Thanks John.
I found the homabed website and will give them a call today. It looks like what I want. I've already started cutting and installing the 1/2" ply sub-roadbed. My trackplan has more curves than straight sections so I'll probably get the "curvable" type. I saw they make a version for HOn3 without a bevel so it looks like I'm good to go.
-G-
Raised on the Erie Lackawanna Mainline- Supt. of the Black River Transfer & Terminal R.R.
Philip (pcarrell)
Wow! I'm impressed. I'm getting ready to lay track and will try your method. It sounds better than anything else I've tried or read about.
blueridgehobo
Homa-bed comes in either straight sections (solid), or curveable sections (with cuts crosswise at an angle). Each of the pieces is half a section of roadbed cut lengthwise so it can be laid on a centerline drawn on the sub-roadbed, just like when using cork. N scale Homa-bed may be one piece. I think they have a web site but I can't seem to be able to find the link right now. I used the HOn3 size for my former TT scale standard gauge layout.
By the way. Half-inch Homasote can be used for sub-roadbed in smaller scales if it is supported every foot or so. I know it's not recommended, but I like to try different things sometimes just so I don't get used to taking everyones word for something all the time. That layout lasted for 15 years and ran well with no problems associated with warping or flexing track. As a mater of fact, the track didn't require any maintenance at all other than the normal cleaning.
Elmer.
The above is my opinion, from an active and experienced Model Railroader in N scale and HO since 1961.
(Modeling Freelance, Eastern US, HO scale, in 1962, with NCE DCC for locomotive control and a stand alone LocoNet for block detection and signals.) http://waynes-trains.com/ at home, and N scale at the Club.
Lateral-G wrote: I checked out the homabed and it looks neat. How does it form around curves?-G-
I checked out the homabed and it looks neat. How does it form around curves?
Once you get the hang of it Homabed installs just like cork. Since homasote does not compress (for curves) like cork does, slots are cut in the Homabed product to allow it to curve. Homabed is offered for N scale so it should be able to handle the tight curves that you may have in narrow gauge.
Here is an installation picture:
The outer curve it 1/4" thick HO Homabed transitioning to a 28" radius curve. The inner curve is 1/8" Homabed transitioning to 24" radius. The easiest way to install is to:
After I have layed 3 to 4 pieces of the outer roadbed (10' or so), the adhesive caulk that I use (Polyseamseal) has set up enough so that I can remove the centerline pins and start laying the inner half of the roadbed. Just spread your glue and push the inner half up against the outer half, pinning as you go. The whole process is quick and painless once you get the hang of it.
1/8" Homabed is somewhat fragile due to the slices in the roadbed but it is no issue if you break a piece. Just use a couple of extra pins when you lay the broken pieces together.
Once the glue has dried (only a few hours with the adhesive caulk I use) remove the pins and paint. I usually give the roadbed a coat of paint first (ballast gray color); let the paint dry overnight; then I sand the tops smooth. Painting first reduces the dust that might be generated from the sanding. I use a small electric sander (a Black & Decker Mouse) and the sanding step goes quickly too.
Homabed and Homasote sand like wood and do not chip or tear apart like cork does but sanding can generate a lot of dust if sanded "raw." The slots in the Homabed disappear once painted and balasted. Sometimes I will give the Homabed a second coat of paint on the top once sanded - depending upon how much paint was sanded away.
With Homabed you can easily sand tapers into the roadbed if you need to transition from 1/8" down to zero. If you are sanding a transition like this then an electric sander in one hand and a shop vac in the other hand is recommended.
Also note that Homabed comes in distinct halves for curves. The slots are always aligned toward the outer edge of the curve (see picture) - if the curve is tight. For gentle curves it does not matter. Homabed is also available with a gentle 60 degree bevel on the edge (or 30 degrees depending upon how you think about it). The Homabed in the picture has the 60 degree bevel which makes the ballast edges look wider (they are). This may appear more natural for your narrow gauge usage.
This is not an advertisement for Homabed but I like it.
I hope this helps.-John
I don't use either plywood or homasote for my roadbed, I use masonite spline. It's fast, inexpensive, sturdy, forms natural curve easements ... giving you a very nice flowing roadbed.
Just look at the photos from Electro's thread on his layout to see how nice the stuff works. Great looking, flowing roadbed.
That's maybe $10 worth of masonite spline roadbed in the photo, and with almost NO waste. How much would it cost you to do that with plywood or homasote, and how much waste would you have?
Joe Fugate Modeling the 1980s SP Siskiyou Line in southern Oregon
My right-of-way, from the track down, is flex caulked to a posterboard template the exact size of the flex track, fastened to pink foam (fan-fold underlayment, about 10mm thick) with caulk. The foam is caulked to plywood, or to the inside of a steel stud. I use grey caulk under the track and template, and white, clear or whatever is handy under the foam.
The foam isn't shaped like cork roadbed. For visible track, I cut ballast shoulders where they would be appropriate, but the total width is that of the cookie-cut plywood. Also, I cut the shoulders after the template is in place, but before the track is fastened down. (Yes, I work with a shop-vac nozzle in one hand...)
So far, the combination seems to be a very effective noise-reducer. Whether that will be true after installing ballast remains to be seen.
Chuck (modeling Central Japan in September, 1964)
I edited my subject line...I meant the actual roadbed.
The sub-roadbed is 1/2" ply. I've been studying many photos & DVD's of D&RGW and C&S trackage and have not seen any noticeable raised roadbed. I understand what's been mentioned regarding the hardshell scenery. It would be easier to build up to a somewhat raised trackage rather than what would happen when the scenery starts to "pile up" against it.
Don't use homasote for a "sub-roadbed" it has little strength used that way. But if you are looking for a very low profile roadbed then Homabed comes in 1/8" thickness in HO and NG widths.
1/8" scales to 11 inches of balast in HO and of course you can still work the scenery up around it.
Good luck,-John
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
Subroadbed is what goes under your roadbed. Plywood is very stable, and will not 'sag' like Homasote. I use 1/2" plywood with Homabed roadbed on top of that. Cork will work fine as well.
I do not understand why you feel roadbed under NG is not right. Usually there is some roadbed under NG, and I have seen/ridden the Colorado and EBT lines several times. N scale cork roadbed may be just about right for your NG trackage.
Foam will work, but it seems you are going to a lot of expense & work after you have built your subroadbed from 1/2" plywood. I would save it for scenery. Myself, I would use standard HO cork roadbed(glued to the plywood). Sand it with a 'Sureform' tool to round off the edges and them glue the M-E flex to the roadbed with the latex. A very good combination for smooth running and no sound/noise.
Jim
Modeling BNSF and Milwaukee Road in SW Wisconsin
If you mean sub-roadbed as in just where the tracks will go with open space on either side versus a table top, I would use some kind of roadbed material on top of it. Either WS foam roadbed or cork, or other ballast shape roadbed material. Now I'll tell you why. My last layout was TT narrow gauge using N scale track and I used homasote for sub-roadbed where the tracks ran with no ballast profile roadbed material. When it came to putting in the hard shell scenery between the sub-roadbeds, the plaster scenery base strips (plaster soaked paper towels) were laid up and slightly over the sub-roadbed. This essentially made the landform slightly higher than where the track was laying. I made it work, but I sure wish I had put down a ballast profile roadbed first. You can always fill it with scenery material to make the track look like it was laid on the ground if the ballast profile is too high.
I'm putting down the sub-roadbed on the layout now. I'm using 1/2" ply but can't decide what to put on top of it; 1/2" homasote or some thickness of foam (pink or blue).
I'm not planning on spiking the track (HOn3 code 55 by ME) but using latex adhesive. Since I model narrow gauge there isn't going to be any sort of traditional cork roadbed.
What's your guys' preferences to the roadbed material?