Trains.com

What kind of inspections do trains get?

2603 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2018
  • 47 posts
What kind of inspections do trains get?
Posted by RailRoader608 on Monday, April 29, 2019 7:22 AM

I've heard of inspections where every X,000 miles the train needs to be inspected at a station. I've also heard of inspections where conductors or engineers are walking the full length of a train, which can be 4-6 miles round trip! 

 

I'm curious what the different types of inspections are and what their purpose is. Is it to check cars are securely coupled? or making sure the air brake line is ok?

  • Member since
    January 2002
  • From: Canterlot
  • 9,575 posts
Posted by zugmann on Monday, April 29, 2019 10:37 AM

It's been fun.  But it isn't much fun anymore.   Signing off for now. 


  

The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any

  • Member since
    February 2003
  • From: Guelph, Ontario
  • 4,819 posts
Posted by Ulrich on Monday, April 29, 2019 10:52 AM

Up until  the early 80s standing inspections were conducted at regular intervals (every 40 miles on the CP for example). These were eliminated when roller bearing trucks and hotbox detectors came along. At the time brakemen would have to walk the entire length of the train regardless of the weather.. every 40 miles.. so typically two or three times in a shift. I'm guessing they generally  had no trouble passing their annual physicals.

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Monday, April 29, 2019 11:17 AM

Ulrich
Up until  the early 80s standing inspections were conducted at regular intervals (every 40 miles on the CP for example). These were eliminated when roller bearing trucks and hotbox detectors came along. At the time brakemen would have to walk the entire length of the train regardless of the weather.. every 40 miles.. so typically two or three times in a shift. I'm guessing they generally  had no trouble passing their annual physicals.

Never heard of such inspections on the B&O - I hired out in 1965 and Train Order Stations or Interlocking Towers were nominally located every 10-15 miles and the operators at those locations were required to make inspections of the trains as the past and signal the rear end crew if any exceptions were noted.

Never too old to have a happy childhood!

              

  • Member since
    February 2003
  • From: Guelph, Ontario
  • 4,819 posts
Posted by Ulrich on Monday, April 29, 2019 11:57 AM

That's interesting. Maybe some railroads didn't have the standing inspections as they found the rollbys sufficient. 

https://www.railpictures.net/photo/683503/#remarks

 

https://www.railpictures.net/photo/692971/

 

  • Member since
    November 2018
  • 47 posts
Posted by RailRoader608 on Monday, April 29, 2019 12:13 PM

Is it safe to say most of the inspections are related to the brakes? (Which obviously makes sense). And if so, do electronically controlled pneumatic (ECP) brakes have less strict inspection requirements?

  • Member since
    January 2002
  • From: Canterlot
  • 9,575 posts
Posted by zugmann on Monday, April 29, 2019 12:32 PM

RailRoader608
Is it safe to say most of the inspections are related to the brakes? (Which obviously makes sense). And if so, do electronically controlled pneumatic (ECP) brakes have less strict inspection requirements?

No.  Air brakes tests are for the brake/brake equipment.  You do have other components on the cars that have to be inspected (wheels, loads, tie downs, safety appliances, placards, etc).  Those are found in the various rulebooks the companies use.

It's been fun.  But it isn't much fun anymore.   Signing off for now. 


  

The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any

  • Member since
    August 2005
  • From: At the Crossroads of the West
  • 11,013 posts
Posted by Deggesty on Monday, April 29, 2019 2:28 PM

I don't know if this was standard on other roads, but on occasion when I was on a UP train and talking with the flagman, he had to go where he could inspect a freight train that we had overtaken and were about to pass. 

Johnny

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Monday, April 29, 2019 2:38 PM

Deggesty
I don't know if this was standard on other roads, but on occasion when I was on a UP train and talking with the flagman, he had to go where he could inspect a freight train that we had overtaken and were about to pass. 

The 'normal' roll by inspection of a passing train by the train that is in the siding.  It is still required today.  When stopped and a man is on the ground - he can see, smell and hear things in the passing trains that one doesn't get for other vantage points.

When trains pass on multiple track territory today they convey the condition of each others trains over the road radio channel.

Never too old to have a happy childhood!

              

  • Member since
    December 2017
  • From: I've been everywhere, man
  • 4,269 posts
Posted by SD70Dude on Monday, April 29, 2019 3:22 PM

CN still requires crews to make a standing inspection of as much of their train as possible when stopped for a meet.  This rule is optional, but CN chooses to enforce it.

CROR 111 (e):

OPTIONAL: The conductor first arriving at a meeting point will arrange for a walking inspection of their freight train or transfer, inspecting as much as time and conditions permit.

Greetings from Alberta

-an Articulate Malcontent

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy