SD60MAC9500
What we have here is bypassed couplers - the other car might not be in any better condition.
Never too old to have a happy childhood!
Bypassed drawbars could indeed have caused this.
It could also be from a minor sideswipe, I say minor because it is not derailed.
I've also seen similar damage from customers using heavy equipment to switch cars, a front-end loader is capable of doing a lot of damage if you push on the wrong spot.
Greetings from Alberta
-an Articulate Malcontent
That's a little more severe than most bypassed drawbars I've seen. Someone smacked the heck out of it.
It's been fun. But it isn't much fun anymore. Signing off for now.
The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any
I remember us kicking one at substantial speed, only for the drawbars to bypass and cause enough damage that we couldn't couple onto the receiving car from that end (it still wasn't nearly as bad as this one).
It was easier to chain it up instead of running around and pulling the whole track out from the other end of the yard, so I headed over to get us lined up while the brakeman and engineer dealt with the car. The brakeman, having never used a chain before, decided to wrap it around the operating lever on the unit, so when they pulled away it just ripped the lever off.
This could also have been caused by a broken knuckle or pulled drawbar, if the trailing portion of the separated train runs into the front with enough speed there is the potential for severe damage.
This is the original picture I wanted to post. Had a few issues moving it around. So.. Here's problem number two...
Rotary drawbar is upside down. The SBU only looks like it is on the wrong side of the drawbar, it is actually on the correct side but once the drawbar is spun back around it will be upside down.
Sidenote about car damage, the dents and scrapes on the CN car in the background were probably caused from it being loaded/unloaded with junk ties or scrap, or possibly from the coal unloader at Grande Cache, Alberta (they used a couple large excavators to scoop the coal out).
SD60MAC9500 This is the original picture I wanted to post. Had a few issues moving it around. So.. Here's problem number two...
I don't see a problem with #2 because I don't see #2's picture. From SD70Dude's post, I can imagine what it looks like.
On the other one, I'm leaning for the pulled out drawbar.
Jeff
Now that's interesting, I can see the photo in both your post's quoted section and 9500's earlier post.
I remember seeing the SBU photo on a railroader Facebook group the other day as well.
SD70Dude Now that's interesting, I can see the photo in both your post's quoted section and 9500's earlier post. I remember seeing the SBU photo on a railroader Facebook group the other day as well.
I see a grey circle with a white rectangular shape in the center. Kind of like an international "Do not Enter" sign.
The other picture comes through fine.
jeffhergert SD70Dude Now that's interesting, I can see the photo in both your post's quoted section and 9500's earlier post. I remember seeing the SBU photo on a railroader Facebook group the other day as well. I see a grey circle with a white rectangular shape in the center. Kind of like an international "Do not Enter" sign. The other picture comes through fine. Jeff
Jeff try this link I uploaded it to flickr.
SD60MAC9500This is the original picture I wanted to post. Had a few issues moving it around. So.. Here's problem number two...
Saw the picture earlier - now it has been replace by the forbidden emoji
SD60MAC9500Jeff try this link I uploaded it to flickr.
Does bypassed drawbars usually happen on a curve or switch?
Still in training.
That's where I copied it from If You Work(ed) for the railroad Facebook group.
I'm using Google Chrome as my browser. That may be the problem using another browser?
Lithonia OperatorDoes bypassed drawbars usually happen on a curve or switch?
It can happen anywhere - especially with long drawbar cars.
SD60MAC9500I'm using Google Chrome as my browser. That may be the problem using another browser?
I'm using chrome, under Linux and your second picture was replaced by the "broken link" image when I first tried to view it while not logged onto Google. And then after I logged onto Google it was replaced by the white rectangle thing Jeff is talking about.
Looks like the image is sitting in a google user account, perhaps hot linking is blocked at the host? Can see the image just fine at Flickr
Looking at the first photo some more - I'm thinking the car may have been cornered instead of a bypassed drawbar.
zugmann Looking at the first photo some more - I'm thinking the car may have been cornered instead of a bypassed drawbar.
What does "cornered" mean?
_____________
"A stranger's just a friend you ain't met yet." --- Dave Gardner
Paul of CovingtonWhat does "cornered" mean?
SD60MAC9500 jeffhergert SD70Dude Now that's interesting, I can see the photo in both your post's quoted section and 9500's earlier post. I remember seeing the SBU photo on a railroader Facebook group the other day as well. I see a grey circle with a white rectangular shape in the center. Kind of like an international "Do not Enter" sign. The other picture comes through fine. Jeff Jeff try this link I uploaded it to flickr.
That one worked. Thanks,
Overmod Paul of Covington What does "cornered" mean? "When a car, not in the clear on a track, is struck by a train, engine or car on another track."
Paul of Covington What does "cornered" mean?
"When a car, not in the clear on a track, is struck by a train, engine or car on another track."
Thanks, O.
Paul of Covington Overmod Paul of Covington What does "cornered" mean? "When a car, not in the clear on a track, is struck by a train, engine or car on another track." Thanks, O.
To my eye - the damage appears too minimal for a cornered car. In such a incident you would see more carbody damage - the carbody does not appear damaged.
Our community is FREE to join. To participate you must either login or register for an account.