Trains.com

JUNE Coffee Pot, 15 years [April 1] and still going. Oatmeal for all those above the Mason-Dixon, grits for those below. Locked

8629 views
217 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2009
  • 1,986 posts
Posted by 8ntruck on Friday, June 21, 2019 5:01 PM

Don - that is a good story.

Spent the day at another cardiac cath lab today.  They went in through the arm and checked pressure drop across the blockages.  Doc said that the pressure drop was not enough to require installing stints.  I'm on a new medication stack and in fly and watch mode now.  The heart monitor I've been carrying around since Wednesday is showing that there have been no abnormal events.  Going to be reviewing my diet and exercise program as well. 

Two more follow up apointments next week.  I'm going to be asking if there might have been some other cause for last Friday's event that started all of this and maybe we stumbled onto the blocked artires by luck.  After those appointments, then we can get on with our summer plans after a two week delay. 

About all for now.

KRM
  • Member since
    January 2011
  • From: North Bluff above Marseilles IL
  • 6,506 posts
Posted by KRM on Friday, June 21, 2019 9:19 PM

Sounds good so far 8N, best of luck with all that!

If you guys want to see some more of the Tier 4 set check out this forum post.

Lionel BNSF ET44C Tier 4 diesel locomotive out of the box. Day 2

Joined 1-21-2011    TCA 13-68614

Kev, From The North Bluff Above Marseilles IL. Whistling

 

  • Member since
    April 2005
  • From: South Carolina
  • 9,713 posts
Posted by rtraincollector on Saturday, June 22, 2019 8:17 AM

8ntruck Hang in there guy. I went thru a heart cath and the decision was to give me a defibrillator'pacemaker ended up with a set of leads they realized later that were fine but part of a recall, about 8 years they had to replace my defirillator and after that about 3 months later the leads went bad, then some how I endeed up with staph infection on my heart. And had to do open heart surgery to replace a valve because of that. What I'm getting at, is I'm still here and doing fine three years after the last operation. It will get better. 

Life's hard, even harder if your stupid  John Wayne

http://rtssite.shutterfly.com/

  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Saturday, June 22, 2019 8:23 AM

Morning all!

Happy Summer? Cloudy and rain for most of the day. SJ - it's only 9:20am and its already dark...as MikeC would say - ugh ugh ugh....Lightning

8n - prayers continue, glad you have a plan Angel

Regards, Roy

  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Saturday, June 22, 2019 11:04 AM

Haircut day.  The back injections went well.  Resting up.

8N, go get the bypasses.  Surprise  Then no more worries.  No joke.  Take the meds to keep them open. 

Have a good one.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    January 2009
  • 1,986 posts
Posted by 8ntruck on Saturday, June 22, 2019 11:27 AM

Kev - enjoyed your video.  You will have to take another when you have added the weight - maybe with another 5 cars added to the length of the train?

My wife and I were discussing yesterday's proceedure over breakfast.  She made the observation that I was the only one to walk out of the cath lab while we were there.  Everybody else went out on a gurney to be admitted into the hospital for recovery.  Also, reading about your experiences has made me realize that by worrying, I'm probably my own worst enemy.  Got to let it go and get on with life. 

Thanks for the support, guys.  It means a lot to me. 

  • Member since
    November 2003
  • From: Sandy Eggo
  • 5,608 posts
Posted by dougdagrump on Saturday, June 22, 2019 2:59 PM

8n, All of my visits are to the cath lab in the hospital, it is their standard procedure. I guess an ounce of prevention is worth a pound of cure. I' ve had so many you'd think they would just install a zipper to make it so much quicker. There is some risk involved but if not checked and corrective action taken the results could be a hell of a lot worse. Had I payed attention to some of the things going on I might have avoided the heart attack that came close to doing me in. As far as worry, I think that is something that we all experience at one time or another.

 

Remember the Veterans. Past, present and future.

www.sd3r.org

Proud New Member Of The NRA

  • Member since
    December 2005
  • From: Sunny So. Cal.
  • 3,784 posts
Posted by dbaker48 on Sunday, June 23, 2019 1:14 AM

Evening,

Just a "quickie", got home this evening 7.5 hrs, 440 miles, El Camino ran great no hickups what so ever!   Gas gauge kept falling over to the left, only issue.  Gas prices ranged from $3.49 to $5.19, extremes were all within a 50 mile stretch in Ca, near Bishop.  Lots and lots of beautiful scenery, nice relaxing drive.

Till later

Don

  • Member since
    April 2006
  • 8,049 posts
Posted by fifedog on Sunday, June 23, 2019 8:06 AM

Mornin' boys.  Sunny & 59 along the Patterson Creek cut-off.  More trim painting today, along with watching NASCAR this afternoon.

Dad and I travelled to Hancock to pick up nephew yesterday morning.  The boy loves trains, and we came back to Fifedom to run the layout.  He filmed the action with his tablet, but a 5 year old filmographer's efforts will give you whiplash. Woof.

  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Sunday, June 23, 2019 8:24 AM

Warming fast and humid.  Nothing on agenda today.

8N, prayers.

Don, glad you had a safe trip home.

Fifey, good nephew report.

Have a good one. 

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    January 2009
  • 1,986 posts
Posted by 8ntruck on Sunday, June 23, 2019 2:48 PM

Quiet day.  Doing 10 pounds or less type of jobs, one of which is digging out some ancient RC boat projects to take to the lake house for entertainment this summer.  One of these is a live setam launch.  The project stalled after hull construction.  Still got to assemble the engine and boiler and finish the boat off.

Of course, I'm going to make some modifications to the boiler to improve steam outout and make valving changes to the engine to convert it into a uniflow design which will improve efficency and performance.

Also need to decide which trains to take to the lake as well.  Looks like we've freed up enough space for a 6' by 9' layout.  Got to decide what to do with it.  Will need to be kid friendly, as my grand nephew will be visiting and will want to run it.

All for now.

  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Sunday, June 23, 2019 8:15 PM

Evening folks!

Was a nice day today. Like da Chief, easy day today. Some distant storms made for a nice afternoon sky viewing. Typ 90's for summer. Sqeeters are starting to appear so evening porch time was cut short.

Fife - fun day!

8n - sounds like some fun projects.

DonB - good trip!

Regards, Roy

  • Member since
    January 2008
  • From: Near Altoona Pa.
  • 1,896 posts
Posted by Banks on Sunday, June 23, 2019 10:35 PM

Hello there,

quick check before I crash.

With the help of my grandson another brush pile ready to light.

Son bush hogged one hay field that was over run by weeds and wild grasses that livestock won't eat. Some of them are so called "ornamental" grasses that have become popular.  The only thing to do is kill it all and start over.  More $$ down the drain.

Yesterday we put manure there. Then a graduation party and capped the day with a drink at a local establishment.

Today was hillclimb. Son didn't do so well. Gonna be sore a few days from a hard landing.

8N......sounds like some good projects.

Best get to sleep. 

 

Prayers for those in need

Banks, Proud member of the OTTS  TCA 12-67310

  

   

  • Member since
    April 2007
  • From: MICH
  • 8,153 posts
Posted by sir james I on Monday, June 24, 2019 8:27 AM

Tiss cloudy and stuffy this morning but boy we finally had a beautiful weekend. It was the right time for it as we had our D3Rs outdoor meet on Saturday. The video is posted on UTube and OGR. This may not make the cut but CTT if your gonna make special offers state in the E-Mail that it's for new subscriptions only. I went through the whole process only to find out at the end it was for new sub only.

S.J.

"IT's GOOD TO BE THE KING",by Mel Brooks 

  Charter Member- Tardis Train Crew (TTC)   - Detroit3railers-  Detroit Historical society Glancy Modular trains- Charter member BTTS

  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Monday, June 24, 2019 8:51 AM

Morning.  87 and humid.  Tomatoes doing good.  About a dozen a day [early for NC].  New ones growing and blooming.

Going east tomorrow so hope back quits being a little sore.  Got lots of help tomorrow. Thumbs Up

Have a good one.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    January 2009
  • 1,986 posts
Posted by 8ntruck on Monday, June 24, 2019 12:09 PM

 

Sunny day today.  Follow up doc appointment #1 for this week this afternoon.

Hade a brain outgassing yesterday - Saw an ad for a great lakes ore boat, then was thinking about having to put the dock in the lake, then made one of those odd connections - A MODEL ORE DOCK!!!  The next search on the computer was 'great lakes ore docks'.  That led to a neat video about the ore dock at Marquette.

Think about it.  A garden railway to deliver ore cars to the dock,  load the RC ore boat, sail it to an unloading dock on the other end of the property, load the ore onto a train to go to the 'smelter'.

All for now.

  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Monday, June 24, 2019 10:22 PM

Evenin' folks!

Nice day today capped by an afternoon Tstorm.

Helped neighbor pull carb off his 1974 Nautique so he could take it to the rebuild shop.

Wife and I hit the grocery store and then I worked on some trim for a window I am rebuilding. 

Watched the Tstorm while grilling some salmon for dinner.

8n - if I did that to my dock the wife would..................Dunce

Regards, Roy

  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Tuesday, June 25, 2019 5:10 AM

Morning.  Out the door headed east.  Have a good one.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    January 2008
  • From: Near Altoona Pa.
  • 1,896 posts
Posted by Banks on Tuesday, June 25, 2019 8:36 AM

Hello there.

Yesterday a couple of outdoor projects and prepping equipment to make hay. Looks like we've got a few days to get started.

Son is OK but was told his bruised tailbone will take a while to heal. Riding the tractor for hours will feel good. Not.

We've had a Sleep Number bed for 4 years. It was near the bottom of their price range. I really like it. I'm an 80 Mrs is 40. we do adjust from time to time.

Best get on with the day.

 

Prayers for those in need.

Banks, Proud member of the OTTS  TCA 12-67310

  

   

  • Member since
    December 2005
  • From: Sunny So. Cal.
  • 3,784 posts
Posted by dbaker48 on Tuesday, June 25, 2019 11:10 AM

Morning,

Boy, it sure is good to be home!  Did put some positive feedback for Wild West Chevrolet in Yearington.

Dennis, that is a long laborous trip, wish you a stress free and benefical trip!

On the train front, did some maintenance stuff yesterday and the repair guy (Ted Silva), gave me a tip on cleaning rollers and wheels.  I sure most of you have a Dremel tool, but a polishing roller is available that cleans the rollers in 30 secs or less.  Also the wheels.  Ted gave me information on the wheel and a sample.  Talk about inexpensive $1.29 each!  They are available at Widget Supply Co. (widgetsupply.com), item number is BET14-425. 

 

Suggest hold the disc at a 45 degree angle and run it across the surface.  A little Denatured Alcohol cleans the wheel and lightly holding a soft cloth next to the surface being cleaned really helps as well.  Works really well!  (Oh yeah, WS is located in Oregon, no sales tax, and shipping is cheap).

Going to do some more of the older stuff, cant believe how much better they run with a good electrical contact!

Banks, Hope your son's recovery is speedy, definetly a pain full experience!

Take care all, have a great day!

 

Don

  • Member since
    November 2003
  • From: Sandy Eggo
  • 5,608 posts
Posted by dougdagrump on Tuesday, June 25, 2019 11:16 AM

Dennis, Another fly in the ointment for buying ammo is that under the new law you are also required to have one of the new "Real ID Driver's License" or some other "Government Recognized Form of ID".  Angry  No

Remember the Veterans. Past, present and future.

www.sd3r.org

Proud New Member Of The NRA

  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Tuesday, June 25, 2019 12:51 PM

It's Tuesday and it is not raining. We need rain. The mud in my front yard is starting to dry up. Whistling.

RT...What a haul from the SPCA store. Wow! 

MikeC....Gutter cleaning sucks.

Kevin...Nice layout and even nicer BNSF locomotive. What brand of gutter guard do you recommend?

8N...I hope you feel better after the surgery. You should. I have a model of the Fitz. Try looking up ore dock at Duluth. 

Don...Great trip even with the blown hose. Our gas price is $2.55 on a bad day. I have been cleaning wheels for years with Dremel and a Scotch Guard wheel. We see them all the time at train shows. If you screw up, they don't do a lot of damage. 

SJ....Don't you love companies that give new customers a better deal than their long time customers? Whistling

Chief...I know I'm a pain in your butt, but I didn't have a thing to do with your back pain. Get well!

Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    April 2005
  • From: South Carolina
  • 9,713 posts
Posted by rtraincollector on Tuesday, June 25, 2019 6:27 PM

Buckeye Riveter

It's Tuesday and it is not raining. We need rain. The mud in my front yard is starting to dry up. Whistling.

RT...What a haul from the SPCA store. Wow! 

Buckeye not even three days later I picked up at RailKing PRR freight set on ebay ( it looks like never used. ) for $13.50 + 27.08 shipping

 

Life's hard, even harder if your stupid  John Wayne

http://rtssite.shutterfly.com/

  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Tuesday, June 25, 2019 10:00 PM

Evening folks!

A day without rain finally. It was mildly humid, not bad.

Dennis - glad everything went well on your trip to the gun auction!

Continued work on the window brick mold fabrication and got everything test fitted. Need to go get more caulk to glue it all together.

 

Regards, Roy

  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Wednesday, June 26, 2019 7:54 AM

Morning folks! Onward!

Regards, Roy

  • Member since
    January 2001
  • From: US
  • 5,369 posts
Posted by cheapclassics on Wednesday, June 26, 2019 10:21 PM

Good evening all,

Long days getting to and at TCA Convention.  Not sure I will be doing this again.  I hope all is good with all of you.  Will Check in with full report when we get home.  Hope to see Roger Carp on Friday.  I hope everyone has a good day.

Keep on training,

Mike C. from Indiana

  • Member since
    April 2006
  • 8,049 posts
Posted by fifedog on Thursday, June 27, 2019 6:45 AM

Mornin' boys.  Cloudy and 67 along the Patterson Creek cut-off.  I think we are visiting my folks today.

Yesterday morning I installed our new LED motion lights on both sides of the garage.  They look nice and are real retina burners.  The bear appreciated them while tearing down the bird feeder overnight.  Glad I could help...

Spent yesterday afternoon in the train room, hot glue gun in hand, shaping cardboard strips into the middle ridge.  Funny, it always works out that the tasks I am weary about turn out just fine.  This ridge separates the penninsula in the center of the layout, with a long timber trestle on one edge, and a freight terminal on the other side.  Grandson is coming next week, so maybe we'll add the "skin" then.

rt - Keep landing them deals.YesCool

Roy - Finished my painting.  Need some brushes...?

sirjames - I checked out the D3R video, and your cameo.

 

  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Thursday, June 27, 2019 8:14 AM

Aloha. Sunny and feels like 'Summer-at-Last' here in the city. That was a nice video, SJ. Fife, that's exactly what I experience too on my projects.  Ran the little Hornby clockwork train last night. It's amazing how well a 60-plus year old tin engine can still run!

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

KRM
  • Member since
    January 2011
  • From: North Bluff above Marseilles IL
  • 6,506 posts
Posted by KRM on Thursday, June 27, 2019 8:26 AM

Morning, Rained like mad in Aurora yesterday but when we got home around 10:00pm we had nothing here. Fine with me.

Just a fly by, MIL has been in the hospital since monday. Lungs full of fluid so they put a drain in and put her on watch. Yesterday because of her age,92 and that she is shutting down they un-hooked her from everything and called in the family. She was still fighting it off at 9:00pm when we left. She has had alzheimer's for a few years now and was not aware of any of us as far as I could tell? Who knows? So not sure what today will bring but it will be another long one for sure. They did not think she would make the night but we have heard nothing as of yet from the BIL?

Buckey Not sure the name of the guards but they are made out of the same material as the gutters not plastic.

 I will see if I can find the paperwork when things slow down some.

 Got to go.

Later.

Up-date, waiting on wife to get ready to go, MIL is still hanging on. Heading back north!

 Buckeye, I checked and here is what is on our house, Hope this helps.

https://www.gutterhelmet.com/

 

Joined 1-21-2011    TCA 13-68614

Kev, From The North Bluff Above Marseilles IL. Whistling

 

  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Thursday, June 27, 2019 9:35 AM

fife dog
Yesterday morning I installed our new LED motion lights on both sides of the garage.  They look nice and are real retina burners.  The bear appreciated them while tearing down the bird feeder overnight.  Glad I could help...

Was he wearing shades? Cool

fife dog
Roy - Finished my painting.  Need some brushes...?

Bring them to Oct York!

90's and sun, sun, sun, fun, fun, fun! 

We had a big 4 burner grill we rarely used. Picked a shady spot and cleaned it up. We have some good friends that recently moved into the area. Hauled it over last night and we built a quick pad for it with concrete stepping stones. Looks brand new and they really appreciated it. Sat outside til 10 consuming cold ones Beer

Kev - prayers for your MIL Angel

 

Regards, Roy

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month