HO wall mount

Posted by Anonymous

on Tue, Jun 28 2005 7:44 PM

Brand new to model railroading, so forgive the dumb question: I'd like to run an HO train around the walls of my study --any kits available or advice re mounting, or should I just go to Home Depot and get some shelf brackets/0.5 inch plywood??

Replies to this thread are ordered from "oldest to newest". To reverse this order, click here.
To learn about more about sorting options, visit our FAQ page.

Posted by Anonymous

on Wed, Jun 29 2005 1:40 PM

I'd probably go with 3/4" plywood, as it'll increse the stiffness of the shelf, and smooth out any irregularities as you mount the brackets. I'd also plan on covering it with foam, either 1/2" or 1" foam sheets to aid in quieting the track the train runs around the room, otherwise it could be a bit noisey.

I was toying with doing this as well, but settled in taking over an entire room for the layout.

Mark in Utah

Posted by John Richards

on Fri, Jul 1 2005 9:24 AM

For my 5 cents {aust`} worth I would suggest a stiffener under the Plywood between the wall
brackets to reduce if not stop any sagging, as well, I would suggest generous curves at the
room corners to induce smoother running and less derailments.