Hi,
Well I won't mince words, I screwed up. I need to reset an NCE D13SRP decoder back to factory default and need your help.
Yes, I've got the instructions but can't find any reference to default..........
THANK YOU !!!!!
Mobilman44
ENJOY !
Living in southeast Texas, formerly modeling the "postwar" Santa Fe and Illinois Central
CV30=2 should do it for NCE.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
YIKES!
First - Thank You Randy, you are always there!
Second - I overlooked the "cv30 default" reference in the instructions.
Third - The decoder will not accept the reset.
Fourth - I have concluded I fried the decoder.
Sometimes I miss DC...................
Well, I could just not give up. As I never saw/smelled smoke, I figured there was still hope.
I had been working with a Digitrax Zephyr in the hobby room and I wasn't getting anywhere. So I took it to the layout and worked it on the programming track with the Digitrax Super Chief and eventually got it back to default. "O3" never looked so good!
Thanks again Randy !!!!
http://www.nmra.org/sites/default/files/sr201402_dcc.pdf
Alton Junction
Rich:
That's a handy chart!
Thanks
Dave
I'm just a dude with a bad back having a lot of fun with model trains, and finally building a layout!
hon30critter Rich: That's a handy chart! Thanks Dave
Rich
Apparantly no one has pressed the NMRA to add it to the standards and RP's. It's now too late, they'll never do it, because if they ,ake the stamdard CV8=8 then everyone who uses CV30-2 will be out of compliance, and vice versa. At best it could become an RP which changes exactly nothing as they could strongly suggest it be one or the other but the manufacturers would be free to do what they wanted. Back in the early days of setting up the required and recommended CVs, no one thought about doing a full reset automatically. Lots of old decoders have no reset option.