Trains.com

Heartland Flyer crossing accident

2574 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2009
  • From: Dallas, TX
  • 6,952 posts
Posted by CMStPnP on Sunday, October 17, 2021 11:53 PM

MidlandMike

Probably good that there is an engine at both ends of the train.  I can't imagine what would have happened to a cab-car.

Amtrak keeps spare equipment at the Fort Worth terminal, usually a spare locomotive and a spare Superliner Coach or Sleeper or both.    So if the locomotive were not on the other end of this train it would just be sitting parked in Fort Worth, TX.    In my view makes sense to use it vs turning the train which they used to do.

  • Member since
    August 2006
  • 575 posts
Posted by alphas on Sunday, October 17, 2021 12:36 PM

There were 110 passengers on board so the train is being used.    There were 4 injuries among the passengers but no mention of their extent.

  • Member since
    January 2002
  • From: Canterlot
  • 9,575 posts
Posted by zugmann on Sunday, October 17, 2021 12:18 PM

At least one on the one side.  Looks like the back of one on the other (if they were still there). 

https://goo.gl/maps/v9kgAc8s68AoAzoh8

It's been fun.  But it isn't much fun anymore.   Signing off for now. 


  

The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any

  • Member since
    December 2001
  • From: Denver / La Junta
  • 10,820 posts
Posted by mudchicken on Sunday, October 17, 2021 10:21 AM

Balt is correct. At minimum, the train whistles for the crossing at a minimum of 1320 ft. (1/4 mile) out from the crossing and that increases as the speed increases.(whistle posts and gate circuits move further out as the speed increases.)....Oddly the FRA record says "20 Second Warning" instead of the normal 30. 

(1) Another violation of the joint AASHTO/AREMA rule on approach grades to grade crossings. The road agency will have fun explaining why the approach grades (their responsibility) were so bad.

(wonder if the road signage even had the humped crossing warning yellow W10-5 diamond sign?) 

(2) Was there any attempt to call the 800 number on the blue ENS panic number sign? (irony here is is I watched OLI reps in Colorado "sell" the safety lesson about ENS signs in Colorado yesterday for four hours to people that were mostly ignorant that the sign even exists. Hope OLI gets the rights to that video)`

020-687A Addington Bend Rd (north of town on BNSF) has a history with high centered trucks. Add one more.

Mudchicken Nothing is worth taking the risk of losing a life over. Come home tonight in the same condition that you left home this morning in. Safety begins with ME.... cinscocom-west
  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Sunday, October 17, 2021 8:10 AM

Lithonia Operator
Yes, great that it wasn't a cab car.

I'm sure it has to do with not wanting to turn a single engine. But it seems ridiculous to have two units on a two-car train.

That one SUV really flew. I wonder how much time there usually is from when the signals start flashing to when the train arrives. I don't know if the train was in emergency or not; it was still going quite fast at impact.

I 'believe' the FRA requires crossing protection to begin activation 30 seconds prior to the time the train enters the crossing. I have no idea what the sight lines for the Engineer in this situation were.  In many geographical configurations road crossings aren't visible to the train crew until it is much to late to take any form of evasive actions (putting train into emergency prior to impact).

Never too old to have a happy childhood!

              

  • Member since
    December 2017
  • 2,671 posts
Posted by Lithonia Operator on Saturday, October 16, 2021 11:09 PM

Yes, great that it wasn't a cab car.

I'm sure it has to do with not wanting to turn a single engine. But it seems ridiculous to have two units on a two-car train.

That one SUV really flew. I wonder how much time there usually is from when the signals start flashing to when the train arrives. I don't know if the train was in emergency or not; it was still going quite fast at impact.

Still in training.


  • Member since
    June 2011
  • 1,002 posts
Posted by NP Eddie on Saturday, October 16, 2021 10:45 PM

Midland Mike:

You are correct that the cab car and its engineer would not have fared well.

Are there two locomotives on this train so it does get turned at OKC?

Ed Burns, retired class 1 since 2004.

  • Member since
    September 2011
  • 6,449 posts
Posted by MidlandMike on Saturday, October 16, 2021 9:36 PM

Probably good that there is an engine at both ends of the train.  I can't imagine what would have happened to a cab-car.

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Saturday, October 16, 2021 8:39 PM

Never too old to have a happy childhood!

              

  • Member since
    June 2009
  • From: Dallas, TX
  • 6,952 posts
Posted by CMStPnP on Saturday, October 16, 2021 3:55 PM

More than one van.    Just amazes me this even happened because you can see on approach to the crossing the grade up to it is rather steep and since the RR roadbed is raised.    Fairly reasonable to expect there is a steep descent on the other side.

https://www.youtube.com/watch?v=03NkGLVbQLA

 

 

  • Member since
    June 2011
  • 1,002 posts
Heartland Flyer crossing accident
Posted by NP Eddie on Saturday, October 16, 2021 11:43 AM

ALL:

Train Orders.com has a video of the Heartland Flyer hitting a hungup auto carrier in Oklahoma. The one van on the trailer went flying! The auto carrier trailers are close to the ground and get stuck easily. Any damage to the lead loco and cars?

Ed Burns

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy