Trains.com

Milk car problem

6061 views
35 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Saturday, April 24, 2004 9:44 PM
Congratulations on working out your problem, Jerry. I'm looking forward to working with the good doctor on obtaining some accessories too.

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, April 24, 2004 6:17 PM
Elliot, do you happen to have any accesories laying around? If you do, which ones, what would you offer?[;)] I heard you were "cleaning up"[:D].
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Saturday, April 24, 2004 11:03 AM
Thanks for your generous offer Doctor. I'm pretty well set for trains and accesories. Most people don't realize that I was the one who was responsible for the display at the Mall of America 11 years ago. I have more stuff than I know what to do with!! In this case I saw that Jerry neded more power and it was easy to jump in and help out. For me it is one less thing cluttering up my basement, for Jerry it's a big deal. Sort of a win-win situation, and it made me feel good to do it. [swg]

P.S. this is my 1600th post
  • Member since
    January 2014
  • 248 posts
Posted by Dr.Fu-Manchu on Saturday, April 24, 2004 12:42 AM
The [}:)] Doctor is in!!! Jerry, Glad Elliot was able to help you. If I had known you were power poor, I would have sold you the LW I have just to have saved problems. It just goes to show that older is sometimes better! Elliot, I owe you one, not sure what or when.But, when you are looking for a Post-War accessory, Let me know and if I have one to sell, It's yours at NO COST!!! Because what goes around, comes around!
Untill Next Missive, I Remain The Humble, Yet [}:)] Doctor!!!
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Thursday, April 22, 2004 8:44 PM
Glad that you got everything working!

That 100 watts should do you well for a while.
Ben TCA 09-63474
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Thursday, April 22, 2004 6:16 PM
You're Very Welcome Jerry, My pleasure!!!![:D]
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, April 22, 2004 4:52 PM
YES!!! I just got it today, wired it, and the milk car WORKS!!!!![:D][:D][^][(-D][(-D]

Thank you, Thank you Elliot!!!

This 100wt rocks![8D]
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, April 21, 2004 11:54 AM
ben,
that makes sense, i should have thought of that. the jugs dont fly out at 25 watts either! so... who wants to ask lionel to make a 25 watt 20 ampere transformer[:-^] [(-D]

i went back to check the current draw after reading your previous post and the volts read 12~13 volts and the amp draw was to wild and variable to read (i only have a simpson analog meter) but it was near 6.5~7.5 amps after holding the button for a sec.

seems like a lot of current to me[%-)]
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Wednesday, April 21, 2004 7:54 AM
Actually Ben, what you have set up there is way more than I have right now. WHATEVER WORKS!!!![tup][tup][bow][swg]
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, April 20, 2004 8:50 PM
Looks like your layout is outside Ben.

pax[:O]
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Tuesday, April 20, 2004 8:34 PM
QUOTE: Thanks to our friend Ben and his secret laboratory


Hardly a secret lab, Big Boy

More like the control panel to my secret floor layout with a cheap clamp-on Radio Shack analog ammeter[:)]

Ben TCA 09-63474
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Tuesday, April 20, 2004 7:54 PM
Woodsytc,
I think that the reason you old 25 watter could power the milk car is because of the type of breaker(or lack thereof).

The modern Lionel 40 watter has an extremely fast acting electronic circuit breaker that will trip within a second if it goes over the rated amperage even slightly, such as when accelerating the small motor in the #50 gang car.

Many of Lionel's older transformers under 60 amps or so didn't have a breaker at all. The ones that did had what's called a thermal breaker, which relies on the heat generated from the current passing through it to trip when the rated current is exceeded. I believe that if the trip current of a thermal breaker is exceeded by 1/2 amp, it can take is as long as 30 minutes to close. A dead short on your track will often exceed 30 amps, and a 5 amp thermal breaker will take as much as 6 seconds to trip with this much overcurrent. This is probably why your milk car will work on the old 25 watter, as the excess current isn't being drawn long enough to trip the breaker if present.
Ben TCA 09-63474
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Tuesday, April 20, 2004 7:07 PM
No Jerry, actually that's Lionel's stuff from the 60's. Rocket launchers, military, exploding box cars, and the like. I was just teasing your little transformer a bit there, about how that "old brute" is going to power up your milk car. Have you seen any of that stuff at shows?? Very silly, but fun!!![swg]
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, April 20, 2004 6:13 PM
[(-D][(-D][(-D][(-D][(-D]

Thats how you know if you have ENOUGH power. Lanching cans, hee,hee,hee[:-,]

3...2...1... BLASTOFF!!!
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Tuesday, April 20, 2004 1:58 PM
Doctor, you're quite welcome. Solving problems is what I live for. I could tell right away that behind that [}:)] mask, there really was a good guy. I said to myself, why would you sell him a dud? And I could only come to one conclusion, YOU WOULDN'T!! and you didn't. There must be OTHER[}:)] FORCES AT WORK!!!! Thanks to our friend Ben and his secret laboratory we were able to identify and thwart these forces.[;)]

I just returned from the post office, and that old type "R" is on it's way to our young friend. I suspect that by the weekend we will be hearing reports small silver objects being flung into orbit. [swg]
  • Member since
    January 2014
  • 248 posts
Posted by Dr.Fu-Manchu on Tuesday, April 20, 2004 12:40 PM
The [}:)] Doctor is in!!! Elliot, The Doctor is greatful to you in assisting young master
jerry. His little power pack was not up to the task asked of it. I am still going to find
him a larger transformer(can never have too much power) Because I want to keep a
customer happy!
Untill Next Missive, I Remain The Humble, Yet [}:)] Doctor!!!
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, April 20, 2004 7:12 AM
just to be double sure, clean or re-clean the UCS rails and the milk car pickup sliders. i just ran my milker with a 25watt OLD lionel transformer and it worked ok. (the cans didn't come flying out either at 25 watts) about 1 in 3 needed a second push but it was working as well as it usually does (and it gave me an excuse to unpack it and run it again)

good luck,
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Tuesday, April 20, 2004 6:26 AM
Relax Dr, I've got you covered. I figured out the problem, and Ben confirmed my suspicions by testing his milk car. I'm sending Jerry an old "R" which will give him the POWER to get the milk.

GOT JUICE?

[:D][(-D][(-D][(-D][swg]
  • Member since
    January 2014
  • 248 posts
Posted by Dr.Fu-Manchu on Tuesday, April 20, 2004 3:43 AM
Jerry, The [}:)] Doctor is in!!! First: If you had a problem, Why did you not e-mail me!!!!!
As I said on our phone chat, The Milk Car might need a tad more current that your
present transformer can handle. As to testing: I use a LW Transformer for tests. The
KW is the Main Layout power(till I need a ZW). I told you If I can get a good deal on a
bigger transformer, I will pass it along to you. At any rate, I hope you are happy with the
items and if any problems come up, Let me know ASAP!!!! DON'T MAKE ME COME
AFTER YOU!!!!! I have been known to tourture people for less. Till next missive, I Remain The Humble, Yet [}:)] Doctor!!!!
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, April 18, 2004 6:11 AM
So, the confirmation is recieved, i guess i do need a bigger transformer after all![:D]

I guess ill have to just play with my cattle for now..[;)]
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Saturday, April 17, 2004 9:59 PM
Just measured, and my 3472 pulls just over 4 amps when activated.

If I remember correctly, the modern Lionel starter set 40 watter is rated at 3 amps, and has an extremely fast acting circuit breaker. 4 amps applied within two seconds would likely cause the breaker to trip. I know that mine would trip if I used too heavy of a hand on the throttle when running the #50 gang car, if that gives you any idea of the current limit.
Ben TCA 09-63474
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, April 17, 2004 9:49 PM
no not in the area. i only have on transformer, the darn 40watt. i guess it isa power problem after all. whew! now ill have to start saving $$$ for a bigger transformer. perhaps a kw would be good? time to go on ebay snd train shows to hunt again!!![:D]

got to go to bed, and read a happy (MTH catologue) bedtime story.

good night[zzz]
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Saturday, April 17, 2004 9:18 PM
Jerry, do you have a place with a test track or a friend with a larger transformer that you could take it to and try it, to test this theory?
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Saturday, April 17, 2004 9:17 PM
If this is one of the starter set transformers, the breaker is extremely fast acting.

If the current goes over 3 amps or so, the breaker will trip within a second, and it's entirely possible that your milk car is drawing this much. If I get a chance to tomorrow, I'll measure the current draw on my 3472, as well as try it on a 40 watt starter set transformer.
Ben TCA 09-63474
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Saturday, April 17, 2004 9:05 PM
I don't know, but the part number seems to be 3472-37, if you want to search the web.

I think it would be a good idea first to try a larger transformer, if you can find one, just in case yours is too small. Maybe Manchu will see this thread and have some ideas.

It is entirely possible that a big enough transformer could make a car with a shorted turn operate properly.

Bob Nelson

  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Saturday, April 17, 2004 9:03 PM
I would like to think that the good doctor had tested this car before selling it to you Jerry. From the past conversation, and the fact that the cattle car works, I have every reason to believe that he did. But, I'll bet he used a much larger transformer when he did. Why not drop him an email and ask? I'm looking for reasons why it worked for him and not for you.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, April 17, 2004 8:56 PM
whoa, a dead[xx(] solonoid on a postwar milk car, this is a rarity!!!
how much would you estimate a new one to be?
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Saturday, April 17, 2004 8:54 PM
It could be a shorted turn or turns in the solenoid. That would explain why you see a little action before the circuit breaker trips. About the only way to verify this is to replace the solenoid, although you might be able to measure a reduction in the coil's resistance, which you could compare to the resistance of a good solenoid, if someone could measure that. (I can't, since I don't have one of these cars.)

The cleaner won't help the solenoid at all. It is for cleaning switch contacts.

I doubt that the mechanical parts would have any effect on the amount of current drawn.

Bob Nelson

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, April 17, 2004 8:54 PM
before i lubed it, no. i put some vaseline on the plate and it moved freely. yeah, i was having zw on the brain after i was troubleshooting. hmmm...

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month