Good stuff Chris.
~G4
19 Years old, modeling the Cowlitz, Chehalis, and Cascade Railroad of Western Washington in 1927 in 6X6 feet.
It is very gratifying to see all the variety and nice images. Dave, your Enola Yard is developing very nicely. It should be another showpiece before too long, the rate you are going.
My image this weekend is of a (Lionel) UP Challenger departing Seneca Falls.
-Crandell
I have been working on two projects: Renumbering CR 8715 (ex Reading 1515), I still need handrails and headlight numbers. Also the truck sideframes need to be roller bearing (Des Plains Hobbies DPH 2006 for P2K). It was already sound equipped.
The other project is painting and adding a LokSound to an older ALCO Samhongsa SW. Reading 10 was on the property in 1937 and sent back to LaGrange for a rebuild/trade to SW 800m in 1956. The original 10 as shown has a Winton 201, sound file available from Litchfield Station. I do not see the Winton 201 on the LokSound site so I think this is custom. It sounds and runs great. The original ALCO Samhongsa had a nice can motor. It has a little gear noise but was worth the effort to have this little switcher that worked the industrial areas and waterfront in Philadelphia.
Hope you enjoy them both. Chris
Here's my work in progress Hudson (it was a BLI grab bag castoff) moving through my just completed grade crossing.
Same for me. That freight station I built on the early 60s was a Revell kit; I still have it
George In Midcoast Maine, 'bout halfway up the Rockland branch
Cox 47
Cox,
Where did you get that freight station, and how old is it? I swear I built the very same model back when I was about 10 years old. And that's saying it was a loooong time ago. It was my first introduction to the concept of model railroad scales,. The model is (or was in my case) HO scale and I built if for my American Flyer train set. Didn't quite look right for some reason....
I have figured out what is wrong with my brain! On the left side nothing works right, and on the right side there is nothing left!
Work on Enola Yard continues...
Modeling the Rio Grande Southern First District circa 1938-1946 in HOn3.
Nice work everyone!
I finally finished some of my project engines:
These are the newer atlas shells on the Kato drives. A little bit of cutting and filling and the shell fits just right. I used some styrene superglued to the frame to make the pad for mounting kadees, then drilled the holes for some screws I had in my parts drawer.
NCE-DASR decoders and LED lighting were also added.
Vincent
Wants: 1. high-quality, sound equipped, SD40-2s, C636s, C30-7s, and F-units in BN. As for ones that don't cost an arm and a leg, that's out of the question....
2. An end to the limited-production and other crap that makes models harder to get and more expensive.
Playing with the camera again. Santa Fe SD 40-2 heading to K-10 mill to pick up some hoppers.
One in Black and White for the old time look.
Hope to get some more work done this weekend. Have a problem turnout on a turn that is causing wheels to pick.
Cuda Ken
I hate Rust
Excellent work everyone! And it's only Friday night!!!
Unfortunately, I am once again down the shore, so I have nothing to share. I'm just here to drool again this week...
My Model Railroad: Tri State RailMy Photos on Flickr: FlickrMy Videos on Youtube: YoutubeMy Photos on RRPA: RR Picture Archives
">Installed insanely small grabs on Walther's Super Chief cars until my hands cramped and I could not hold my beer. Moved on to weathering some F89 flats and containers.
Started with an oil wash followed by an application of gouache and chalk then sealed with Dullcote. I then finished the trucks with rust and washes of grimy black and dust.
">
Grampys Trains Thanks, Mike. If you're referring to the "bottle brush", It depends on the way they are trimmed with scissors. DJ.
Thanks, Mike. If you're referring to the "bottle brush", It depends on the way they are trimmed with scissors. DJ.
alco's forever!!!!! Majoring in HO scale Minorig in O scale:)
We are off to a great start once again I see!
I haven't been doing much of anything photogenic this week. Just finishing some paperwork and waiting to see when my layout can be judged. In the meantime, I started assembling a Tichy Train Group Flat car. I had a box of 6 kits sitting on the shelf so I figured I would get one started.
The parts before assembly:
An almost completed car (still have a few more details to install) waiting to be painted. The shot also includes most of the tools needed to assemble the car. It is definitely not a "shake the Box" kit. It has a lot of very small parts and very fine details. It is very, very well manufactured and comes with excellent instructions. Everything fits where it should, parts are well marked, and no flash to trim or scrape off.
The top of the car:
Bottom detail (very nice brake detail that needs to be fit and installed):
Next step after adding a couple more grab irons is to go to the paint booth....
73
Ray Seneca Lake, Ontario, and Western R.R. (S.L.O.&W.) in HO
We'll get there sooner or later!
jeffrey-wimberly Got a somewhat decent shot of the fire chief's restored Galaxy 500 sitting next to the dept's beat up crew bus.
Got a somewhat decent shot of the fire chief's restored Galaxy 500 sitting next to the dept's beat up crew bus.
Not much can beat a big red Ford with a 427 under the hood. Welcome back, Jeffrey!
Bill
"Never try to teach a pig to sing. It wastes your time and annoys the pig"
Great
Grampys TrainsRobby, great job on the caboose conversion, and weathered boxcar.George, nice job on upgrading that passenger car.Garry, good job on your passenger car, and nice town scene.This flock of pigeons has Sparky's undivided attention.
Robby, great job on the caboose conversion, and weathered boxcar.
George, nice job on upgrading that passenger car.
Garry, good job on your passenger car, and nice town scene.
This flock of pigeons has Sparky's undivided attention.
North bound coal drag on the I&S with SW8 on a rainy afternoon...Jerry
Roco 6 dome tank on a better Athearn tank car under frame.
I finished building some ballast cars for my railroad. Each car was built out of the small Walthers ore cars. The cars are set up to function in a 2 to 4 car unit (only the cars on the ends have working couplers). Sometime I'll get around to building loads for them.
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
Choppers at Maryland Jct. Modified N scale Atlas models.
Lee
Route of the Alpha Jets www.wmrywesternlines.net
This is an Athearn Rib Side RBL, Removed the roofwalk, plugged the holes added A-Line Stirrup Steps and Walthers EOC Cushioning. Painted PC Green with Herald King Decals.
This is a Robbins Rails (Life Like) Car that came with a Details West Cushioned Underframe, added A-Line Stirrup Steps. Painted PC Green with Herald King Decals.
Rick
Rule 1: This is my railroad.
Rule 2: I make the rules.
Rule 3: Illuminating discussion of prototype history, equipment and operating practices is always welcome, but in the event of visitor-perceived anacronisms, detail descrepancies or operating errors, consult RULE 1!
Still building and weathering the many, many kits and RTR's I've accumulated over the last 20 years or so. The nice thing is that in this time of no jobs, SS checks not going far enough, etc., I still have lots of modeling to do now without having to spend any money.
Never hurts to "pick up a deal" and put it away for those "stormy" times.
Hope to have a pic or two next week of the old Model Diecasting Roundhouse 0-6-0T kit I've started.
Chuck
Grand River & Monongah Railroad and subsidiary Monongah Railway
Now I've ballasted the dual gauge turnouts at Silver Creek. Still missing the switch stand and more scenery.
But I'm content with my throw bar.
Wolfgang
Pueblo & Salt Lake RR
Come to us http://www.westportterminal.de my videos my blog
Nice scene and great weathering as always Robby
Simon I like the track level shot !
Here's a couple of fishing shots
TerryinTexas
See my Web Site Here
http://conewriversubdivision.yolasite.com/
Nice job on the caboose, great looking weathering as well
I have done nothing MRR related for weeks.
Here is a pic just to join in
Simon Modelling CB&Q and Wabash See my slowly evolving layout on my picturetrail site http://www.picturetrail.com/simontrains and our videos at http://www.youtube.com/user/MrCrispybake?feature=mhum
George .... The Coach Looks great! Bravo!
Robby .... The weathering look fantastic on the box car.
Below is my fictional GN "Plainesman" operating with running rights on my fictional divison of the Burlington. The observation car has lighted drumhead and marker lights, and (oops) I left a red wire visible in the window of the obs..
GARRY
HEARTLAND DIVISION, CB&Q RR
EVERYWHERE LOST; WE HUSTLE OUR CABOOSE FOR YOU