Trains.com

CLOSED////////The Coffee Pot is still on and over 3 years. Here we gather as friends with trains.

539803 views
15108 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, January 17, 2007 8:43 AM

Morning all,

Yes Buckeye!  I see them too.   Thought I'd come to the end of the page after the first post.

Chief....  That's the Chevy SSR you're refering to.  We had one in the shop last year.  The box dressup package in this truck was quite the joke and cost way over $400.  This option included 8 slats of 2" X 1/4" varathaned oak for lining the bed floor.  I think the same thing could have been replicated with house trim from Home Depot for $20-$30.

Bruce Webster

 

  • Member since
    October 2004
  • From: 15 mi east of Cleveland
  • 2,072 posts
Posted by 1688torpedo on Wednesday, January 17, 2007 9:04 AM
 Hello All!     Don B- Whew- That sounded like an Abbott & Costello Skit gone wild as far as the El Camino goes. Jim A may be right-You probably should have bought a Corvair! Wink [;)]Tongue [:P]Clown [:o)] Maybe Bruce Webster can sell you a Corvair that has been restored & at a reasonable price.Wink [;)]Wink [;)]Smile [:)] Roy- Have fun in New York. It may be warmer there than in Dallas after all!Wink [;)]Cowboy [C):-)] Jim A - Hope you find what you need at Dr.Tinker's. Take Care all.
Keith Woodworth........Seat Belts save lives,Please drive safely.
  • Member since
    December 2005
  • From: Sunny So. Cal.
  • 3,784 posts
Posted by dbaker48 on Wednesday, January 17, 2007 9:12 AM

Good Morning,

Chief I had looked at that SSR, and when I saw the price tag, Well that was that.  $50k, a bit too much.  Especially when I bought the El Camino it was only $13k.  I have put 276k miles on it, then it started the "Chevy blue puff" from the valve guides leaking oil.  Decided rather than just do a top end on the engine, to put a new crate engine in it.  Did that last year, and replaced the transmission.  So in a month or so, it will be like a new car and a lot less expensive.  Chris will probably end up with it, so he wanted stripes added to the front end.  So they are going to be putting 18" Camaro type strips on it.  Pearlized white with blue tint.  Should really look good.

Keith, remember that ebay auction you sent me, can you believe that set sold for $130?  Seems like a low price to me, but I'm not real sure.

 Trying to figure out what method of moujnting a ceiling rails in our train room with the aluminum sides.  Had considered using the plastic coating wire shelving, but not sure going to be happy with that long term.  Thinking more of putting up a ledger board than using wood shelf brackets, then a layer of plexiglass, and track on top.  Going to have 2 parallel ovals around the perimeter of the room.  Then using some dowels with possibly fishing line as a retaining wire.  Anyway a place to start.

Today, got to get car parts to the painter, then work.  How do you know when you can retire?Whistling [:-^]

 Keith, just saw your post.  The only problem is that the engine is in the wrong place on the
Corvair, I would get tired of all that backing up.  And not a lot of room for trips to the train shop.

Don

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, January 17, 2007 9:23 AM

 1688torpedo wrote:
 Hello All!     Don B- Whew- That sounded like an Abbott & Costello Skit gone wild as far as the El Camino goes. Jim A may be right-You probably should have bought a Corvair! Wink [;)]Tongue [:P]Clown [:o)] Maybe Bruce Webster can sell you a Corvair that has been restored & at a reasonable price.Wink [;)]Wink [;)]Smile [:)]

Think Rampside Pickup!  Tons more room than a El Camino and it'll easily get you out of any SoCal snowdrifts.  Just give yourself an extra hour to get where you're going....15 minutes extra travel time and 45 minutes to change a fanbelt.  And Kieth wonders why I don't drive down to Ohio in a Corvair Wink [;)]

Bruce Webster

  • Member since
    October 2004
  • From: 15 mi east of Cleveland
  • 2,072 posts
Posted by 1688torpedo on Wednesday, January 17, 2007 9:30 AM
 Don B- Wow!   $130.00 for that Train set? That is a low price & that train had all of it's boxes also. Two weeks ago I bid on some 1690 series Passenger Cars on ebay with boxes(although some of the flaps were torn off) Anyway, I started my bid at $125.00 & I bidded about four times & at the last minute someone bid $265.00 for all three passenger cars & won them. I could not believe it.Shock [:O]. Maybe Bruce can sell you a Corvair with a Engine in front & a Trunk in the rear & I have seen some Corvairs modified like that also.Smile [:)] Bruce- Out east of here in Concord Township there is someone who owns one of those Rampside Corvairs. Only one around that I know of. Don could use one to transport his trains around. Nice picture also.Wink [;)]Wink [;)]Smile [:)] Take Care.
Keith Woodworth........Seat Belts save lives,Please drive safely.
  • Member since
    December 2003
  • From: Central PA
  • 2,536 posts
Posted by jefelectric on Wednesday, January 17, 2007 9:31 AM
 dwiemer wrote:

Laz and John, thanks for the heads up.  Do you think they will go well with the Madisons?  I had been looking at steam, but this may be the way to go.  I only have one set of F units and those are the Lackawanna set.

Dennis

Dennis, The link I sent you is for E-8s, similar to the Fs except 6 wheel truck and other cosmetic changes.  Also a little longer I think.  They should work well with the Madison cars.

The only thing I know of in stream that is available new is the Williams J class.  Don't know if it is prototypical, or if you care, but it is a beautiful engine.  No DCS or TMCC but has smoke, whistle & bell.

http://www.williamstrains.com/HTML/TL_JClass.htm

John Fullerton Home of the BUBB&A  http://www.jeanandjohn.net/trains.html
  • Member since
    December 2003
  • From: Central PA
  • 2,536 posts
Posted by jefelectric on Wednesday, January 17, 2007 9:33 AM
 lionroar88 wrote:

 fifedog wrote:
88 - interesting twist on the G's.  But I think the classic grey/blue/black B&O scheme would look pretty good on a GG1.

Fife here are some images I mocked up:



I think there is some kind of law against painting GG-1s in those colors.  A little like painting the Broadway Limited in royal blue. Smile [:)]

John Fullerton Home of the BUBB&A  http://www.jeanandjohn.net/trains.html
  • Member since
    December 2005
  • From: Sunny So. Cal.
  • 3,784 posts
Posted by dbaker48 on Wednesday, January 17, 2007 9:34 AM
 brwebster wrote:

Wink [;)]

Bruce Webster

Bruce,  that is really a NICE looking Corvair, do you still have it?

Don

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, January 17, 2007 10:07 AM
 dbaker48 wrote:
 brwebster wrote:

Wink [;)]

Bruce Webster

Bruce,  that is really a NICE looking Corvair, do you still have it?

Hi Don,

 Yep!  Going on 13 years of ownership now.  This is actually the second time I've owned the car.  Originally I bought it off my buddy then sold it back to him.  When he decided to sell again I had first shot.  By that time he had installed a modified turbocharged engine, lowered it, new 4spd tranny with 308 diff and A/C so I couldn't resist.  I've tricked it out a bit to my liking with a Blaupunkt system, leather BMW 7 series seats, 14" old school mags and bolted on a gaggle of factory accessories so it's really a comfy road machine.  Speedo was zeroed when I first bought it and it just turned over 30K miles last year.  I have yet to have any major problems with it other than I did change a fanbelt 2 years ago.  The car is really in it's eliment when doing 60-80mph and you punch it.

BTW, I have 2 others...both totally stock.  One of them came from the original owner in Whittier, Ca.

Bruce Webster

  • Member since
    October 2004
  • From: 15 mi east of Cleveland
  • 2,072 posts
Posted by 1688torpedo on Wednesday, January 17, 2007 10:12 AM
 Bruce- Now you've done it!   Looks like Don is very interested in your Corvair!Wink [;)]Tongue [:P] Going once,Going twice, sold to Don Baker of Cerros,California!Wink [;)]Tongue [:P]Clown [:o)] Nice Car Bruce. Take Care.
Keith Woodworth........Seat Belts save lives,Please drive safely.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, January 17, 2007 10:13 AM
 jefelectric wrote:
 lionroar88 wrote:

 fifedog wrote:
88 - interesting twist on the G's.  But I think the classic grey/blue/black B&O scheme would look pretty good on a GG1.

Fife here are some images I mocked up:



I think there is some kind of law against painting GG-1s in those colors.  A little like painting the Broadway Limited in royal blue. Smile [:)]



John,
Yeah I know!  I really like the GG-1s, one of my favorite engines of all time, but the wife wants only B&O and C&O on the big layout, and since she is funding part of this I want to keep her happy... when I showed her an ebay auction on a GG-1 restore that wasn't complete and then showed her my designs, she was intrigued... told me I still had to wait till after the house is built.

I may just go with an inexpensive Williams GG-1 and repaint it... I've been trying to contact them to see if they will sell me two undecorated units...
  • Member since
    January 2005
  • From: New England
  • 6,241 posts
Posted by Jumijo on Wednesday, January 17, 2007 10:22 AM

Not a heck of a lot going on here. I'm on lunch and it's way too cold to go for a walk.

I set up a loop of FasTrack on the carpet in our train room the other night. I ran one of my post war locos on it and thought it sounded ok. Then I put the loco on the layout and man, what a difference! Easily twice as loud on the table. So this has convinced me that the Chief had the right idea all along. Run the trains on the carpet. It's already been decided, the Jumijo layout will be dismantled this weekend.

Lionroar88 - Williams is NOT going to sell you a GG1 with an undecorated shell. Not gonna happen. 

Jim 

Modeling the Baltimore waterfront in HO scale

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, January 17, 2007 10:39 AM

 1688torpedo wrote:
 Bruce- Now you've done it!   Looks like Don is very interested in your Corvair!Wink [;)]Tongue [:P] Going once,Going twice, sold to Don Baker of Cerros,California!Wink [;)]Tongue [:P]Clown [:o)] Nice Car Bruce. Take Care.

Thanks Kieth,

I have connections in California ( my folks winter in Santa Ana, not far from Don) and since we're in the old car business it's a totally doable thing.  Problem is, what kind of a friend would I be if I sold you a Corvair? Wink [;)]

Bruce Webster

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, January 17, 2007 10:50 AM
 jaabat wrote:

Lionroar88 - Williams is NOT going to sell you a GG1 with an undecorated shell. Not gonna happen. 

Jim 



Jim,
I figured it was a LLLLOOOONNNNGGGG shot, but one I was willing to take!  The Williams engines are quite inexpensive so that is why I'm leaning that dirrection and just stripping the shell and repainting it.

Brent
  • Member since
    July 2003
  • From: Watkinsville, GA
  • 2,214 posts
Posted by Roger Bielen on Wednesday, January 17, 2007 11:06 AM

Well its official.  I am now employeed at a train store.  I stopped by Memory Station this morning and Lewis and I came to an agreement, I start next Wed. morning when he's back in town.

Chilly and windy here this morning but the sun is bright.  Bad weather is scheduled to move in tonight.  Spent a couple hours taking down another section or fence this morning.  Now I'm off to my workbench to continue with the mods. to the second Mikado for the client.  This one need a Worthington water heater made, doing it in brass, a repaint, and SAL decals.

I've taken photos before and after, engine 1, and will take engine 2 and try to post when completed.

Roger B.
  • Member since
    October 2004
  • From: Millersburg, Pa.
  • 7,607 posts
Posted by laz 57 on Wednesday, January 17, 2007 11:15 AM
 Roger Bielen wrote:

Well its official.  I am now employeed at a train store.  I stopped by Memory Station this morning and Lewis and I came to an agreement, I start next Wed. morning when he's back in town.

Chilly and windy here this morning but the sun is bright.  Bad weather is scheduled to move in tonight.  Spent a couple hours taking down another section or fence this morning.  Now I'm off to my workbench to continue with the mods. to the second Mikado for the client.  This one need a Worthington water heater made, doing it in brass, a repaint, and SAL decals.

I've taken photos before and after, engine 1, and will take engine 2 and try to post when completed.

ROGER,

   How bout a discount for DA GIZ here on the forum?

laz57

  There's a race of men that don't fit in, A race that can't stay still; Robert Service. TCA 03-55991
  • Member since
    March 2005
  • From: Southwest Georgia
  • 5,028 posts
Posted by dwiemer on Wednesday, January 17, 2007 11:32 AM

Congratulations Roger, I have yet to make the trip up that way, but will soon and I will see if you are going to be there.

Chief, ya hurt me big guyBlack Eye [B)]  I don't have trains running on the layout upstairs, but do on the main floor.  I know it is not the same thing, and you have much more time of being a floor runner than I, so you have beaten me.  On the other hand, I have been hearing about your plan to build a layout for several years now, so I am glad it has not taken me that long to get to this point.Wink [;)]  I look forward to seeing more progress on your and my layouts.

Dennis

TCA#09-63805

 

Charter BTTs.jpg

  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Wednesday, January 17, 2007 11:41 AM
Speaking of cars, this is a favorite place to visit them. They also sell 'em - no Corvairs today. http://www.volocars.com/index.html

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

  • Member since
    January 2005
  • From: New England
  • 6,241 posts
Posted by Jumijo on Wednesday, January 17, 2007 11:57 AM

 cnw1995 wrote:
Speaking of cars, this is a favorite place to visit them. They also sell 'em - no Corvairs today. http://www.volocars.com/index.html

Doug,

I restored a 1972 Olds 442 convertible and then sold it to a collector right before I got married. The last I saw of it, it was at the Volo museum. They were selling it for a lot more than I sold it for!

Jim 

Modeling the Baltimore waterfront in HO scale

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, January 17, 2007 12:36 PM
 jaabat wrote:

 cnw1995 wrote:
Speaking of cars, this is a favorite place to visit them. They also sell 'em - no Corvairs today. http://www.volocars.com/index.html

Doug,

I restored a 1972 Olds 442 convertible and then sold it to a collector right before I got married. The last I saw of it, it was at the Volo museum. They were selling it for a lot more than I sold it for!

Jim & Doug,

Way to make me feel old guys!  When I first got involved with the old car hobby you couldn't turn a page without reading about the Volo Museum.  At that time Jim's 442 was probably rolling off the assembly line.

Bruce Webster

  • Member since
    January 2005
  • From: New England
  • 6,241 posts
Posted by Jumijo on Wednesday, January 17, 2007 12:55 PM

My buddy and I disassembled the 455 motor in that 442 one day. He threw every single bolt in a 5 gallon plastic pale. I could have choked him. It took me a solid week to figure out where each one went! I miss those days!!

Jim 

Modeling the Baltimore waterfront in HO scale

  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Wednesday, January 17, 2007 12:56 PM
 jaabat wrote:
 Buckeye Riveter wrote:

Are you guys seeing ads between the first and second post on each page of a topic this morning?Question [?]

 

Yes. But for a few weeks now, I've been seeing a space between the first and second posts. Then the rest are all stacked on top of each other.

Jim 

Today is the first day I am seeing it with the space and ads. 

Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Wednesday, January 17, 2007 1:01 PM
Me too, Buckeye. It sure is neat to go to Volo and wander through the museum - I went last summer - it used to be in the middle of nowhere - but it's surrounded by suburbs now.  They have some concept cars and hot rods - a Batmobile. Lots of military stuff too, and a few related rooms of antiques and collectibles. But then to wander the display area - and say to oneself - hmmm, that's not a bad price for a '57. The only thing keeping me from driving out with something 'new' is thinking where am I going to fit the kids in this two-seater.

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

  • Member since
    January 2005
  • From: New England
  • 6,241 posts
Posted by Jumijo on Wednesday, January 17, 2007 2:03 PM
 Buckeye Riveter wrote:
 jaabat wrote:
 Buckeye Riveter wrote:

Are you guys seeing ads between the first and second post on each page of a topic this morning?Question [?]

 

Yes. But for a few weeks now, I've been seeing a space between the first and second posts. Then the rest are all stacked on top of each other.

Jim 

Today is the first day I am seeing it with the space and ads. 

Do they bother you guys? They don't really bother me. I almost don't even see them. Aside from the ad at the very top of the page, they are the only ads I see. The old software used to have ads all down the right side of the page.

Modeling the Baltimore waterfront in HO scale

  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Wednesday, January 17, 2007 2:59 PM
 jaabat wrote:
 Buckeye Riveter wrote:
 jaabat wrote:
 Buckeye Riveter wrote:

Are you guys seeing ads between the first and second post on each page of a topic this morning?Question [?]

 

Yes. But for a few weeks now, I've been seeing a space between the first and second posts. Then the rest are all stacked on top of each other.

Jim 

Today is the first day I am seeing it with the space and ads. 

Do they bother you guys? They don't really bother me. I almost don't even see them. Aside from the ad at the very top of the page, they are the only ads I see. The old software used to have ads all down the right side of the page.

Naw, it doesn't bother me, but I was wondering if it was sort of a test such that ads could be put between every posting because we don't have the ads down the right side of the page anymore.

Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    July 2006
  • From: Hightstown, NJ
  • 2,886 posts
Posted by anjdevil2 on Wednesday, January 17, 2007 3:59 PM

Geeez, so much to catch up on!!

Sorry I'm late....Had too many projects to complete before lift off on Friday.

All this talk about Chevys....making me itch....I have a '70 RoadRunner Convertible in NJ, and since this a TRAIN forum, I'll leave it at that!Big Smile [:D]

Cold (relatively speaking) and raining today about 55ish a very raw day to be sure.Sad [:(]

I saw those ads also, first time I thought that was just a single post and didn't look for more!! Just saw it after the first post, not the sides of the forum screen.  I saw a N&W steamer & tender in my LHS (lionel) brand new in the box for $125 (down from 300 something).  Tomorrow, I'll try to get there to get a part number on it.  I'm pretty sure that it just has a whistle, not rail/trainsounds or TMCC.  I'll see what I can come up with. 

Work calls again...be well all

 

 

 

I am the monster in your head...And I thought you'd learn by now, It seems you haven't yet.
I am the venom in your skin  --- Breaking Benjamin


  • Member since
    December 2004
  • 3,176 posts
Posted by csxt30 on Wednesday, January 17, 2007 5:08 PM

Good Evening Everyone !!  Awful soggy around here yet & so is my basement. Though it's slowed up a bit down here .

Congratulations to Roger !!  I think I've seen their adds before & I think Roger is really going to enjoy working there !! Smile [:)]

They just said on the news that today is the day most people toss out their New Years resolutions !! I forgot to make any !! Laugh [(-D]

I wonder if we would be able to buy the new MTH wireless tethers they came out with. Pretty neat I think !! 

Well hope everyone has a nice evening !!

Thanks, John  

 

  • Member since
    December 2004
  • From: St. Louis, MO
  • 4,913 posts
Posted by Brutus on Wednesday, January 17, 2007 7:41 PM

I see the ads - I think I noticed them last night.

Roger - congratulations!  Sounds like a kid in a candy shop!Shock [:O]  Be careful or you'll spend more than you make there and end up working for the company store!

Nothing much here - people keep ROBBING me on ebay - but if they want to pay more than me, not much I can do about it.  Was looking at this magazine I picked up and saw a couple places had the MTH 787 reproduction on a great sale - of course, they're all sold out already!

RIP Chewy - best dog I ever had.

  • Member since
    October 2004
  • From: S.E. Ohio
  • 5,434 posts
Posted by Blueberryhill RR on Wednesday, January 17, 2007 7:44 PM

Question of the day..........

Where is Buckeye ????

Chuck # 3 I found my thrill on Blueberryhill !!
  • Member since
    November 2015
  • 3,584 posts
Posted by Sturgeon-Phish on Wednesday, January 17, 2007 7:53 PM

Evening all

Busy day.  Final coats of poly on the bookcase.  Making some trees for the layout, and cleaned up my car after loaning it to my daughter.  Now a little study after surfing.  Spose to get cold again.  

All have a good night

Jim 

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month