i need help with the wiring of a tortoise slow motion switch machine to the ds64 as a crossing gate and also the proper way to wire the flashing lights. ive been reading the digitrax directions numerous times and i cant make sense of it.
The DS 64 does not control crossing gates or flashing lights. For that, you need a Logic Rail Technologies Grade Crossing Pro or similar circuit board. The DS 64 only controls switch machines.
You can purchase a Grade Crossing Pro from http://www.logicrailtech.com
cacole The DS 64 does not control crossing gates or flashing lights. For that, you need a Logic Rail Technologies Grade Crossing Pro or similar circuit board. The DS 64 only controls switch machines. You can purchase a Grade Crossing Pro from http://www.logicrailtech.com
That's not true. The DS-64 can be configured to flash the lights and to use a Tortoise to control a gate. You do need detection to tell it when unless you want to control them from the throttle.
Dave
Lackawanna Route of the Phoebe Snow
Phoebe Vet cacole The DS 64 does not control crossing gates or flashing lights. For that, you need a Logic Rail Technologies Grade Crossing Pro or similar circuit board. The DS 64 only controls switch machines. You can purchase a Grade Crossing Pro from http://www.logicrailtech.com That's not true. The DS-64 can be configured to flash the lights and to use a Tortoise to control a gate. You do need detection to tell it when unless you want to control them from the throttle.
Try these links:
http://www.digitrax.com/kb/index.php?a=393
http://www.digitrax.com/kb/index.php?a=411
Engineer Jeff NS Nut Visit my layout at: http://www.thebinks.com/trains/