Hello,
Does anyone out there have the exploded view of the Revorissi Heisler? HO Seeker does not have the information. I wish to Install DCC in this engine. I have done many installations, but am not sure how to remove the shell. Any help or suggestions.
Jerry
Which version are you speaking of? There were significant differences between the '70s or '80s production runs (which I have one of), and the more recent ones. Although the shells are probably similar - Rivarossi ads touted improved detailing for the newer version - the motor and drive were/are very different.
I don't have access to mine for the next couple of weeks, but if nobody else anwers I will look then.
yours in geared steam
Fred W
Fred,
I have the older version.
FROM 2002 PUBLICATION
1 REMOVE THE SCREW INSIDE THE STACK
2 REMOVE PIPING FROM AIR TANKS
3 LIFT FRONT OF BOILER UPWARD TO DISENGAGE THE WIRE BRACES, THEN PULL FOWARD TO RELEASE THE PEGS AND HANDRAILS FROM THE CAB
4 GENTLY PULL THE REAR SANDBOX FROM THE BACK OF THE BUNKER
5 REMOVE THE WATER TANK HATCH FROM THE BUNKER AND REMOVE THE SCREW
6 REMOVE THE SMALL AIR TANK FROM THE RIGHT FRONT OF THE CAB, UNDER THE RUNNING BOARD
REMOVE THE FRONT SCREW THE LIFT THE CAB & BUNKER OFF THE FRAME
PHRED,
Thanks, Jerry