Removeing trucks.

916 views

2 replies

Anonymous

Member since
April 2003
305,205 posts

Removeing trucks.

Posted by Anonymous on Tuesday, March 25, 2003 11:07 PM

I want to put one Kadee #27 coupler on the rear of my Life-like track cleaning car.
How does one get the truck off?

Reply
Edit

BentnoseWillie

Member since
January 2002
From: Nova Scotia
825 posts

Posted by BentnoseWillie on Wednesday, March 26, 2003 7:00 AM

I t hink the LifeLike trucks have a split prong cast into the truck frame, which snaps into a hole in the truck bolster. Some Model Power cars had a pin holding the truck on, but I'm sure that LifeLike always have used a cast-on prong.

Either way, if you pull the truck straight down firmly, but gently, it should come off. After converting the coupler, snap it back on.

B-Dubya -------------------------------------------------------------------------------- Inside every GE is an Alco trying to get out...apparently, through the exhaust stack!

dknelson

Member since
March 2002
From: Milwaukee WI (Fox Point)
11,439 posts

Posted by dknelson on Wednesday, March 26, 2003 8:06 AM

My experience is that over time the split prong fails if you remove the truck a few times. I plugged the hole with styrene rod, smoothed it, drilled a new hole and replaced the trucks with better ones held in place with a screw
Dave Nelson

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Model Railroader Newsletter See all

Sign up for our FREE e-newsletter and get model railroad news in your inbox!

Subscriber & Member Login

Removeing trucks.

Subscriber & Member Login

Users Online

Search the Community