Trains.com

Trackside Lounge, Milepost 0906.01--no defects

32249 views
332 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Wednesday, June 10, 2009 8:33 PM
Fully understood, Quentin! I certainly wouldn't mind spending some time at the Mickey D's with the two of you and check this out for myself--with plenty of trains to use as examples, of course!

With Pat now having a bike of her own, we might come to Muncie prepared to ride next time!

Glad to hear that Jean is doing so well after cataract surgery.

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    February 2002
  • From: Muncie, Indiana...Orig. from Pennsylvania
  • 13,456 posts
Posted by Modelcar on Wednesday, June 10, 2009 8:45 PM

Carl, that would be great....Keep us informed and perhaps this time we can all have a lunch together.

You will find plenty of miles available on our Trail.  Plus 30 now.  Noted they even had the "depot"....{Trail Head}, open this last weekend.  It is normally "staffed" 5 days a week.  That is:  Cardinal Greenway Trail.  I'm sure you can pull it up on the 'net if you care to take a look at info, etc.

Quentin

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Thursday, June 11, 2009 5:33 AM
Not likely to happen this summer, unfortunately, Quentin.

Looks like you folks got a soaking overnight! Interestingly, this system hasn't hit us yet, but is due to shortly--from the south!

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    February 2002
  • From: Muncie, Indiana...Orig. from Pennsylvania
  • 13,456 posts
Posted by Modelcar on Thursday, June 11, 2009 11:50 AM

....We'll look forward to when you can make the trip Carl.

And yes, exactly 1 inch in my rain gauge.  Sun is just now trying to break thru after a dark overcast and light rain, morning.

Quentin

  • Member since
    December 2005
  • From: MP 175.1 CN Neenah Sub
  • 4,917 posts
Posted by CNW 6000 on Thursday, June 11, 2009 4:52 PM

Anyone here heading to the Illinois Rail Museum for Diesel Days 2009?  I think (knock on wood) I talked Misty into going and taking Aedan (of course, that depends on when he arrives) and she sounded enthusiastic about going!  I'm guessing about 2 and a half weeks to go now...better go check the signal board.

Dan

  • Member since
    January 2009
  • From: Norfolk Southern Lafayette District
  • 1,642 posts
Posted by bubbajustin on Friday, June 12, 2009 10:33 AM

Wow! This place is nice! I hope you guy's don't mind me stopping in now, and then.

I haven't been doing all that well. Last night I had horrid chills, and was running a temp of 102.9*. Doc. says I'll make it.

 

Well, on the way home from the doctor dad took me the back way and we met a NS unit grain train.

 

Here NS D9-40CW, and NS SD70M (Ican't make out the # when typing this) come hauling past just outside of Attica.

 

 
 
I hope you guy's like it.  4 weeks and 1 day till our vacation! Carl, if the cardnial is running late will that hold the CZ for us, or will we be screwed?

The road to to success is always under construction. _____________________________________________________________________________ When the going gets tough, the tough use duct tape.

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Saturday, June 13, 2009 5:21 AM
You must have had the chills, Justin--even your writing is blue! Hope you're feeling better now.

Not sure whether they'd hold the CZ as a matter of course, but I have heard of some trains waiting for connections. Two suggestions:

Call "Julie" at Amtrak to check on the progress of your train before you go down to the depot and wait (and wait, and wait...). This won't change things as far as the connection, but it might be reassuring to your family.

Once you board, tell your conductor that you have a connection to make, and check his response. If the timing is going to be close (i.e., a few minutes), he may be able to get them to hold the CZ for you.

Patricia and I have been quite busy, making use of the computer to edit a book that her brother has written. It honestly took me the whole evening to catch up with what Pat had gone through, and at this rate it will be well over a week before we're completely done. Still, if you're into science-fiction and space travel, you might be able to find it on Lulu once we're done with it (I can provide more details, if desired, once the editing is done--it's available on Lulu now, but our edits will be worth the wait!).

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    January 2009
  • From: Norfolk Southern Lafayette District
  • 1,642 posts
Posted by bubbajustin on Saturday, June 13, 2009 9:26 AM

Thanks Carl. I will look into that. Mom say's we normally do call "Julie" when we get to the station. We will tell the conductor we have to catch the CZ. I never thought that. I assume that if the train is running 5 hour's late the CZ will not be held up just for us.

I'm doing much better now Carl. Thanks for asking. I was chilling quite badly in fact. I had 2 thick blanket's and a heting pad on high on me. I feel much better now. I'm just typing in these letter's because I was tinkering around and found out how to change font types and color. I already know how to bold.

Have a good day, and weekend everyone!

The road to to success is always under construction. _____________________________________________________________________________ When the going gets tough, the tough use duct tape.

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Sunday, June 14, 2009 5:06 AM
Wow--today is my grandson's first birthday, and my own baby daughter receives her Master's degree in viola performance.

More to the point for us, though, it's Matt Kohnen's eighth birthday! It's been a pleasure to watch this young guy handle himself at busy spots like Deshler, and to see how the older guys respect him and look after him--he's definitely one of the gang, yet one in a million. Happy birthday, Matt! Hope the weather cooperates over your way, and don't eat too much cake!

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    January 2009
  • From: Norfolk Southern Lafayette District
  • 1,642 posts
Posted by bubbajustin on Sunday, June 14, 2009 1:41 PM

Yes Carl, I almost forgot, Happy B-Day to Matt! I'll shoot Joe an E-mail, and tell him.

A Really quite hot Indiana summer day here. humid and a cloudless 80*. Oh well, humidaty isn't too bad at the moment and there is a nice cool breeze blowing throught the garage into the house. It is really relaxing. Cool

The road to to success is always under construction. _____________________________________________________________________________ When the going gets tough, the tough use duct tape.

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Sunday, June 14, 2009 3:40 PM
Matt has a new bike, I'm told--so that means they all have bikes. I'm looking forward to having a fivesome on the Prairie Path between here and Glen Ellyn or Wheaton when they all can head our way.

I also wished my grandson a happy first birthday over the phone. Couldn't understand his reply, but my daughter assures me that he was thanking me for thinking of him. It was enthusiastic enough!

We were close to 80 degrees today, too, and I'll have to take advantage of the lack of rain to tackle our lawn again. With all of the rain we're getting, there's less opportunity for mowing, and more need.

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    December 2001
  • From: Northern New York
  • 25,020 posts
Posted by tree68 on Sunday, June 14, 2009 5:35 PM

Matt's quite the young man - I think he knows the trains at Deshler better than many of the adults!  With any luck I'll see them again this summer - assuming I can include Deshler in my trip to the eastern midwest.

Happy Birthday, Matt!  I'll save some fries!

LarryWhistling
Resident Microferroequinologist (at least at my house) 
Everyone goes home; Safety begins with you
My Opinion. Standard Disclaimers Apply. No Expiration Date
Come ride the rails with me!
There's one thing about humility - the moment you think you've got it, you've lost it...

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Sunday, June 14, 2009 8:04 PM
How far into the eastern Midwest do you plan on going, Larry? According to Mookie, she's in the True Midwest, which puts Chicago pretty far east. (I've pointed out to her that Ohio, Indiana, Michigan, and Wisconsin were once considered the Northwest Territories, but I don't think that convinced her of anything.)

I was able to convey Pat's and my birthday greetings to Matt by phone a few hours ago.

More good news from my younger daughter--she captured two writing awards at her school, one for a paper in musicology and one in music theory (and she's been a performance major!). Also, it appears that we'll be having two family reunions in two days during August, while she and her husband are here from California. The one for Pat's side of the family was the reason they're coming when they are; my family is going to have one the following day, about 40 miles distant. Not sure yet whether my aunt and cousins will be there, but my mother and sisters (and some of my daughters' cousins) will be.

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    December 2001
  • From: Northern New York
  • 25,020 posts
Posted by tree68 on Sunday, June 14, 2009 8:15 PM

I grew up believing that Michigan was considered part of the midwest.  Out of deference to Madam La Mook, I'll refer to it as the eastern midwest.

As it stands, US23 will probably be close to the limit - venturing a little further west to hit Owosso (chief reason for the trip) and Deshler (for a day or three of camping at a certain diamond), plus some friends in the old stomping grounds.  There's a reunion for the class following ours in August, but that's to far from the big event in Owosso, so I'll be skipping it.  That's unfortunate, 'cause I knew a lot of those kids pretty well.

And I do remember from my Michigan History and Government that Michigan was part of the "Northwest Territory."  In fact, I'm pretty sure that all of the states that made up said territory had their townships laid out exactly the same way - 6 miles square, and referred to based on a baseline and a meridian.  My old hometown was township 2 north, range 7 east, IIRC.  That shows up in deeds all the time.

LarryWhistling
Resident Microferroequinologist (at least at my house) 
Everyone goes home; Safety begins with you
My Opinion. Standard Disclaimers Apply. No Expiration Date
Come ride the rails with me!
There's one thing about humility - the moment you think you've got it, you've lost it...

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Sunday, June 14, 2009 8:43 PM
How could I forget the big events in Owosso?

And quite often a county consisted of about 16 of those townships. The township I grew up in was a little bigger than 6x6, due to water formations, but those dimensions applied to many others in the county. It's the same here in Illinois--our county is roughly square, and I think there are 16 townships in it. We're two from the top on the eastern edge. I could look up the township and range back in Michigan, but I have no idea of how that works here in Illinois. I do know that rural addresses (those not within the limits of any municipality) are based on Chicago's baseline--our section is 19W and 0N.

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    August 2005
  • From: At the Crossroads of the West
  • 11,013 posts
Posted by Deggesty on Sunday, June 14, 2009 10:13 PM

tree68

I grew up believing that Michigan was considered part of the midwest.  Out of deference to Madam La Mook, I'll refer to it as the eastern midwest.

As it stands, US23 will probably be close to the limit - venturing a little further west to hit Owosso (chief reason for the trip) and Deshler (for a day or three of camping at a certain diamond), plus some friends in the old stomping grounds.  There's a reunion for the class following ours in August, but that's to far from the big event in Owosso, so I'll be skipping it.  That's unfortunate, 'cause I knew a lot of those kids pretty well.

And I do remember from my Michigan History and Government that Michigan was part of the "Northwest Territory."  In fact, I'm pretty sure that all of the states that made up said territory had their townships laid out exactly the same way - 6 miles square, and referred to based on a baseline and a meridian.  My old hometown was township 2 north, range 7 east, IIRC.  That shows up in deeds all the time.

Back some two hundred or years ago, anyplace west of the Alleghenies and north of the Ohio was called the Northwest, and, in time, came to be known as the Midwest. Ricki's father was from Dayton, and his wife (Germantown, Pa., and Brookline, Mass.) spoke of him as being a "midwesterner."

Other states that were settled after the USA came into being used the township system to locate property, always referring to the baseline and the meridian. Back in the sixties, I did a bit of research in Mississippi, and discovered IIRC that the sections were numbered west to east (1-6) for the northern-most six, then east to west (7-12) for the row, and then alternated the direction for each succeeding row.  Of course, watercourses and topography brought some irregularity into the system. Or, was it townships that were numbered in this alternating fashion?

And, if you have an exactly square acre (43560 square feet), it is 208.710325571113 (to 12 places) feet on each side. It's no wonder that a land description would read "so many acres, more or less." I had to work this out slowly as I could not find a square root function on my spreadsheet. Of course, we get into the matter of sig figs here. Two decimal places is probably sufficient.

I believe that Lousiana had its own system (parishes and no counties, as well as a different legal system that was based on the Napolonic Code, etc.)

Larry, do you know the baseline and meridian?

Johnny

Johnny

  • Member since
    February 2002
  • From: Muncie, Indiana...Orig. from Pennsylvania
  • 13,456 posts
Posted by Modelcar on Sunday, June 14, 2009 10:57 PM

Almost anyone in this Indiana area will refer to it as the "Midwest"...

Quentin

  • Member since
    December 2001
  • From: Northern New York
  • 25,020 posts
Posted by tree68 on Monday, June 15, 2009 8:03 AM

Deggesty

Larry, do you know the baseline and meridian?

As suggested in Carl's post, I'm pretty sure each state has their own. 

In Michigan, the baseline is Eight Mile Road in the Detroit area. All of the counties west across the state have that line as a county line.  Find the border between Wayne and Macomb Counties (or Wayne and Oakland) and follow it west. 

The meridian is just east of Lansing and runs straight through the middle of Ingham County.  The county lines between Hillsdale and Lenawee Counties, Clinton and Shiawassee Counties, and Gratiot and Saginaw Counties are all on the meridian.

Each township was also divided into sections - a square mile (640 acres).  Many property descriptions will have verbiage to the effect that the property is located in the "E 1/2 SE 1/4 of Section 1, Township 2 north, Range 7 east".

While looking for examples, I found descriptions along that line as far west as Iowa.

That's today's civics lesson....   Smile

LarryWhistling
Resident Microferroequinologist (at least at my house) 
Everyone goes home; Safety begins with you
My Opinion. Standard Disclaimers Apply. No Expiration Date
Come ride the rails with me!
There's one thing about humility - the moment you think you've got it, you've lost it...

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Monday, June 15, 2009 8:16 AM
You're right, Johnny, those are sections that are numbered in that back-and-forth method. It's the same here as in Michigan.

What's really fascinating to me is that not all miles are created equal--they have to compensate for the narrowing of the meridians as one gets closer to the poles. In Michigan, I remember, there are three or four places where mileage is adjusted--the further you get from the Prime Meridian (Larry, you'd be east of it; I'll stay west of it), the more marked the changes became. So those straight north-and-south roads would take quite a jog when they'd come to these points.

Of course, when I refer to mowing the North Forty (which I have to do today!), it's a throwback to when property consisted of multiples of forty acres (a quarter-mile square). We don't really have forty acres back there (or even one), but it's still kind of fun.

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Monday, June 15, 2009 2:16 PM
Just saw that Norris ("Murphy Siding") has been made a moderator. Of course, that means that he'll be turned away at the Lounge door from now on.

Just kidding, of course! Congratulations, Murph! You certainly were there when needed this weekend!

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    August 2008
  • From: Calgary AB. Canada
  • 2,298 posts
Posted by AgentKid on Monday, June 15, 2009 4:23 PM

Thought I would join you nice folks over here in the lounge

CShaveRR
when I refer to mowing the North Forty

 

From the time we moved to Calgary my Train Dispatching father said he had to "run the plow" every time he had to shovel the snow off of our sidewalks. And it was always funny in the spring when both of my parents, who come from rural backgrounds and live in a house with a fifty two foot lot, would talk about getting out on the land.

And it is nice to hear we are getting a new moderator, this past weekend certainly had its' annoying moments.

AgentKid

 

So shovel the coal, let this rattler roll.

"A Train is a Place Going Somewhere"  CP Rail Public Timetable

"O. S. Irricana"

. . . __ . ______

  • Member since
    October 2006
  • From: Allentown, PA
  • 9,810 posts
Posted by Paul_D_North_Jr on Monday, June 15, 2009 4:24 PM

tree68

Deggesty

Larry, do you know the baseline and meridian?

As suggested in Carl's post, I'm pretty sure each state has their own. 

In Michigan, the baseline is Eight Mile Road in the Detroit area. All of the counties west across the state have that line as a county line.  Find the border between Wayne and Macomb Counties (or Wayne and Oakland) and follow it west. 

The meridian is just east of Lansing and runs straight through the middle of Ingham County.  The county lines between Hillsdale and Lenawee Counties, Clinton and Shiawassee Counties, and Gratiot and Saginaw Counties are all on the meridian.

Each township was also divided into sections - a square mile (640 acres).  Many property descriptions will have verbiage to the effect that the property is located in the "E 1/2 SE 1/4 of Section 1, Township 2 north, Range 7 east".

While looking for examples, I found descriptions along that line as far west as Iowa.

That's today's civics lesson....   Smile

Yes - each state's Meridian (in the North-South direction) and Baseline (East - West direction) is generally separate and independent from those of other states - although Michigan's is shared with Ohio's. See:

http://www.earthpoint.us/Townships.aspx 

http://en.wikipedia.org/wiki/Public_Land_Survey_System

http://en.wikipedia.org/wiki/Michigan_Meridian 

Usual disclaimers apply on the Wikipedia articles.

There are several on-line references and even "calculators" to graphically show where a certain description of land is in this system.  For example: 

http://leehouse.tripod.com/twpCalc2.htm 

For more info on this, search for "township & range" and "Michigan", or similar.

But those of us in non-PLSS states - such as here in Pennsylvania - think that's awful boring, compared to our legal descriptions that include such things as "an old oak tree", "the post in John's garden", "a stone in the road", "the fish under the rock in the stream at the bottom of the hill", and so on.  Where's the fun in that ?

Oh ye of literal minds . . .

- Paul North.

 

"This Fascinating Railroad Business" (title of 1943 book by Robert Selph Henry of the AAR)
  • Member since
    August 2008
  • From: Calgary AB. Canada
  • 2,298 posts
Posted by AgentKid on Monday, June 15, 2009 4:44 PM

Paul_D_North_Jr
the property is located in the "E 1/2 SE 1/4 of Section 1, Township 2 north, Range 7 east".

 

Alberta, Saskatchewan, and Manitoba also use this system. The baseline is near the Ontario/Manitoba border. We end the description with west of so and so meridian. Calgary is in an odd situation because Barlow Trail between Memorial Drive and McKnight Boulevard is right on the Fifth Meridian. So Calgary lot descriptions can either be "West of the Fourth", or "West of the Fifth".

But what I really wanted to say is that is how my Father's Birth Certificate read. His original Birth Certificate was lost in a fire and when he needed a new one to renew his Driver's License once, he got one with a land description because in the intervening years the town he had been born in became unincorporated and everything taken away. This created difficulty when he had to get a passport because they want a name, not a land tittle description. So the Government put the original town name back on it and he ended up in a situation where his Passport and Birth Certificate didn't match. He passed way in 1992, years before world travel got complicated.

AgentKid

 

So shovel the coal, let this rattler roll.

"A Train is a Place Going Somewhere"  CP Rail Public Timetable

"O. S. Irricana"

. . . __ . ______

  • Member since
    December 2001
  • From: Northern New York
  • 25,020 posts
Posted by tree68 on Monday, June 15, 2009 5:09 PM

Paul - Wish I could get hold of the deed from where I last lived in MI - according to the Google Earth display, the property straddled two sections (never mind not having a true N-S or E-W border).   I did get lucky, though, and was only one section off.  Even though I didn't recall what section(s) we were in, I still remember the range (2N, 7E).

Where I live in NY (and most of NY for that matter) the townships appear almost haphazard.  Every now and then you'll see some semblance of order, but not often.

LarryWhistling
Resident Microferroequinologist (at least at my house) 
Everyone goes home; Safety begins with you
My Opinion. Standard Disclaimers Apply. No Expiration Date
Come ride the rails with me!
There's one thing about humility - the moment you think you've got it, you've lost it...

  • Member since
    August 2005
  • From: At the Crossroads of the West
  • 11,013 posts
Posted by Deggesty on Monday, June 15, 2009 5:15 PM

I'll respond to several friends in one post:

Larry: Each township was also divided into sections - a square mile (640 acres). Many property descriptions will have verbiage to the effect that the property is located in the "E 1/2 SE 1/4 of Section 1, Township 2 north, Range 7 east".

This system can be a bit difficult to interpret when you first read it, especially if the plot is really small. But, it is accurate, more so than the one Paul mentions. Of course, when you have irregular boundaries, you can have difficulty in describing it correctly. And, really small lots (even as great as five acres) need more exacting descriptions.

Carl: What's really fascinating to me is that not all miles are created equal--they have to compensate for the narrowing of the meridians as one gets closer to the poles. In Michigan, I remember, there are three or four places where mileage is adjusted--the further you get from the Prime Meridian (Larry, you'd be east of it; I'll stay west of it), the more marked the changes became. So those straight north-and-south roads would take quite a jog when they'd come to these points.

Carl, don't you mean as you get farther from the baseline?

I always understood the Prime Meridian to be the one that runs through Greenwich, England (0o 0' 0"); does Larry live in England or on the Continent?Smile

I had never thought of the jogs in section-line roads as being caused by changes in latitude, but, as you say, this is necessary if you use the same baseline as you go north any great distance.

Paul: But those of us in non-PLSS states - such as here in Pennsylvania - think that's awful boring, compared to our legal descriptions that include such things as "an old oak tree", "the post in John's garden", "a stone in the road", "the fish under the rock in the stream at the bottom of the hill", and so on. Where's the fun in that ?

Oh ye of literal minds . . .

Ah, yes, as though the oak tree would be there forever, or John would never have to move his post, etc.

And, AgentKid: But what I really wanted to say is that is how my Father's Birth Certificate read. His original Birth Certificate was lost in a fire and when he needed a new one to renew his Driver's License once, he got one with a land description because in the intervening years the town he had been born in became unincorporated and everything taken away. This created difficulty when he had to get a passport because they want a name, not a land tittle description. So the Government put the original town name back on it and he ended up in a situation where his Passport and Birth Certificate didn't match. He passed way in 1992, years before world travel got complicated.

Wow! International travel was much simpler, even seventeen years ago. Of course, up through our trip this year, we needed only birth certificates and/or driver's licenses to go into and out of Canada (always by train). We do have passports now.

Johnny

Johnny

  • Member since
    August 2005
  • From: At the Crossroads of the West
  • 11,013 posts
Posted by Deggesty on Monday, June 15, 2009 5:31 PM

tree68
Where I live in NY (and most of NY for that matter) the townships appear almost haphazard.  Every now and then you'll see some semblance of order, but not often

 

Yes, see what you end up with when you let people come in any old way and settle, and how much more orderly it is if you lay the land out before you let people settle on it.Smile

Johnny

Johnny

  • Member since
    January 2009
  • From: Norfolk Southern Lafayette District
  • 1,642 posts
Posted by bubbajustin on Monday, June 15, 2009 6:17 PM

GUY'S, I STRONGLY URGE YOU ALL TO LOOK, AND POST TO MY RECENT THREAD CALLED "THANK THE MODS." GRANDPAW PETTIBONE WANTS US ALL TO HIT THE REPORT ABUSE BUTTON FOR THE GUY BY THE NAME OF PHUNK YOU, GOOD MORNING LOOSERS, AND MANY OTHER NAMES. PLEASE VISIT THE POST THANKS TO THE MODS.

THANKS

YOU KNOW WHO.

The road to to success is always under construction. _____________________________________________________________________________ When the going gets tough, the tough use duct tape.

  • Member since
    December 2001
  • From: Northern New York
  • 25,020 posts
Posted by tree68 on Monday, June 15, 2009 7:43 PM

Deggesty
I always understood the Prime Meridian to be the one that runs through Greenwich, England (0o 0' 0"); does Larry live in England or on the Continent?Smile

Ah, but that's the Prime Meridian.   Not to be confused with the sub-prime meridian, or Meridian, Mississippi (which I'm sure the local residents feel is prime...).   Evil

 

LarryWhistling
Resident Microferroequinologist (at least at my house) 
Everyone goes home; Safety begins with you
My Opinion. Standard Disclaimers Apply. No Expiration Date
Come ride the rails with me!
There's one thing about humility - the moment you think you've got it, you've lost it...

  • Member since
    June 2001
  • From: Lombard (west of Chicago), Illinois
  • 13,681 posts
Posted by CShaveRR on Monday, June 15, 2009 8:47 PM
Shhh, Justin--indoor voice!

Seriously, all caps, boldface, and large, readable lettering is a bit of overkill, and I'm all sure we agree with your sentiments about this person.

Perhaps, now that you've gotten our attention, you can edit your post to reduce the type size. Thanks!

Carl

Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)

CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)

  • Member since
    May 2005
  • From: S.E. South Dakota
  • 13,569 posts
Posted by Murphy Siding on Monday, June 15, 2009 9:24 PM

CShaveRR
Just saw that Norris ("Murphy Siding") has been made a moderator. Of course, that means that he'll be turned away at the Lounge door from now on.

 

Just kidding, of course! Congratulations, Murph! You certainly were there when needed this weekend!

Laugh  Oh- if only the trolls were as nice as the folks here!Approve

Thanks to Chris / CopCarSS for my avatar.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy