Trains.com

Scratch building a depot

6463 views
62 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2020
  • 1,622 posts
Scratch building a depot
Posted by pennytrains on Friday, January 26, 2024 7:28 PM

I decided I would start a thread for the little semi-scale depot I’m building from stuff around the house. It will be based on the Nickel Plate Road and Cincinnati Northern junction depot in Latty Ohio, just a little north and west of Lima and Wapakoneta. Here’s a link to the website with the reference photo I’m using:

https://www.west2k.com/ohpix/latty.jpg

Obviously I’ll be using some artistic license and more than a little selective compression. But my main criteria are as follows:

1. Don’t spend money on the project unless absolutely necessary.

2. Make everything possible from scratch including doors, windows, siding and shingles.

3. Structure needs to occupy the same footprint as a Plasticville Suburban Station.

So, what materials do I have available? 65 pound cardstock, the heavy card backings from watercolor paper pads, craft sticks including tongue depressors, popsicle sticks and coffee stir sticks, a few dowels in various sizes, scraps of clear plastic from packaging and a few fiddly bits.

After drafting the main walls on the heavy card, I cut them out and then cut the window and door openings using a cutting wheel in my Dremel.

 

After taking a break to remove the Christmas tree from my living room, I started experimenting with the one piece of the model I have never done before: creating convincing dimensional siding from strips of cardstock. I went with 2 layers of 65 pound card and the overall effect is pretty good.

 

To do this I first measured 3 segments 1/8 of an inch wide and drew the lines. 1 for scoring, the next for placement of the next slat, and the third line for cutting. This allows an overlap from one slat to the next and will keep the entire section of siding connected.

This building will have 2 other completely different kinds of siding so I’ll keep you updated as I experiment with those. In case you’re wondering, it will most likely have grey walls, white trim and a green roof.

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    January 2019
  • From: Henrico, VA
  • 9,728 posts
Posted by Flintlock76 on Friday, January 26, 2024 9:16 PM

Oh, this is gonna be gooooood...   Big Smile

  • Member since
    June 2013
  • 637 posts
Posted by smokey1 on Friday, January 26, 2024 11:34 PM

I agree. 

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Saturday, January 27, 2024 7:24 PM

Drawing up some siding.  Going from left to right, a "board" is a fold under piece to be glued to the back side of the next 1/8" strip.  Therefore the third strip just to the left of the darker (cut) lines is the double thick facing of the board.

 If that makes sense Wink

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Saturday, January 27, 2024 8:21 PM

After lightly scoring the fold lines, I used a straight edge as a bending brake and pinched the fold along the metal edge:

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Saturday, January 27, 2024 8:57 PM

Cut, folded and ready for gluing, the fate of the project comes down to this pile of paper:

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Sunday, January 28, 2024 11:35 AM

Strips are 8 1/2" long so I only get 9 boards for this 3/4" wide wall.

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Sunday, January 28, 2024 1:26 PM

I'm going to go ahead and call that part of the experiment a success.  It has the sawtooth profile I want but not high enough to cause a problem with the trim pieces that will go on top of the siding.

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Saturday, February 3, 2024 12:45 PM

On to the wainscoting:

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Saturday, February 3, 2024 12:59 PM

The trim and paint should cover some imperfections Wink

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Saturday, February 3, 2024 5:25 PM

When paper gets this thick it can be sanded, carved otherwise cleaned up using almost the same techniques you would use with balsa.

Of course I don't actually HAVE to remove my gluey fingerprints from the walls.  I could just say it's a new advanced weathering technique Wink

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Saturday, February 3, 2024 9:59 PM

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Wednesday, February 7, 2024 5:28 PM

The idea of painting a light color under the dark part and a dark shade under the white part was an attempt at creating grain texture and weathering.  It worked mildly well under the white wainscoting but on the main part of the walls it didn't help.

So I've moved on to the window trims.  The main trim pieces are 3 layers thick and the headers are 6 layers.

All measured and drawn individually of course.

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    February 2018
  • From: Flyover Country
  • 5,557 posts
Posted by York1 on Wednesday, February 7, 2024 5:47 PM

Thanks for posting photos of your work!  Very neat!

York1 John       

  • Member since
    January 2009
  • 1,986 posts
Posted by 8ntruck on Wednesday, February 7, 2024 10:29 PM

The lighter color under the darker color might work better if you thinned the darker paint some.  The thinned darker color would not cover as well, maybe giving you the effect you are looking for.

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Thursday, February 8, 2024 2:12 PM

Part of my problem is that I'm not 100% sold on the idea of weathering to begin with.  Considering the fact that I won't weather the trains I'm going to have to tread the thin line between reality and toy.  Wink. So elements of both worlds are necessary.

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Thursday, February 8, 2024 2:16 PM

It looks good on the wainscoting but the blue gray siding looks better with a full coat of paint:

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Friday, February 9, 2024 1:16 PM

The wall on top left faces the track.  The blank areas are for the bay window.  The next step is to measure, cut and install narrow strips of cardstock inside the window, door and transom openings.  The window panes and doors will be separate pieces.

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Friday, February 9, 2024 1:42 PM

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    January 2009
  • 1,986 posts
Posted by 8ntruck on Friday, February 9, 2024 10:34 PM

Have you ever heard of a balsa stripper?  It is a tool to cut small stripes of balsa from a sheet.  I was using mine to make 1/32" square stringers for stick and tissue airplanes I used to build.

They are adjustable for cutting width and use an Xacto knife blade.  I'll bet it would be helpful for your current project.

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Sunday, February 11, 2024 9:44 PM

After installing the doors I decided to go ahead and raise the building so now it's starting to look like something Wink

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Monday, February 12, 2024 12:36 PM

This is my paper cutter.  It's reasonably accurate but I still need to measure and draw the lines before I cut to make sure the blade actually goes in a straight line.

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Monday, February 12, 2024 6:24 PM

Another one of my favorite tools is a glue runner.  It has a strip inside that drops little dots on the paper and makes large area laminations fast and easy.

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Tuesday, February 13, 2024 1:31 PM

Plotting the bay window.

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Tuesday, February 13, 2024 2:44 PM

Looking at the prototype photo, you'll see that the bay window wall extends all the way to the roof on the end of the depot, but has a flat roof on the side that faces the track.

Since I'm not too great at the math, how do I calculate the length of a wall section that's protruding at a 45 degree angle away from the wall to a point that's at a lower height than the end that connects to the flat wall?

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Tuesday, February 13, 2024 5:55 PM

Well I THINK I got it Hmm

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    January 2009
  • 1,986 posts
Posted by 8ntruck on Tuesday, February 13, 2024 11:07 PM

Sure looks to me like you got it.  

You get the width of the sides of the bay windows for the bay windows from the top view, and the height of the edges of the bay windows from the side view of the end  of the building.

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Thursday, February 15, 2024 6:29 PM

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    January 2009
  • 1,986 posts
Posted by 8ntruck on Thursday, February 15, 2024 11:38 PM

Looks great!  Going to be cedar shingles?

  • Member since
    July 2020
  • 1,622 posts
Posted by pennytrains on Friday, February 16, 2024 9:14 PM

I think I'm going to go with green rolled roofing.  I'll do some experiments but I read about using masking tape as the roofing material and I'm going to give it a try on scrap.  The masking tape I have leaves a lot to be desired so I'm not sure if it will even stick permanently let alone take the paint.

Basically I'm using a modified Nickel Plate paint scheme with a darker gray than what is considered "true NKP practice".  At least compared to what I've seen in the NKPHTS Modeller's Notebook issues I downloaded from NKPHTS.org.

Big Smile  Same me, different spelling!  Big Smile

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month