Trains.com

Acela-2s here they come ?

2889 views
21 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2007
  • From: Georgia USA SW of Atlanta
  • 11,919 posts
Acela-2s here they come ?
Posted by blue streak 1 on Friday, August 26, 2016 2:59 PM

Interesting video from Alstom and note they can have additional cars added.

https://www.youtube.com/watch?v=WH-3FsmU6KQ&feature=youtu.be

 

  • Member since
    December 2007
  • From: Georgia USA SW of Atlanta
  • 11,919 posts
Posted by blue streak 1 on Friday, August 26, 2016 4:37 PM

Amtrak release.  One item trains will not be EMUs but power cars at each end just like present Acela-1s.  One still seems to show that each car will share a wheelset on each end to the next car.

http://media.amtrak.com/2016/08/1610/

 

  • Member since
    December 2007
  • From: Georgia USA SW of Atlanta
  • 11,919 posts
Posted by blue streak 1 on Friday, August 26, 2016 4:48 PM
  • Member since
    December 2007
  • From: Georgia USA SW of Atlanta
  • 11,919 posts
Posted by blue streak 1 on Friday, August 26, 2016 5:06 PM

Alstom release/

http://www.alstom.com/press-centre/2016/8/alstom-to-provide-amtrak-with-its-new-generation-of-high-speed-train/

There were some complaints with Alstom's new math.  The best can figure is each train set will carry 33% more passengers but with 28 new train sets verses present 20 train sets that will be 40 % increase in total train sets.  Will that  give Amtrak approximately 80% total new seats ?

 

RME
  • Member since
    March 2016
  • 2,073 posts
Posted by RME on Friday, August 26, 2016 5:43 PM

blue streak 1
Interesting video from Alstom and note they can have additional cars added.

https://www.youtube.com/watch?v=WH-3FsmU6KQ&feature=youtu.be

Nice to see that all the characters from the old iPod commercials have new employment.

Not so nice to see that by the time these trains are in service they'll still be running over the old Portal Bridge, and through the old Hudson tunnels...

  • Member since
    January 2002
  • From: Canterlot
  • 9,575 posts
Posted by zugmann on Friday, August 26, 2016 7:28 PM

I like the white leather(?) seats.  Oh yeah, they'll stay clean for 5 minutes.

 

I have white and black leather seats in my one truck.  Even trying to keep them clean - it's a losing battle unless, you know, you don't sit on them.

It's been fun.  But it isn't much fun anymore.   Signing off for now. 


  

The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Friday, August 26, 2016 7:39 PM

zugmann
I like the white leather(?) seats.  Oh yeah, they'll stay clean for 5 minutes. 

I have white and black leather seats in my one truck.  Even trying to keep them clean - it's a losing battle unless, you know, you don't sit on them.

But all the people seem to be pastey white.....

Never too old to have a happy childhood!

              

  • Member since
    January 2002
  • From: Canterlot
  • 9,575 posts
Posted by zugmann on Friday, August 26, 2016 7:58 PM

BaltACD
But all the people seem to be pastey white.....

Train of the damned.

 

It's been fun.  But it isn't much fun anymore.   Signing off for now. 


  

The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any

  • Member since
    July 2004
  • 2,741 posts
Posted by Paul Milenkovic on Friday, August 26, 2016 9:05 PM

So these things are going to tilt?

Will the tilt work out better than the last time, where they had to restrict it on account of the "loading gauge"?

If GM "killed the electric car", what am I doing standing next to an EV-1, a half a block from the WSOR tracks?

  • Member since
    September 2010
  • From: East Coast
  • 1,199 posts
Posted by D.Carleton on Friday, August 26, 2016 9:45 PM

Twenty years ago at a shindig in Fort Lauderdale we celebrated the announcements of the American Flyer for the northeast and the Florida Overland eXpress (FOX). The former was later rebranded Acela and was built in tandem with the writing of the Tier 2 crash standards which was akin to nailing jello to a tree and we all know how that turned out. Meanwhile we are watching Brightline being built for south and central Florida. Funny what can happen in two decades.

Editor Emeritus, This Week at Amtrak

  • Member since
    June 2003
  • From: South Central,Ks
  • 7,170 posts
Posted by samfp1943 on Saturday, August 27, 2016 4:31 AM

These new trains look pretty 'sexy' but no where is there any mention of the time line to when they will be in regular service.   You can bet Alstom will want to be paid some of that $2.4 billion, prety quickly....

Question #2:  Will all those 'needed' improvements to the NEC physical plant, and ROW be ready so these new trains will be able to preform at their maximum limits of their specifications, on their first day, on the job?

Should be interesting....Whistling

 

 

 


 

  • Member since
    July 2006
  • 9,610 posts
Posted by schlimm on Wednesday, August 31, 2016 10:46 AM

Paul Milenkovic

So these things are going to tilt?

Will the tilt work out better than the last time, where they had to restrict it on account of the "loading gauge"?

 

Paul: I may be wrong, but didn't your Dad have an involvement with the United Technology's Turbo Trains?   Didn't they tilt?

C&NW, CA&E, MILW, CGW and IC fan

RME
  • Member since
    March 2016
  • 2,073 posts
Posted by RME on Wednesday, August 31, 2016 12:44 PM

schlimm
United Technology's Turbo Trains?  Didn't they tilt?

I look forward to hearing Prof. Milenkovic's stories ... but Cripe's TurboTrain used passive, or pendulum, tilt, not the active or proportional systems that are now characterized by the name.  If I remember correctly, Prof. Milenkovic has a special interest and competence in the kind of mechanical linkage that was used to permit the train to tilt, guide, and steer simultaneously with only single axles between cars -- it's far from simple and highly interesting.

  • Member since
    March 2016
  • 1,568 posts
Posted by CandOforprogress2 on Wednesday, August 31, 2016 2:47 PM

Boy these are Butt Ugly. The Bulldog nose has to go.

  • Member since
    August 2005
  • From: At the Crossroads of the West
  • 11,013 posts
Posted by Deggesty on Wednesday, August 31, 2016 3:07 PM

CandOforprogress2

Boy these are Butt Ugly. The Bulldog nose has to go.

 

I'm sure it will go fast.Smile

Johnny

  • Member since
    November 2009
  • 422 posts
Posted by Dragoman on Wednesday, August 31, 2016 7:37 PM

RME

 

 
schlimm
United Technology's Turbo Trains?  Didn't they tilt?

 

I look forward to hearing Prof. Milenkovic's stories ... but Cripe's TurboTrain used passive, or pendulum, tilt, not the active or proportional systems that are now characterized by the name. 

 

 

Talgo, a major player in tilting-train technology, also uses a passive tilt system (related to Cripe's?), and extols its virtues (lighter, no energy consumptionn , less complicated mechanisms to go wrong).

 

  • Member since
    November 2009
  • 422 posts
Posted by Dragoman on Wednesday, August 31, 2016 7:39 PM

And, I too would love to hear more of the good professor's stories -- familial, historic, and otherwise -- about the TurboTrain!

  • Member since
    November 2013
  • 1,097 posts
Posted by Buslist on Thursday, September 1, 2016 8:55 AM

Paul Milenkovic

So these things are going to tilt?

Will the tilt work out better than the last time, where they had to restrict it on account of the "loading gauge"?

 

The issue wasn't the tilt that was the problem it was that the cars were too wide to use the tilt on the restricted loading gauge of the former NH Metro North territory. To be able to use the tilt on the new train sets the cars will need to be narrower or big $ spend to open up the loading gauge, moving wayside structures, changing track centers etc.

  • Member since
    September 2008
  • 1,112 posts
Posted by aegrotatio on Thursday, September 1, 2016 2:05 PM

Paul Milenkovic

So these things are going to tilt?

Will the tilt work out better than the last time, where they had to restrict it on account of the "loading gauge"?

 

 

This myth was debunked years ago.  It's just not true.

 

  • Member since
    January 2014
  • 202 posts
Posted by zkr123 on Thursday, September 1, 2016 8:34 PM

I hope they don't retire the Acela I's, they would be a welcome sight on the Keystone line.

  • Member since
    September 2008
  • 1,112 posts
Posted by aegrotatio on Thursday, September 1, 2016 10:38 PM

If Acela I were used on the Keystone they will become as reliable as the HHP-8s were, and possibly worse.  The only reason the Acelas were relatively reliable was that they had the manufacturer-supported "gold plated" maintenance program while the HHP-8s did not.  Remove that gang of factory-trained repairmen and you're going to be broken down in Lancaster five times a month.

 

 

  • Member since
    January 2002
  • From: Canterlot
  • 9,575 posts
Posted by zugmann on Monday, September 5, 2016 3:51 PM

I'd rather the keystone line get some new equipment (perhaps a couple brand new Acela-2 sets?), instead of NEC hand-me-downs.  (At least they got the new electrics by some miracle).

 

In the meantime, there's still a few low-level stations that need upgraded.

It's been fun.  But it isn't much fun anymore.   Signing off for now. 


  

The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy