like the ones you got? I'm mostly looking at steam/diesel transition era type lights. Some of the Walthers ones are definitely too modern for my use, but I wanted to know of other ones that look good and work well (Walthers, Busch, Brawa, or others?). And of course, the more affordable, the better!
Rob, I hope Puddles gets things passed soon and is feeling better. Almost as hard for you and the wife worrying about her as it is for Puddles, I'm sure. Hope you get a good price on your engines and rolling stock you will be selling.
Hey, Duke and PC, if down South needs more water, they should just hook up a pipe to the Mississippi around here! Some places south of Cape (Dutchtown, Whitewater and others) would dearly love to ship out some of their excess. They're still cleaning up, even some around here from a while back - have seen mattresses, box springs and other stuff in a big pile out next to the street (that apparently got soaked in someone's basement when the creek overflowed a couple of weeks ago). So if they want water, just hook up a pipe - of course, it might come with various assorted 'stuff' in it or floating on top of the water...
bjdukert wrote:Luc Good to see you in again,if only for a short visit.
Luc Good to see you in again,if only for a short visit.
, Luc! How're you and Gloria doing, or are you snowed in still up there?
I'll be w**king on my float for a bit. Since JP's treating, come join me and have one, Diners!
Blessings on your afternoon and evening,
Jim in Cape Girardeau (in Swampeast Missouri)
Dick They have been talking about that for a few years now but there has always been a block put in place and that is just fine by me. We need the Lakes and don't need the water going elsewhere and they have been down 2-3ft for about the last 3-4 years. You wouldn't think that it would make a difference but it does and Lee could probably tell you more about that. Hopefully with the snowfall we have had this year(in the top 20th since recording) it will bring them up some.
That's about it
Best to all on sick call and those recovering
Talk to you later
Duke
"Don't take a wooden nickel,because it isn't worth a dime" by my Dad
"There are only 3 things you need out of life:A gentle grade,the wind in your face,and cinders in your hair.....But keep an eye on the water glass!" Jack Evans
Cederstrand wrote: ***Philip, THANKS for the info. Mid-70's...then it's heading for the chopping block.
***Philip, THANKS for the info. Mid-70's...then it's heading for the chopping block.
No problem......
Hey, did they catch that crook yet?
I don't know, but the choppers are gone and so is the extremely obvious police presence.
Looks like this page is on me.
Oh, btw, before I forget, g/f and I are going for a short day trip Saturday towards Rochester NY. I'll take the camera incase I get an opportunity for some railfanning!
Enjoy!
//signed// John Powell President / CEO CNY Transportation Corp (fictional)
http://s155.photobucket.com/albums/s303/nuts4sports34/
Hunter - When we met in January of 2000, you were just a 6 week old pup who walked his way into this heart of mine as the only runt in the litter who would come over to me. And today, I sit here and tell you I am sorry we had to put you down. It was the best thing for you and also the right thing to do. May you now rest in peace and comfort. Love, Dad. 8 June 2010
I love you and miss you Mom. Say hi to everyone up there for me. Rest in peace and comfort. Love, John. 29 March 2017
***Philip, THANKS for the info. Mid-70's...then it's heading for the chopping block. Hey, did they catch that crook yet?