Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Rust streaks and pitting

3884 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2004
  • From: Central Ohio
  • 570 posts
Posted by basementdweller on Sunday, December 27, 2015 6:48 AM

Thanks for posting that video, never seen the gauze or salt methods before. 

  • Member since
    August 2003
  • From: Collinwood, Ohio, USA
  • 16,367 posts
Posted by gmpullman on Sunday, December 27, 2015 12:38 AM

Hi, Henry,

I have not used these but there are rust decals available. Some modelers that are unsure of their artistic ability say they are a good solution.

http://cs.trains.com/mrr/f/88/t/230537.aspx

This is one provider, there may be others,

http://www.weatheringsolutions.com/

Good Luck, Ed

  • Member since
    May 2011
  • 743 posts
Posted by Steven S on Sunday, December 27, 2015 12:15 AM

Here's a video showing the salt technique.  The gauze method that they show looks interesting.  I've never seen that one before.

 

Steve S

  • Member since
    February 2008
  • 2,360 posts
Posted by kasskaboose on Saturday, December 26, 2015 11:17 PM

Besides burnt umber and sienna, you might also want to get brown or rust brown artist paints (they are in tubes).  I squeeze some of them together and use a toothpick to blend them.  Then I use a brush to paint them on from top to bottom with mineral spirits or paint thinner to give a faded look. 

You also can just use the toothpick to put a circle with the color blend on the rolling stock.

  • Member since
    July 2006
  • From: Bradford, Ontario
  • 15,797 posts
Posted by hon30critter on Saturday, December 26, 2015 10:19 PM

Henry:

One addition to what Steve described re using artists oils. Paint thinner can be used to creat the rust streak that is caused by rain running down the sides of the cars below the rust spot. Once the rust 'spot' has dried mostly, use a small amount of thinner to 'draw' the rust streak down the side. Less is more or you will just wash the rust spot off.

Dave

I'm just a dude with a bad back having a lot of fun with model trains, and finally building a layout!

  • Member since
    March 2011
  • 1,950 posts
Posted by NVSRR on Saturday, December 26, 2015 8:42 PM

I have heard of a new technique using salt and layering paint.  I know there are a couple vids out there but n ot sure how good they are in terms of using that technique.

 

Shane

A pessimist sees a dark tunnel

An optimist sees the light at the end of the tunnel

A realist sees a frieght train

An engineer sees three idiots standing on the tracks stairing blankly in space

  • Member since
    May 2011
  • 743 posts
Posted by Steven S on Saturday, December 26, 2015 7:34 PM

I think the guys over at the Weathering Shop tend to use burnt umber and burnt sienna artist oils for that.  For streaks, you can use a brush.  For spots and patches of rust, tear up a cosmetic sponge and dab small amounts on.  You'd probably want to knock most of the paint off by dabbing it on a scrap of cardboard first, sort of like dry brushing.

http://www.theweatheringshop.com/

 After clicking Enter, click Artists, select an artist and then click Models to see a gallery of various models.

Steve S

  • Member since
    October 2011
  • 21 posts
Rust streaks and pitting
Posted by nypeterbilt379 on Saturday, December 26, 2015 7:16 PM
What is a simple way to creat rust streaks and pitting on a boxcar?

Henry-

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!