Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

ESU Lokpilot settings for GMD-1

2870 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2006
  • From: Germany
  • 524 posts
ESU Lokpilot settings for GMD-1
Posted by faraway on Friday, August 29, 2014 10:39 AM

Rapido writes on the web page:

  1. ESU has made a GMD-1 function mapping which can be downloaded into their non- sound decoder (54615) so that the function buttons and motor control are exactly the same as our factory-released sound versions. This is available for download on the GMD-1 page in the Support section of our web site. You will need an ESU LokProgram- mer to write the function mapping to the 54615 decoder. If you don’t have a LokPro- grammer, you can adjust CVs in the usual way. 

Problem is I can not find the refered file containg the function mapping (CV settings) or any other info how to setup the Lokpilot for the GMD-1. Did you find the GMD-1 specific file to be used with the LokProgrammer?

ps. I have a GMD-1 in DC version and an ESU 54615 on order and want to be prepared for setup when they arrive.

Reinhard

  • Member since
    April 2004
  • From: Ontario Canada
  • 3,570 posts
Posted by Mark R. on Friday, August 29, 2014 10:54 AM

According to the instructions, you better contact Jason and yell at him .... I don't see it on their site either ....

Mark.

¡ uʍop ǝpısdn sı ǝɹnʇɐuƃıs ʎɯ 'dlǝɥ

  • Member since
    February 2006
  • From: Germany
  • 524 posts
Posted by faraway on Friday, August 29, 2014 12:26 PM

I used the contact function on their web site. Got an answer to allow them some days to answer due to manpower shortage.... Anyhow thanks for looking too.

Reinhard

  • Member since
    April 2004
  • From: Ontario Canada
  • 3,570 posts
Posted by Mark R. on Friday, August 29, 2014 1:14 PM

I have the full CV list for the GMD-1 Loksound decoder if you need to glean any specific CV values from it in regards to motor control and function assignments.

Mark.

¡ uʍop ǝpısdn sı ǝɹnʇɐuƃıs ʎɯ 'dlǝɥ

  • Member since
    February 2006
  • From: Germany
  • 524 posts
Posted by faraway on Sunday, August 31, 2014 1:47 AM

Mark, I have no specific CV but it would be nice to get a copy.

Reinhard

  • Member since
    April 2004
  • From: Ontario Canada
  • 3,570 posts
Posted by Mark R. on Sunday, August 31, 2014 7:19 PM

Sent you a PM Reinhard ....

Mark.

¡ uʍop ǝpısdn sı ǝɹnʇɐuƃıs ʎɯ 'dlǝɥ

  • Member since
    February 2006
  • From: Germany
  • 524 posts
Posted by faraway on Tuesday, September 2, 2014 3:17 AM

Mark, thanks found the email

 

ps. Where does Rapido mount the speaker? A rectange one on top of the drive under the long hood or a round one in the tank?

Reinhard

  • Member since
    April 2004
  • From: Ontario Canada
  • 3,570 posts
Posted by Mark R. on Tuesday, September 2, 2014 11:11 AM

According to the parts diagram ....

http://www.rapidotrains.com/manuals/GMD1%201900%20Explode.pdf

.... the speaker mounts on top of the motor (part #134). They must be using an I-Phone type speaker and sound chamber. (?)

Mark. 

¡ uʍop ǝpısdn sı ǝɹnʇɐuƃıs ʎɯ 'dlǝɥ

  • Member since
    February 2006
  • From: Germany
  • 524 posts
Posted by faraway on Tuesday, September 2, 2014 11:54 AM

Mark R.

According to the parts diagram ....

http://www.rapidotrains.com/manuals/GMD1%201900%20Explode.pdf

.... the speaker mounts on top of the motor (part #134). They must be using an I-Phone type speaker and sound chamber. (?)

Mark. 

 

I see. It is a very special one. Makes sense because Rapido makes some very proud statements about it's Loksound/speaker comination and sells them as a bundle ( http://www.rapidotrains.com/decoders.html ).

Reinhard

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!