starman Rich - I will give a second thought to the reversing loops. After I have my track plan drawn to scale, I will hopefully know how to send a full size picture and I will have some specific questions about setting up the reversing loop. Jack
Rich
Alton Junction
Jack
I have used Flickr but not Anyrail. I guess they produce thumbnail pic. Glad we are OK.
Henry
COB Potomac & Northern
Shenandoah Valley
These postage size pics make it too hard. I'm not quite sure how you managed to do that, but if you are entering dimensions in with the picture icon in this forum, don't.
Also I expressed concern in my previous post about the access to your layout. In your new plan there is a peninusla on the left. If there is aisle access to the right of that in a U shape to the other side of the layout, you better not be a supporter of the obesity epidemic
This sounds snarky, my apologies, because I don't mean it to sound that way, read it as tough love
starman, as to the first part of your most recent reply, there is nothing all that complicated about setting up a single reversing section with those two left side crossovers wired as part of the reversing section. That would only require one auto-reverser. The only "complication" would be coordinating multiple trains on the same track, but even that is no big deal. Before you give up on that track plan, give your decision some second thought. We are here to help you through the process.
As to the second part of your most recent reply, speaking for myself, I am not at all sure that I understand your question or your track diagram. If others are also confused, you may want to redraw the track diagram and rephrase the question. Is the loop that you have drawn considered the yard? If so, where are the yard tracks?
ROBERT PETRICK because of the proximity, the two crossovers could be effected by a single store-bought double crossover manufactured by ME or Shinohara or somebody (there are many threads devoted to these). I've never used one, but I assume the internal wiring and jumpers and whatnot can be set to solve any electrical/mechanical issues or conflicts that arise.
because of the proximity, the two crossovers could be effected by a single store-bought double crossover manufactured by ME or Shinohara or somebody (there are many threads devoted to these). I've never used one, but I assume the internal wiring and jumpers and whatnot can be set to solve any electrical/mechanical issues or conflicts that arise.
If you include the entire double crossover inside a single reversing section, it is easy to wire.
richhotrain Since two trains could traverse the straight through routes at the same time but only one train can use the diagonal routes without a collision . . .
Since two trains could traverse the straight through routes at the same time but only one train can use the diagonal routes without a collision . . .
Yes. Because of the proximity of the two crossovers, some sort of interlocking protocol would be needed. And by definition, cross traffic in either direction would have to wait. Also because of the proximity, the two crossovers could be effected by a single store-bought double crossover manufactured by ME or Shinohara or somebody (there are many threads devoted to these). I've never used one, but I assume the internal wiring and jumpers and whatnot can be set to solve any electrical/mechanical issues or conflicts that arise.
Robert
LINK to SNSR Blog
No argument here, Robert. If you use one auto-reverser, there will need to be some additional caution with the operation of more than one train through the reversing section. If you use two auto-reversers, the wiring and gapping gets a bit more complicated, but then two trains can be entering and exiting the entire reverse complex at the same time.
Since two trains could traverse the straight through routes at the same time but only one train can use the diagonal routes without a collision, I would opt for one auto-reverser, treating the entire complex as one reversing section. A second train would need to stop outside of the reversing section to prevent a polarity conflict.
Okay, good. No fiasco here.
I see two reversing loops. I'd call them the 'right inner loop' and the 'left inner loop'. There is another outer loop that should be wired exactly like the right inner loop and has no bearing on the subject, so Henry's ADHI and the right side of Rich's two-rail two-color sketch can be ignored.
Both the inner loops are pretty long, so train lengths can be pretty long. I'd gap the rails at the crossovers like Rich suggests. But since each crossover is made up of two turnouts, and since all four turnouts face each other, there might need to be some more internal gaps depending on the style of turnout (live frog or dead frog) and/or manufacturer. To minimize the number of insulated rail joiners, I'd try to coordinate those internal gaps with the gaps required for reversing.
Tony's Train Exchange makes some pretty nice, reliable, reasonably-priced devices that combine the features of auto reversing and power management. I'd buy two.
I always use a 2-rail color system to identify and resolve reverse polarity issues.
If you look at the upper portion of the diagram below, with both mainlines wired the same way, blue rail on top and red rail below, you can see that the two crossovers on the right have matching polarities with their connecting tracks. But, in the two crossovers on the left, blue meets red and red meets blue, reverse polarities.
One way to resolve the problem is to gap the rails on either side of those two crossovers and wire everything inside the gaps with the blue rail on top and the red rail below, as shown in the lower portion of the diagram. Add an auto-reverser to control this single reversing section and you are all set. To make the reversing section longer than the longest train, simply extend the gaps, as needed, at the far left in the diagram.
When you simplify it to the schematic that Robert did, B-F is the left most crossover, and C-E is the middle crossover. Schematically it can be treated as a dogbone layout, so you can actually get away with putting gaps to the left of B and the left of E, and making the loop between those points the reversing section. Then you get a reversing section larger than the largest train and should have no problems.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
Tried to resist but gave in. I agree there are two reversing loops as described by Big Daddy and Robert. I also agree with Rich that one isloated section with one AR can get the job done. Using Daddy's diagram I would isolate both rails on the divergent track between turnouts B and F, and both rails between the divergent track between turnouts C and E. Next I would go a few feet to the left of turnout B and isolate both rails. Next I would go to the right of turnout C a few feet and isloate those two rails(probably at the point end of turnout D). This will make the track section with turnouts B and C islolated from the rest of the layout. Power the section from a few feet to the left of B to the point a few feet the the right of C with the AR. Although it is desireable to have the reversing section longer than you longest train it is not absolutely mandatory. I would stagger the cuts in the rails on the straightaways to reduce the chances for a short. It is also possible to be parking one loco on a part of the isloated section while another makes the crossover. That is not a desireable and is a weakness in the plan, but doeable. Idea is not set in stone and other comments are welcome as I may have missed something.
I like to reduce things to schematics. Makes it easier to see what's what.
gdelmoro Rich can he avoid reversing loops by the way he wires? Like it was suggested for my layout?
Rich can he avoid reversing loops by the way he wires? Like it was suggested for my layout?
I have relented long enough to take a quick look at the diagram.
I see two folded mainlines with crossovers.
The two crossovers on the right pose no problems, as long as both mainlines are wired the same way, but the two crossovers on the left give rise to reverse polarity.
It looks like one reversing section could be created to resolve the problem, if only one train is running on each mainline.
I am feeling very lazy this morning, so I am willing to concede that I may be wrong but, at first glance that is how I see it.
richhotrain floridaflyer Off hand I see three and probably four. After that last fiasco with reversing loops, I'll sit this one out. LOL. I haven't looked at the diagram yet, but I feel the same way. No good deed goes unpunished. Rich
floridaflyer Off hand I see three and probably four. After that last fiasco with reversing loops, I'll sit this one out.
Off hand I see three and probably four. After that last fiasco with reversing loops, I'll sit this one out.
LOL.
I haven't looked at the diagram yet, but I feel the same way.
No good deed goes unpunished.
Gary
floridaflyerAfter that last fiasco with reversing loops, I'll sit this one out.
A bigger picture
From top to bottom label the tracks 1,2,3 and 4 I've labeled the turnouts. Track 1&4 are the same loop as are 2&3 but work with me here.
My code is the train takes each letter turn out and follows that path. In the 1st reversing loop the train is going counter clockwise on track 1, takes turnout a to track 2 goes around back to near the top of the page where I've called it track 3, takes the switch g & e (it's now reversed on track 2) and if it continues onto track 1 via da it has reversed with respect to track 1
Reversing loops:
#1 track 1 adge track 1 adgeda track 2 eg track 3 ge track 3 hiadeg#2 track 2 daihfb track 2 bf track 3 fb {same as track 4 from ihfb} The problem with my count is your segments ge and fb are too short to be reversing loops.
I have no idea where to put AR's but now we have bigger pic, turnouts that we can all refer to and my take on where reversing is going on, feel free to argue with that.
If you made a bunch of copies and traced out each reversing loop with colors for both tracks, it might be more obvious which loops could be shared by the same reverser.
Final edit, is this HO scale? Are the blocks 1 foot? If so it looks like 15" radius curves and there is no easy way to get inside the area where I placed the letter i
I can't see your diagramme clearly because its size is very small. However, I believe I see at least two places where you have reversing loops, but apparently four places. Again, it's only a guess.
I have attached a modified track plan that I am attempting to put together. I am really not very good with using the program I used to create this track plan, but I believe you can see what I am trying to do.
I am at a point where I need some help with reversing loops. I am afraid I have created a track plan that is beyond what I know how to wire.
Please look at the attached image. Where have I created reversing loops? Where would they start and stop? How and where would I install insulators and AR1's to make this work electrically?
Thanks for your time and help.