Track fiddlerSounds like you had a memorable evening at your daughter's wedding up there. Memories are the best. I haven't been up to that area for probably 20 years. That was a grouse hunting trip and they were on the upcycle so it was a really good time. We used to go to Leech Lake quite frequently when I was a kid.
For the rehearsal, we were waiting for the pastor. He had never been to that lake. Finally I called him to find out if he was coming, and he said he was at Ten Mile Lake. I finally found out that he was at another lake named Ten Mile Lake three hours away.
York1 John
Good cloudy morning from the Eastern shore of the Pacific Rim.
The kids girlfriend stayed over last night and so my start to the day is delayed as they have set up shop in the guest room which is where my bike and layout are.
York1Brent, I had a huge container of coins a while back. I didn't roll them -- I was too lazy. I hauled them all down to the bank and they dumped them into their machine. It took the machine about 30 seconds for what would have take me hours. Thanks for the British Columbia hospitality this month.
John, I use to be able to do that as well, however, I was in two of my banks one morning last week and spent about an hour chit chatting in the managers office as he didn't have much going on. He told me most banks have rid themselves of the coin counter as they were expensive to maintain and took up a lot of room. He also said it never got used as people just don't use money any more. The bank did give me all the paper rollers I needed though. I find myself using Tap for everything now, even a cuppa at Tims. We have had Tap in Canada for years now.
I have always been happy with contractors we have hired but then again I really do my homework and price takes second over who it is I hire. Some of our friends and family have had very bad experiences hiring Mr. cheapo. I also never hire friends or family to do work for me. My policy is, never hire someone you aren't prepared to sue if need be.
Well best go have a third cup of coffee as I wait for those deadbeat children to get up. They are the hardest working kids I know so I don't really mind waiting. It has only been four days since University finnished and I got to see first hand how many hours they put in. They can take as long as they want to decompress.
Til later.
All the best to all.
Brent
"All of the world's problems are the result of the difference between how we think and how the world works."
York1 TF, you mentioned Leech Lake. There's a lake right south of there called Ten Mile Lake. My daughter got married on the shore of that lake. We stayed at a hotel on Leech Lake called Chase on the Lake. It was a nice place. I think I remember drinking quite a bit of beer that night.
TF, you mentioned Leech Lake. There's a lake right south of there called Ten Mile Lake. My daughter got married on the shore of that lake. We stayed at a hotel on Leech Lake called Chase on the Lake. It was a nice place. I think I remember drinking quite a bit of beer that night.
Hi John.
Sounds like you had a memorable evening at your daughter's wedding up there. Memories are the best.
I haven't been up to that area for probably 20 years. That was a grouse hunting trip and they were on the upcycle so it was a really good time. We used to go to Leech Lake quite frequently when I was a kid.
Speaking of memories, I remember my parents going all over the state looking to buy a resort. It was fun because we made a fishing trip out of it. Who could ever forget a town named Hackensack. I remember chuckling when I first heard it. I do believe they did look at a resort on Ten Mile Lake as it rings a bell. That sure was a lot of years ago.
TF
TF Sounds like you were exceptional. The constructor who finally fixed our house after the fire and all the mess was a real craftsman and did a fabulous job. The low point was before we found him we had to call the building inspectors on our own job.
GMTRacing TF We never had a problem with the mess and dust. Workmen leaving debris all over inside and out when they were "finished", yes. I always expected "broom clean" and sometimes had to say something.
TF We never had a problem with the mess and dust. Workmen leaving debris all over inside and out when they were "finished", yes. I always expected "broom clean" and sometimes had to say something.
Hi J.R.
We always conducted business in a professional manner. We installed Polly Shields with zippers on doorways to keep the dust down. We kept materials organized and neatly stacked and always cleaned up and swept every evening when we were done.
Still no matter what we did, construction is invasive and disrupts people's homes, it's just the nature of the business. The lady of the house generally burnt out before the Mr. Once in a while there were down-to-earth people that rolled with it well. I loved working for those people but it was few and far between. There usually was some point along the way where someone became somewhat agitated.
What was the worst was when they didn't even say anything but you could just sense it and feel it building
You are correct Mike. I didn't sit all the way through the presentation. I got uncomfortable when I noticed the DIY guys work looked a lot like mine. I only used screws though. I rarely use nails at all any more.
J.R.
Good morning. I'll have bacon, eggs, and black coffee. Same everyday.
A storm came through last night, and this morning it is cold and windy. It was a little difficult walking on the trail against the north wind. Some big trees didn't make it last night.
Ken, I know what you and Dirk mean. Our dog loves having us both here all day. It will kill her when we finally go on a trip again.
Brent, I had a huge container of coins a while back. I didn't roll them -- I was too lazy. I hauled them all down to the bank and they dumped them into their machine. It took the machine about 30 seconds for what would have take me hours. Thanks for the British Columbia hospitality this month.
Kevin, lots of work in your photos. I'm happy this is going on at your house and not mine. The best part is that you will have a great new place when you're all done.
Garry, you mentioned that there is a MR Facebook page. I hope I'm not missing too much there; I don't have Facebook. I may have to use my wife's account and take a look at it.
JR, I really like pictures of the layout. That's a neat idea of hiding the support beam with a building surrounding it.
Ed, that description of scrapple reminds me of some of the things my mother used to do. It was probably better I was outside playing while she was cooking.
Bear, It's probably cooling off there by now. I'm glad our long winter is over, although we're not getting out to enjoy spring yet.
I cut the grass yesterday, so there is not much going on today. Same old same old.
Hope everyone has a good day.
GMTRacing Can't imagine doing that many 2 x 4 sheets.
They didn't tape, like todays drywall, watch the video. The original gypsum board was a little different than todays drywall. It was heavier. Drywall is made using gypsum plaster.
Grandpa use to call it sheetrock.
TOP again?
Breakfast is served!
Mike.
My You Tube
Good Morning All,
I guess I am all done ordering scrapple at Crackerbarrel.
Until the fire and flood we had plaster and lath on our walls. Glad they came up with 4 x8 sheets since Eds video. The part I have the most trouble with is the tape and fill. Can't imagine doing that many 2 x 4 sheets.
Bear, bet it was good to get your self dirty again.
Mostly did "tidy up" last night. Started planning for the last of the backround area at the back of the balloon track. I will go with doing some type of compressed Sperry Rail Works instead of the gravel and aggregate buildings I already have. Sperry is a couple of miles from the yard but I will make it all fit.
backround building 2 by J.R. Mitchell, on Flickr
That's a rough idea of where it will go. The Sperry buildings are a long clerestory workshop and then a large office building adjacent. The latter will probably end up as a backround flat so I can have all the tracks to the complex represented.
All for now, back into the shop for now. Ciao, J.R.
Thanks Ed, er, not for the scrapple... but that plastering video was great. That's what my grandpa ( on mom's side) did, along with brick laying. He learned the trade when everything was wood lath strips. I still have his tools.
We have that on the interior walls of our early 40's cape cod, which was built by grandpa. His dad had a good sized masonry construction business, which employed all the men in the family, along with others.
The exterior walls of our house are brick on the outside, 4" block on the inside, with a 1" space between, laid up at the same time.
The interior surface of the block is covered with 3 coats of plaster. The little alcove in the video with the rounded corners is exactly what is over our bathtub.
I used to go to their jobs when I was a kid, and get yelled at for playing in the sand pile.
Good Morning!
How about starting the day off with a good helping of scrapple?
scrapple by Edmund, on Flickr
Plenty to go around
Yum!
Here's a fun look at the old gypsum lath, forerunner of sheet drywall:
You should enjoy this, Kevin
Cheers, Ed
"One difference between pessimists and optimists is that while pessimists are more often right, optimists have far more fun."
Howdy .
I just saw MR posted in Facebook about the upcoming June edition. My friend in Michigan, Dan Lewis, is having an article published about his N-scale layout featuring Milwaukee Road.
Ken ... Thanks for the belated birthday wishes for Shelley.
Brent .... Congratulations on your purchase of CP FP7's . The original CP paint scheme is very attractive.
My passneger station project is nearing completion.
Everybody: Have a nice night.
GARRY
HEARTLAND DIVISION, CB&Q RR
EVERYWHERE LOST; WE HUSTLE OUR CABOOSE FOR YOU
Kevin, when I cut through some concrete in our basement to move some plumbing, our air conditioner froze up. I forgot and the filters were clogged with the dust. Be sure to change your filters often!
Well Kevin.
I got to tell you I've had a lifetime of remodeling people's houses. They were always happy to see me when I finally showed up to do the job. The happy to see me and liking me seemed to fade a little bit more every day as I made progress and a mess of their house.
Not always but it was usually the same. By the middle of the job and almost all the way to the end they hated me.
It was always hard to get through all of that but in the end, with all the beautiful work, they always loved me.
I don't do big remodeling jobs anymore, like I said I had a lifetime of it and it came to the point where enough was enough.
I do know where you're coming from Kevin I'm confident in your hard work yourself and the work you've hired out. Your job will be just as beautiful in the end, just like mine always were
I have had a terribly messy three days.
I scraped all the popcorn ceiling texture in the garage. That made a tremendous mess. The guy came and retextured the ceiling yesterday and it looks pretty good now. I will start painting it tomorrow.
Moving everything from one side of the garage to the other, then back again, has been a huge pain. My main toolbox weighs 11,000 pounds, and it does not like to stop once it is moving, plus it has not moved in eight years. I crashed it into the wall right where the washer hook-ups are. Now I have another repair project.
Everything in the house is covered in tarps. It will be a few more days before all the tarps can be removed. The bathroom drains are being relocated right now.
I had to change the bathroom plans again. I originally planned to take 12 inches away from the bedroom that will become my wife's closet so we could have a 72 inch long tub. That wall has one stud that is load bearing for the short roof trusses that come in from the side of the house. The engineer came up with a plan that would add $3,000.00 to the job to move the wall. The trusses in the ceiling would need to be reenforced in place to become self-supporting.
With no income from work anymore, I decided we will leave the wall where it is.
The grand master bedroom suite is becoming less grand, but I do not want to go back to work.
There is so much dust... everywhere!
I cannot wait to get the house cleaned.
-Kevin
Living the dream.
Brent! You got the FP 7's I've never seen before, till your post a while back.... Sweet!
Make sure you post a picture of them on your layout when you get to it
Error, post deleted.
Good afternoon (late) from a cloudy West Coast.
Well, I took my heavy load of coins to the bank and was the only one in the place. I thought I would get the stink eye for hittin them with the kilo's of coins I was packin but they were happy to see someone and have something to do.
I then headed over to PWRS to do my parking lot drug train deal and get my two new FP7s. All the girls/ladies that work there are adorable just because they laugh at my attempt at humour when my own family only groans.
I got there at courier/Post Office P/U time and judging by the loads going into all the trucks, corona ain't hurting PWRS much if at all.
I need to unwrap the layout so I can take these babies for a spin. It is sealed to guard against construction dust, however that is on hold as we cannot get a shower pan. I watched the final episode of John Adams and I loved at how he balked at the artist rendition of history. So true whether it is through fictional writing or through an artist rendition of what really happened. If we could go back in time and witness what really was going on throughout history, the world would be a far different and less delusional place. Garry, the fire dept is also funded with other peoples money and like solar power both designed to try and save the planet and all her creatures. We have already had a bunch of local forest fires and it is still early days. Must be happy hour, I have no idea what kind of shape the bar is in, I'll find something. All the best to all.
I need to unwrap the layout so I can take these babies for a spin. It is sealed to guard against construction dust, however that is on hold as we cannot get a shower pan.
I watched the final episode of John Adams and I loved at how he balked at the artist rendition of history. So true whether it is through fictional writing or through an artist rendition of what really happened. If we could go back in time and witness what really was going on throughout history, the world would be a far different and less delusional place.
Garry, the fire dept is also funded with other peoples money and like solar power both designed to try and save the planet and all her creatures. We have already had a bunch of local forest fires and it is still early days.
Must be happy hour, I have no idea what kind of shape the bar is in, I'll find something.
Afternoon Diners
Flo, give the gang and I a please and Dirk half a dog treat.
Last few day's have been beautiful! Today it has gotton up to 80 degrees so I turned on the A/C in the garage for a few minutes.
Ankel / yard front. Ankel is doing much better and I got the front yard cut for the 3rd time this year? Ankel as a small amount of discomfrort I would rate it as a 1.
I know what started the Corona Virus Pandemic! Dog's! I am sure of it, they where just sick of there owner's leveing them for 8 to 10 hours a day, so they came up with this! Pretty sure Dirk Pip was the master mind behinde this caper. He has been to a park 13 days in a row, he is in doggie heaven!
Garry belated to Shelly (I hope it is Shelly) Sorry I have been all wrapped up in my own life.
Time to sit out with Dirk Pip.
Later, Ken and the Dirk say's Yes Daddy I was the master mind Woof, Woof!
I hate Rust
Good evening all
Rain day all day here and things are sure Greening up
My friend and condo manager that feeds me jobs around here is going to Remer Minnesota next to Leech Lake for a fishing trip. I'm both happy for him and envious at the same time whatever that feels like I told him to come back with a good fish story.
I've always had my best luck grouse hunting in Remer and hope to find some friends to go this fall. Although I look forward to something like that, I hope fall takes a long time to get here.
Terry, Congratulations on your retirement!!! I have a ways to go to catch up with you on that wonderful achievement but I sure am happy for you Taking on small jobs here and there to pick and choose sounds great. A little craftsmanship once in a while doesn't feel like work when you don't have to do it
Taco Tuesday for Judy and I tonight as we remembered the fixings on Saturdays grocery trip
Have a great evening everyone
Afternoon folks!
Heartland Division CB&QRay ..... Glad you are saving power. I think the costs up front for solar are high. Any government assistance to acaquire solar equipment is really other peoples money.
Yeah, but all infrastucture development is done (I would say) with all our money one way or another. (Without getting into politics) The grant was actually state funds that were given and administered through the power companies. There was a fairly complicated agreement that had to be signed and approved in order to get the grant. One item was that I had to agree to have them producing power for a fairly long period of time or I would have to pay the state back. Besides, I would say I was just getting back money I had already given to the state and for a change had some say in how it was spent.... The grant, I believe, helps all of us to benefit in terms of a better environment and does allow the utility to access more, cheaper, electric. If I produced more than I used in a year (or at the settle up time) I would get paid 3¢ per kWh... Whoopie! In some ways it ultimately saves tax dollars as it is cheaper to support rooftop or property solar than to build new dirty power plants or even pay for the total cost of solar or wind power development (which we all pay when we get electric bills)... At least that was the opinion of the state when I put up solar. So... "other peoples money"? I would say our money as a citizen. Also anyone can try to qualify to do the same thing as a citizen in my state. Just my 2¢.
73
Ray Seneca Lake, Ontario, and Western R.R. (S.L.O.&W.) in HO
We'll get there sooner or later!
Good morning, everyone.
Donuts! I haven't had any in weeks. Thanks, Steven!
I just finished cutting grass -- my most unfavorite thing I do. What's even worse is that I am surrounded by neighbors who do nothing all day but work on their yards. It makes my weedy lawn stand out even more.
I am finishing the log cabin of my dreams, except in my dreams it is a full scale one. In reality, the one I'm working on is N Scale.
Up until about five years ago, I still had dreams of owning a cabin in the woods somewhere. Reality and age set in, and that dream went out the window.
Have a good healthy day, everyone.
D O N U T S ....... ! ! ! ... .... Yummy ! ......... Thank you Steve O !
JR ...... Your tall building is very impressive. I like the station on a curve. ..... My platfoem does not have a shelter, and it is primarily a sheet of Evergreen plastic with grooves which I cut to fit around the curved track. My station is a small one.
Old Engine Man .... Thanks for sharing your experiences with us about Danbury.
Ray ..... Glad you are saving power. I think the costs up front for solar are high. Any government assistance to acaquire solar equipment is really other peoples money.
Terry ..... Great to hear you are considering a trip on the Rocky Mountaineer. We paid a lot extra for dome seating at the time. I don't know about their pricing now. I justified the extra cost because it was a once-in-a-lifetime trip. We flew to Vancouver, and we rented a car to see sights in that area. We spent 3 nights in Vancouver and two nights in Whistler. Our trip was in September 2002.
The train was slow as it was between freight trains in the mountains. That was okay becasue there was so much scenery to see. It took two full days with an overnight stay in a hotel in Kamloops. We spent a night in Calgary, and flew home from there.
I like the idea of taking the Empire Builder in one direction for your trip.
Everybody .... Have a nice day !
Good Tuesday morning, everyone. Later this week I'll be going in to the office for the first time in more than a month. Not everything we do on the magazine can be done electronically, it seems, and I've put this off for as long as I can.
There won't be enough people there to make it worthwhile to bring in donuts, so I'll give them to you instead.
Help yourselves.
So anyway, the end of the month is coming up. Where's the Diner going? California's nice this time of year, and they've done a good job flattening the curve.
--Steven Otte, Model Railroader senior associate editorsotte@kalmbach.com
All true and the whole thing is not even close to the original. The station is restored and a museum now and of course of the rest of it, the only thing left was the turntable and that had been buried. The freight house is my second attempt as the wood replica was a disaster. One needs to know ones limitations. As far as the rest of it is concerned, Armstrong Rubber in the backround was in West Haven, Miller Machine was in South Norwalk, Bekins was in Bridgeport and Hudson Wire was in Ossining, New York. that's a lot of selective compression but it fits the space I have.
You'd like the restored station though and Uncle Sam from the old Fairgrounds looks out of the parking lot now. J.R.
GMT wrote: "I used a Walthers kit for my curved platform."
That's Danbury station, eh...?
By the time I worked there, the canopies were gone. And your freight house should be wood, just like the old one! I spent a number of nights there, with coffee from the Holiday Diner just across the street...!
The sun is 35 degrees off the horizon and sinking on what was another beautiful warm day.
I was a deadbeat today as one tiny job lead to another, I did take the brakes and derailers off the kids BMX bike and serviced them all so I guess that is something.
Both kids finished their last assignments on Saturday so University is done. With limited jobs prospects they have sign up for the Summer taking three courses each from their perspective Universities. The kid is taking a movie industry course as well, with that industry shut down he has been talking to some of the directors he has become good friends with and they recommend he take the course.
They have also been doing some captioning for TV/movies as well. You can make decent $ if you can type like the wind with no mistakes which they can in both cases.
Terry, sounds like you have some good trips planned. Here's what you do, fly to Calgary take the Rocky Mountaineer to Vancouver, rent a car and drive down the coast where you can visit the kids and then board the Empir builder home. Your welcome.
I will probably go to PWRS and get my purchases tomorrow, they said I could come in the store but I will do the deal in the parking lot out front gangster style. May as well be safe as can be. It is paid for, so there is no reason to go in other than to drool at all the stuff on the shelves. I have the willpower to stay outside, I hope.
I got all my nickels, dimes and quarters rolled up finally, that was a big job considering that is the kind of thing I would do watching hockey. I had weighed the quarters and there were almost 19 kilos of quarters. I figured out how much money it was worth by weight and I was out by only 3 quarters in the end. I also had almost $300.00 in U.S. coins that I rolled as well. The total was just over $1600.00 in spare change. I have about 15 kilos of pennies I just don't think they are worth the effort. I will take it all to the bank tomorrow on the way to PWRS, I can't wait to see the stink eye I'm gonna get walking in with it all. I almost need a dolly.
I have been watching the Crave series "John Adams" it's not bad, I get a kick out of how much discussion there is in the show about the importance of international trade for the fledgling country to survive economically and think about the retoric we have to listen to today on the same subject.
The other # I ordered.
Good Evening All,
Just passing through. I'll have one of those beers please. Just one.
Finished up the good enough fubie backround building and placed it. Now I have to figure out what to do with the space in front of it. I have some previously built stuff like the gravel co. etc from Walthers but I also wanted to try to represent Sperry Rail (a Danbury Company up to last year). We shall see. Here is the building anyway.
backround building 3 by J.R. Mitchell, on Flickr
Garry I used a Walthers kit for my curved platform. I did leave off the platform part to better suit what I wanted but I cut the roof parts in half then angle cut the ends to suit the radius (Three foot radius +/- a bit. final sanded and glued it all up.
station 1 by J.R. Mitchell, on Flickr
I have since fixed the stone edging to fit better but the platform included the station foundation and the sidewalk surrounding it. I still need to take some of the shine off the shingles but I'll get there.
Time to sign off. Tomorrow is another day.