Login
or
Register
Home
»
Trains Magazine
»
Forums
»
General Discussion
»
Ball signals
Ball signals
1972 views
2 replies
Order Ascending
Order Descending
Anonymous
Member since
April 2003
305,205 posts
Ball signals
Posted by
Anonymous
on Sunday, August 10, 2003 1:10 AM
How were ball signals used? When you had to display more than one ball, did you attach the ball manually to the rope and then hoist it up? And were there ever aspects where balls would appear side-by-side, or in other patterns?
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Ball signals
Posted by
Anonymous
on Sunday, August 10, 2003 1:10 AM
How were ball signals used? When you had to display more than one ball, did you attach the ball manually to the rope and then hoist it up? And were there ever aspects where balls would appear side-by-side, or in other patterns?
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Sunday, August 10, 2003 10:58 AM
These are also referred to as highball signals. Two balls would be permenantly atatched to two hanging ropes. The last two of these were used by the Boston & Maine and were in operation until the 1970's. One of these was located near Waumbek Junction, N.H. It was located at a crossover of the B.&M. and Maine Central. If one ball was raised it would give B.&M. trains the right-of-way. If both balls were raised it would allow for Maine Central trains to proceed. Both balls would be lowered when switching was being done. All trains had to stop within 500 feet of the crossover. The balls would be hoisted up manually. While the way this signal was operated was used in this case, at some other crossings how the balls were raised had different meanings. Perhaps someone else will enlighten us on them.
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Sunday, August 10, 2003 10:58 AM
These are also referred to as highball signals. Two balls would be permenantly atatched to two hanging ropes. The last two of these were used by the Boston & Maine and were in operation until the 1970's. One of these was located near Waumbek Junction, N.H. It was located at a crossover of the B.&M. and Maine Central. If one ball was raised it would give B.&M. trains the right-of-way. If both balls were raised it would allow for Maine Central trains to proceed. Both balls would be lowered when switching was being done. All trains had to stop within 500 feet of the crossover. The balls would be hoisted up manually. While the way this signal was operated was used in this case, at some other crossings how the balls were raised had different meanings. Perhaps someone else will enlighten us on them.
Reply
Edit
coalminer3
Member since
January 2001
From: WV
1,251 posts
Posted by
coalminer3
on Tuesday, August 19, 2003 1:22 PM
Get a copy of the Fall 2003 issue of Classic Trains. Jim Shaughnessy has done a first-rate job with an article titled "Ball Signals of Vermont." Brought back a lot of memories and had some excellent information.
work safe
Reply
coalminer3
Member since
January 2001
From: WV
1,251 posts
Posted by
coalminer3
on Tuesday, August 19, 2003 1:22 PM
Get a copy of the Fall 2003 issue of Classic Trains. Jim Shaughnessy has done a first-rate job with an article titled "Ball Signals of Vermont." Brought back a lot of memories and had some excellent information.
work safe
Reply
Join our Community!
Our community is
FREE
to join. To participate you must either login or register for an account.
Login »
Register »
Search the Community
Newsletter Sign-Up
By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our
privacy policy
More great sites from Kalmbach Media
Terms Of Use
|
Privacy Policy
|
Copyright Policy