Today, I watched a Union Pacific "Z" train run through the red light and then go into emergency, stopping with the last two cars blocking both BNSF tracks at the diamond.
After being stopped for a few minutes, the train cleared the diamond and continued on its way.
Did anyone else see this event?
What was it that I was watching?
Did I really see what I thought I saw, i.e., a train running through a red signal light?
The new westward signals at the diamond have only one light. What you see is what you've got for Track 2 westbound. (The eastward signals have two heads, as they serve as the approach signal for the control point at Dement. I'm quite surprised at the lack of any more signal heads on the westbound signals, as there should be switches into Global 3 off Track 2 somewhere.)If there were some sort of infraction, it's virtually impossible to cover up.
Carl
Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)
CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)
Thank you for your responses clarifying what it was I thought I was looking at.
A map of Rochelle plainly shows the Union Pacific yards or sidings, so obviously, that was merely a routine train stop, and not an emergency.
I did notice that when the train started moving again, the FRED was brightly flashing, which I haven't yet seen on any other train passing through the diamond.
Is there a difference in how the FRED functions on different trains?
If the train truly went into emergency, it likely would have been there longer than a few minutes as the train has to be inspected.
All the images I can find of the westward signal show two heads, so an upper signal may well have been displaying a less restrictive aspect.
I don't know as the DS can talk a train through those signals.
Larry Resident Microferroequinologist (at least at my house) Everyone goes home; Safety begins with you My Opinion. Standard Disclaimers Apply. No Expiration Date Come ride the rails with me! There's one thing about humility - the moment you think you've got it, you've lost it...
The Rochelle view may not show the entire signal -- something I would hope Trains remedies (hint, hint). It is possible that there is an upper signal, which currently is out of the frame, and it was indicating "proceed".
The turnout to UP's Global III is a few hundred yards to the west of the crossing. Trains entering that yard frequently pause with a portion of the cars still blocking the crossing. I assume the reason for the pause is that a switch within the yard needs to be thrown before the train can proceed.
Yes, indeed! Thanks for the clean view.
trainmaster247 mloik We need a squeegee assist. Not surprising we had some quite heavy rains last night
mloik We need a squeegee assist.
We need a squeegee assist.
Not surprising we had some quite heavy rains last night
ChuckAllen, TX
Just logged in. Lens completely occluded by water, 11:47 AM Eastern. :-(
/Mr Lynn
Looks clear to me here on Monday morning.
Brian Schmidt, Editor, Classic Trains magazine
Looks like we need another Spider Web Removal Action. The angle of the sun right now (1549) and the web makes it really hard to see anything to the left.
Just saw a single unit EB on UP #2 trailing 198± cars moving right along at about 40 mph. Not bad for one unit! Of course, the two units 79 cars back might have been helping some.
cefinkjr BaltACD Not all coals are the same. ⁞ The rotation is specified in car loads. Each named fruit is a different grade of coal. Each different transshipper had their own naming system for the grades of coal that they handled. It was normal for transshippers to reconsign and divert (in place) excess cars of complementary grades when the loading of a vessel was completed so as to minimize demurrage charges for excess loading. Very interesting. Would you happen to know who was specified on the waybills as the consignee? I'd be interested to know specific consignees if you know any but generic information will do.
BaltACD Not all coals are the same. ⁞ The rotation is specified in car loads. Each named fruit is a different grade of coal. Each different transshipper had their own naming system for the grades of coal that they handled. It was normal for transshippers to reconsign and divert (in place) excess cars of complementary grades when the loading of a vessel was completed so as to minimize demurrage charges for excess loading.
Not all coals are the same.
⁞
The rotation is specified in car loads. Each named fruit is a different grade of coal. Each different transshipper had their own naming system for the grades of coal that they handled. It was normal for transshippers to reconsign and divert (in place) excess cars of complementary grades when the loading of a vessel was completed so as to minimize demurrage charges for excess loading.
Very interesting. Would you happen to know who was specified on the waybills as the consignee? I'd be interested to know specific consignees if you know any but generic information will do.
Consignees were the transshipers. Island Creek Coal and Consol Energy are two that I can recall - there were others. The transshippers were subsideraries of the major coal producers. There was no direct identification to the railroad of who the ultimate user of the shipments would be on the other side of the pond.
Once I got involved in the operation of the C&O Coal Pier at Newport News I found out on the larger ships, they would load 50-60K tons at Curtis Bay the steam down the Chesapeake Bay to load another 80-100K tons before departing for foreign ports. Baltimore Harbor maintained 39 foot dredged depth in the channels, Newport News had 55 foot deep channels. Baltimore was a little closer to the mine and had a rate benefit vs. Newport News, thus the transshippers saving nickles and dimes on the Baltimore loading and then filling the vessel out to it's ocean going maximum.
Never too old to have a happy childhood!
B&O's coal pier at Curtis Bay blended coal when it was loaded into vessels. Depending upon which mines the coal originated from the coal was assigned a Name for each grade. Each grade had specific metalurgical properties concerning the minerals that were in the spcific grade. Upon arrival at Curtis Bay 'Coal Surveyors' took samples from the arriving grades and tested them to insure that the grade contracted for was actually being delivered.
When it came time to load the vessels, a loading rotation for the particular vessel was created by buyer of the coal to create the intended overall makeup of the cargo. The loading rotation might read like -
1 Cherry2 Blueberry1 Banana2 Apple Repeat until hold is full - It was expected that the 'ocean motion' as the vessel traveled to it's overseas destination would full 'homoginize' the contents of the holds. (note - holds would be loaded in rotation with partial contents to evenly load the vessel and not have it break in two while being loaded)
There was (Is ?) an aluminum company in Canada who ordered anthracite from mines on the RBMN. They would order 2 cars from this mine, 5 cars from this other mine, 4 cars from a third mine, etc. in order to get the exact properties they wanted out of the mix.
dehusman Some of the RBMN coal was going to Idaho to a company making titanium dioxide. Something really black being used to make something really white.
Some of the RBMN coal was going to Idaho to a company making titanium dioxide. Something really black being used to make something really white.
Strange as that sounds it would explain a relatively small amount of coal moving in an unusual direction. That company in Idaho no doubt had a requirement for coal with some special property and it could only be secured from a limited number of sources.
I was raised in "Coal Country" and was taught very early that, besides the commonly known classifications of anthracite, bituminous, and lignite, coal varies widely within those classifications. Bituminous can be divided for example as metallurgical (good for smelting) and 'steam' coal (good for feeding boilers). The steam boats Dad worked on hauled some of the best metallurgical coal in the world (from the Pittsburgh Seam) but were fired with cheaper steam coal from other mines. Going down the scale of hardness, some folks even object to lignite being considered coal; they'll call it brown coal, just a step above peat. Old railroaders called it 'mud'.
Dave H. Painted side goes up. My website : wnbranch.com
Those RBMN cars are usually in MPRCB. I think they go to Norfolk NE.
For awhile about 15 +/- years back, we had a westbound coal move. It came off the NS and was all NS cars. I think they were going to a steel mill out west, but it's too far back for me to remember clearly.
Jeff
Eight full gons, Carl.
Brian (IA) http://blhanel.rrpicturearchives.net.
How small an amount of coal? I know that anthracite is shipped west through there in the middle of manifest trains, shipped in RBMN hoppers.
cefinkjr WB coal at Rochelle, IL? And in a relatively small amount. That is a puzzler. Might it have been some other substance? It might also have been anthracite for some special purpose. I was surprised recently to learn that anthracite is still being mined. But there is very little anywhere in the country outside northeastern Pennsylvania.
WB coal at Rochelle, IL? And in a relatively small amount. That is a puzzler. Might it have been some other substance?
It might also have been anthracite for some special purpose. I was surprised recently to learn that anthracite is still being mined. But there is very little anywhere in the country outside northeastern Pennsylvania.
I watch the UP baily yard cam, and straight north from where the cam is mounted, is an area where maintenance is done on cars, for a week or so there were a number of gondolas filled with coal. Looking at the cam right now, they are gone. Observed last week where the crews with one gondola lifted using a crane, think they were replacing bogies. I also watched crews take apart a locomotive, had the cab on the ground a few days then it was gone.
Just watched a WB UP mixed manifest go through- did a double-take towards the tail end of the train, which appeared to have eight loaded coal cars as a group in the mix. Pretty long train with only two units pulling, too...
Given the reported air temperature (32°), those rain drops might be frozen on the glass of the lens. They're still there two hours later.
Rain on the glass this afternoon created some interesting effects with the light from an Eastbound UP stack train's ditch lights and headlight as it slowly traversed the diamonds.
GREG HODGES... UP westbounds especially seem to slow down just before hitting the diamonds and kind of gingerly ease their way across them.
Slow orders move traffic a whole lot faster than cleaning up derailments; clean up efforts tend to slow things down ... a lot.
Yes, quite a bit of activity this morning. I noticed that over the last couple of days UP westbounds especially seem to slow down just before hitting the diamonds and kind of gingerly ease their way across them.
Our community is FREE to join. To participate you must either login or register for an account.