Trains.com

The 312 project

6638 views
102 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Friday, April 19, 2019 7:41 PM

 It turns out the 282 motor does smoke after all...

  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Tuesday, April 16, 2019 5:51 PM

So, I'm making a list. Most things seem to be cosmetic.

 

....to be continued....

  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Tuesday, April 16, 2019 5:46 PM

The problem with the front end :

 

 

the pilot has has a slight bend, but the mounting tongue for the pilot, which is on the front of the cylinder cast ing, is cracked and has a severe bend. Both will need to be replaced.

  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Tuesday, April 16, 2019 5:38 PM

Cleaned and lubed the 312's motor, and put it back in the shell.

 

 

 some prior owner put Lionel whistle brushes in her, but they are working great, so I left them in. The motor runs great !!! Very loud chuffing sound, gonna have a lot of fun with this one.

  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Tuesday, April 16, 2019 5:28 PM

Cleaned and lubed the 282:

 

 

 motor runs well, light comes on, no smoke however. Have not tested the reverser yet. I didn't realize this has a plastic boiler shell, looks great, though.

  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Saturday, April 13, 2019 7:22 PM

Thank you, that helps ! 

I can see some of the parts I'll need in those pictures already.

Just have to do the work,

Thanks so much !

  • Member since
    September 2010
  • From: Parma Heights Ohio
  • 3,442 posts
Posted by Penny Trains on Saturday, April 13, 2019 6:30 PM

Trains, trains, wonderful trains.  The more you get, the more you toot!  Big Smile

  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Saturday, April 13, 2019 4:42 PM

Thank you for the great advice !

I'll need to go through these and determine what is needed. The 312 has a bent pilot, but it appears to be a separate casting from the frame, so if it can't be straightened, I'll need a replacement part. I haven't gotten into the mechanisms yet, don't know what I'll find.

It'll be great to see them run again !

  • Member since
    January 2012
  • 301 posts
Posted by rrswede on Saturday, April 13, 2019 3:47 PM

You are correct. Getting the "oldies" running is a lot of fun.

As for parts, give Doug at Port Lines a call. www.portlines.com

Jeff Kane at http://ttender.com/ also carries some parts.

swede

  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Saturday, April 13, 2019 1:54 PM

 Gonna have fun rebuilding them. They will roll out of the shop with knuckle couplers. This brings the Flyer roster to 6.

  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Saturday, April 13, 2019 1:50 PM

 Here's a side by side with HO brass K-5's from Westside, circa 1972

  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Saturday, April 13, 2019 1:46 PM

 If anyone knows a good source for Flyer parts, please Shout Out !

  • Member since
    November 2011
  • 2,071 posts
Posted by Postwar Paul on Saturday, April 13, 2019 1:43 PM

 But fixing these old trains is half the fun, isn't it ?

  • Member since
    November 2011
  • 2,071 posts
The 312 project
Posted by Postwar Paul on Saturday, April 13, 2019 1:40 PM

New additions to the tribe :

 

a 282 and a 312, both in " fixer upper" condition 

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month