Trains.com

Water pump question

5016 views
42 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Thursday, April 8, 2004 10:49 AM
Chris, I don't think in this application overflow is an issue, as it is a closed system. And just as I was typing that, I had a new idea. FI***ANK CIRCULATION FILTER AND PUMP. Quiet, inexpensive, good volume, and self filtering. Maybe we have been looking in the wrong direction.[:P] One possible problem here lift height. [:(]
  • Member since
    April 2003
  • From: Willoughby, Ohio
  • 5,231 posts
Posted by spankybird on Thursday, April 8, 2004 10:44 AM
Hi all, Try checking a pet store for a pond filter pump. They make several difffernet sizes. As I recall, it less than $65.00

tom

I am a person with a very active inner child. This is why my wife loves me so. Willoughby, Ohio - the home of the CP & E RR. OTTS Founder www.spankybird.shutterfly.com 

  • Member since
    September 2002
  • 548 posts
Posted by Chris F on Thursday, April 8, 2004 10:37 AM
David,

It sounds like a sump pump (single-stage centrifugal) to me. 10 gpm is way too big for your application; typical flow out of a faucet is 2 gpm or less.

Throttling the flow with a valve on the outlet is possible, but the water that does not go to your stream will be recirculated internally in the pump. The energy used to recirculate the water will cause it to heat up, potentially to the point where a pump component will fail. If you go this route, don't run the pump too long!

John's idea of pumping to a reservoir and shutting off the pump with a float switch is excellent. I'd add a second float switch and overflow plumbing as backups. Maybe a water alarm, too!
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Thursday, April 8, 2004 10:25 AM
Why not just put a drain in the floor under the layout, then put a valve on a fresh water source, and forget recirculation. [swg] If you wanted to you could just fill the tub, and tap into the drain. Just watch out for the building inspector, he WILL get you on this one.[:P][:O]
  • Member since
    February 2002
  • From: Mile High City
  • 296 posts
Posted by jkerklo on Thursday, April 8, 2004 10:15 AM
If you are going to go to all the trouble of having water, why not some fi***oo. Some minnows, to scale, would be a nice catch.

With some training, they could be made to jump over obstacles going upstream, just like salmon.

John Kerklo
TCA 94-38455
www.Three-Rail.com
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Thursday, April 8, 2004 10:10 AM
BTW, John's reservoir idea is great! I'm going to be a little less than serious for just a moment. Directly above the layout is the bathtub. I visualize a Rube Goldberg-type system of piping from the tub to the layout. After taking a bath, the water flows down the pipes and into the layout and then exits the layout thru pipes in the house, going out to the tomato patch. From there, it gets filtered thru the soil and a solar-powered groundpump than rehoists it up to the tub again for fresh bathwater.
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Thursday, April 8, 2004 10:06 AM
Elliot,

Sorry, but I was laughing when you mentioned hand crank. I conjured up this image of farmers drawing water with an Archimedes screw device.

John has some very interesting ideas worthy of experimentation!

dav
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Thursday, April 8, 2004 10:00 AM
The NP logo is called a MONAD.

OK so the dimmer idea is out. How about one of those hand crank fuel transfer pumps, and a pulley and motor arrangement like John suggested.
  • Member since
    February 2002
  • From: Mile High City
  • 296 posts
Posted by jkerklo on Thursday, April 8, 2004 9:45 AM
The pump probably uses an induction motor, which doesn't respond to a dimmer switch kind of control.

John Kerklo
TCA 94-38455
www.Three-Rail.com
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Thursday, April 8, 2004 9:43 AM
I'm still searching the web; lots of choices but none made specifically for my purpose. I even found a "free energy pump" for 3rd world countries. I believe it operates on a solar panel and pumps ground water up for irrigation. I also found a yin-yang pump, with the cool yin-yang symbol on it (like the Northern Pacific logo). They were sold out.

Problem w/pump is need to raise the water up about 8 feet but not produce a lot of volume; 2 seemingly contradictory things.

If I don't find the pump I need, I'll explore the valve options and try to speak to someone more knowledgeable than the person I spoke with. I will, once I get the pump, be sure to let you all know the results.

BTW, the dimmer switch is an interesting idea. Or, perhaps, some well-placed resistors.

Thanks

dav
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Thursday, April 8, 2004 9:35 AM
OK Dave, you got me on this one, I have no experience here. So here is my totally off the wall idea, how about a dimmer switch??? I'm just not sure if it would harm the pump motor, but I don't see why it would.
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Thursday, April 8, 2004 9:35 AM
I suspect that this is a centrifugal pump. I wouldn't be surprised if you can reduce the flow simply by putting a restriction, like a partially closed valve, in the pipe. I have never tried such a thing with a water pump; but I know that centrifugal air blowers are not at all harmed by doing that. In fact, the motor is unloaded. You can see an illustration of this with an ordinary vacuum cleaner: If you block the airflow with your hand, the motor speeds up noticeably. If you can get a demonstration of the pump, you can do the same test with it. Or just ask WaterAce.

Bob Nelson

  • Member since
    February 2002
  • From: Mile High City
  • 296 posts
Posted by jkerklo on Thursday, April 8, 2004 9:31 AM
Won't just a valve on the output end restrict the flow and allow you to adjust it to only what you want?

Or, get a pump (no motor) and hook it up to a motor with a pulley arrangement. By changing pulleys, you can adjust the flow.

Another way. Have a small reservoir at the head (hidden), adjust gravity flow from the reservoir to the stream bed. The pump fills the reservoir and is controlled (on/off) by a fill switch. Maybe the layout needs a lake; use it for the reservoir.

10 GPM seems like a lot. Maybe a smaller one.

Make a large reservoir at the top. Normally, there is just a trickle flow, but every now and then there is a flash flood, just like in a real western stream bed.

Actually, having a changing flow rate might be a good idea; adds a little more interest to the stream.

It might also be useful to plumb some valves and a drain connection. Then the pump could be used to drain the whole thing. The water is going to get really foul after a while.
A little bleach will help, but stink.

John Kerklo
TCA 94-38455
www.Three-Rail.com

  • Member since
    August 2003
  • 6,434 posts
Water pump question
Posted by FJ and G on Thursday, April 8, 2004 8:17 AM
Lowe's is having a sale on waterpumps (1/6 HP WaterAce). Price is $65. I called WaterAce to ask about the characteristics of it. Quiet. Yes. Pumps 10 gpm and can raise the water 10 feet. Pretty good.

Regulator?

No.

That presents a problem. 10 gpm is at least twice the action I need. I want water flowing down my desert stream, not a deluge in my basement? The lady I spoke with said she knows of no way to regulate it and has never heard of a water pump with a regulator on it (isn't it fun talking to "knowledgeable" people?).

I'm gonna surf the web today to try & find what I need but I was wondering if there can't be some way to regulate the flow coming out of the pump. That $65 is a nice price.

dav

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month