Trains.com

Semi-official Rochelle webcam discussion thread

373239 views
3712 replies
1 rating 2 rating 3 rating 4 rating 5 rating
Moderator
  • Member since
    January 2011
  • From: Wisconsin
  • 1,532 posts
Posted by Brian Schmidt on Monday, February 22, 2016 10:34 AM

Our webcam provider EarthCam is having technical issues. There is no estimate for a return to service at this time.

Brian Schmidt, Editor, Classic Trains magazine

  • Member since
    January 2002
  • From: Canterlot
  • 9,575 posts
Posted by zugmann on Monday, February 22, 2016 11:30 AM

Electroliner 1935

 

 

I don't get your comment. Please explain. Points toward what?

 

Being able to hit the camera from that distance... has to be worth something.  At least bragging rights.

It's been fun.  But it isn't much fun anymore.   Signing off for now. 


  

The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any

  • Member since
    September 2014
  • From: Muskogee Oklahoma
  • 185 posts
Posted by MKT Dave on Monday, February 22, 2016 12:02 PM

anyone know travel time for trains from Baily Yard to Rochelle?

...
  • Member since
    December 2001
  • From: Sunny (mostly) San Diego
  • 1,920 posts
Posted by ChuckCobleigh on Monday, February 22, 2016 12:57 PM

Brian Schmidt

Our webcam provider EarthCam is having technical issues. There is no estimate for a return to service at this time.

Magic!  The feed seems to have returned at 12:57 CST.  Appropriately enough, crews are tending to the diamonds.

  • Member since
    September 2014
  • From: Muskogee Oklahoma
  • 185 posts
Posted by MKT Dave on Tuesday, February 23, 2016 9:06 AM

it was too quick to get a picture, monster hand wipes the lens with cloth... at 0906am

...
Moderator
  • Member since
    January 2011
  • From: Wisconsin
  • 1,532 posts
Posted by Brian Schmidt on Tuesday, February 23, 2016 9:12 AM

I saw a wiper blade, not a hand and a cloth.

Brian Schmidt, Editor, Classic Trains magazine

  • Member since
    September 2014
  • From: Muskogee Oklahoma
  • 185 posts
Posted by MKT Dave on Tuesday, February 23, 2016 10:51 AM

I didn't get a good look, just saw the dark flash as i just logged in. So your probably right.

...
  • Member since
    September 2007
  • 192 posts
Posted by MrLynn on Tuesday, February 23, 2016 11:21 AM

Just saw a single WP locomotive leading an eastbound double-stack intermodal on the UP--a heritage unit?

/Mr Lynn

  • Member since
    April 2002
  • From: Dartford, Kent, England
  • 84 posts
Posted by jdobo on Tuesday, February 23, 2016 12:10 PM

MrLynn

Just saw a single WP locomotive leading an eastbound double-stack intermodal on the UP--a heritage unit?

/Mr Lynn

 I saw it too it was a Union Pacific SD70ACE, the WP heritage unit #1983.
Regards Jon.

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Tuesday, February 23, 2016 12:37 PM

Looks as if the wall parralel to the UP main of the old DelMonte building has been removed  

Never too old to have a happy childhood!

              

  • Member since
    October 2014
  • 1,644 posts
Posted by Wizlish on Tuesday, February 23, 2016 12:43 PM

BaltACD
Looks as if the wall parallel to the UP main of the old DelMonte building has been removed

Videos all over the Internet - google 'Rochelle Del Monte demolition' for everything you need at your fingertips in seconds.

  • Member since
    September 2004
  • From: northern il.
  • 142 posts
Posted by rdettmer on Tuesday, February 23, 2016 1:07 PM

i googled it didn't get anything

  • Member since
    October 2014
  • 1,644 posts
Posted by Wizlish on Tuesday, February 23, 2016 1:53 PM

rdettmer
i googled it didn't get anything

Your Google and mine must be different.  See if this works; I don't know if these Google direct links will be clickable:

https://www.google.com/search?q=rochelle+del+monte+demolition&ie=utf-8&oe=utf-8

The first link has a video of an excavator working on the inside of the building, and appears to be dated in mid-December 2015.  The direct link to that reference is:

https://www.facebook.com/RochelleFlaggTownshipMuseum/videos/646569472149051/

I am not on Facebook, and probably never will be, but I get the video perfectly, and on a public connection, too.  (There appears to be other discussion on this museum's Facebook page...)

  • Member since
    May 2013
  • 3,231 posts
Posted by NorthWest on Tuesday, February 23, 2016 5:02 PM

Picture taken from inside the building:

http://www.railpictures.net/viewphoto.php?id=566907&nseq=4

  • Member since
    September 2007
  • 192 posts
Posted by MrLynn on Tuesday, February 23, 2016 7:55 PM

NorthWest

Picture taken from inside the building:

http://www.railpictures.net/viewphoto.php?id=566907&nseq=4

Cool photo. The detail is startling after viewing the low resolution of the webcam.

FWIW, EMDs seem to be poorly represented on the BNSF trains that I've seen on the cam, compared to the GEs (like the one behind 9063 in the photo).

/Mr Lynn

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Tuesday, February 23, 2016 9:48 PM

Wizlish

 

 
BaltACD
Looks as if the wall parallel to the UP main of the old DelMonte building has been removed 

Videos all over the Internet - google 'Rochelle Del Monte demolition' for everything you need at your fingertips in seconds.

Aware of that - just that 20 or 30 feet of the UP side wall had been standing there for several weeks and I anticipated that they would be dismantling the BNSF side wall down to the corner so the the corner could provide a level of support for each side.

Never too old to have a happy childhood!

              

  • Member since
    December 2001
  • From: Northern New York
  • 25,020 posts
Posted by tree68 on Wednesday, February 24, 2016 7:02 AM

A lot of folks comment about the poor resolution of the webcam.  Compared to its predecessor, it is fantastic.  And compared to other rail cams, it's probably on a par.

It's as good, or better, than most traffic cams.

I'm not complaining. 

LarryWhistling
Resident Microferroequinologist (at least at my house) 
Everyone goes home; Safety begins with you
My Opinion. Standard Disclaimers Apply. No Expiration Date
Come ride the rails with me!
There's one thing about humility - the moment you think you've got it, you've lost it...

  • Member since
    September 2007
  • 192 posts
Posted by MrLynn on Wednesday, February 24, 2016 7:06 AM

tree68

A lot of folks comment about the poor resolution of the webcam.  Compared to its predecessor, it is fantastic.  And compared to other rail cams, it's probably on a par.

It's as good, or better, than most traffic cams.

I'm not complaining. 

I wasn't complaining.  Just noting how neat it was to see some real detail.

I agree that the current cam is far better than the previous one—and the sound is great, too!

/Mr Lynn

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Wednesday, February 24, 2016 12:53 PM

I think the picture would be a little clearer if some brave soul would climb up with a bit of Windex and clean off a layer of grime.

I'm not endorsing that action for today, though.  There's no snow visible in the area, but the wind is kicking up something fierce.

That interior shot of the Del Monte building makes it look like the vehicle entrance used to be large enough to accommodate feight cars.

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    September 2007
  • 192 posts
Posted by MrLynn on Wednesday, February 24, 2016 1:59 PM

CShaveRR

I think the picture would be a little clearer if some brave soul would climb up with a bit of Windex and clean off a layer of grime.

Yes, there is a substantial smudge in the center of the screen. Yesterday I wondered if it were smoke from a fire in the pit, but it's still there today.

/Mr Lynn

  • Member since
    June 2001
  • From: US
  • 13,488 posts
Posted by Mookie on Sunday, February 28, 2016 3:06 PM

All clean and nice looking BNSF tofc going by (I got there late) Plus someone sitting on a bench down below.  

Check again.  Maybe you sneezed on your monitor?  Shy

She who has no signature! cinscocom-tmw

  • Member since
    April 2007
  • From: Clearlake, California. USA
  • 869 posts
Posted by Lake on Sunday, February 28, 2016 3:39 PM

junior yardmaster

The center of the Rochelle webcam needs to be cleaned; it's not easy to see through.

 

I see it also. Looks like a cloud of smoke, except it stays the same shape.

Ken G Price   My N-Scale Layout

Digitrax Super Empire Builder Radio System. South Valley Texas Railroad. SVTRR

N-Scale out west. 1996-1998 or so! UP, SP, Missouri Pacific, C&NW.

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Sunday, February 28, 2016 9:36 PM

This was explained on the thread for the Rochelle webcam.  Yes, it does need a cleaning--apparently a nice BNSF GE unit targeted the lens with a glop of semi-solid exhaust particulate (someone saw it happen).  It would involve climbing up there (not easy under the best of conditions--and it's been windy, if not otherwise nasty, over the week since it happened).

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    December 2001
  • From: Northern New York
  • 25,020 posts
Posted by tree68 on Monday, February 29, 2016 7:04 AM

CShaveRR
...a glop of semi-solid exhaust particulate...

ALCO snot lives!

LarryWhistling
Resident Microferroequinologist (at least at my house) 
Everyone goes home; Safety begins with you
My Opinion. Standard Disclaimers Apply. No Expiration Date
Come ride the rails with me!
There's one thing about humility - the moment you think you've got it, you've lost it...

  • Member since
    January 2015
  • 47 posts
Dirty webcam lens
Posted by junior yardmaster on Monday, February 29, 2016 7:04 AM

The center of the Rochelle webcam needs to be cleaned; it's not easy to see through.

  • Member since
    July 2008
  • 2,325 posts
Posted by rdamon on Tuesday, March 1, 2016 2:31 PM
Is that a new port-a-potty behind the UP signal box on the far right side?
  • Member since
    December 2001
  • From: Northern New York
  • 25,020 posts
Posted by tree68 on Tuesday, March 1, 2016 2:58 PM

rdamon
Is that a new port-a-potty behind the UP signal box on the far right side?

Looks like it...

LarryWhistling
Resident Microferroequinologist (at least at my house) 
Everyone goes home; Safety begins with you
My Opinion. Standard Disclaimers Apply. No Expiration Date
Come ride the rails with me!
There's one thing about humility - the moment you think you've got it, you've lost it...

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Tuesday, March 1, 2016 4:36 PM

Snow dusted & threatening clouds

Never too old to have a happy childhood!

              

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Tuesday, March 1, 2016 4:37 PM

Could that be an indication that some serious signal work is about to begin here, that would take a lot of people being here for a while...somehing like a cutover of the new signals?

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    September 2007
  • 192 posts
Posted by MrLynn on Thursday, March 3, 2016 12:43 PM

Just logged on, and what do I see but a man in dark clothes and a bag racing across both sets of tracks, then disappearing off to the left.  A burglar?

Wait—now here's the local with a couple of center-beam flatcars; stopped at the switch, now heading up the siding.  Could that fellow have had something to do with that?

Interestingly, an easbound UP intermodal stopped at the signals before the diamonds, waited until the local went up the siding and just started across.  Must have gotten a stop signal until the switch was thrown.

Moderators: There's still a smudge just left of center in the cam.

/Mr Lynn

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy