What adhesive for foam to plywood?

[dadret]

Liquid Nails makes an adhesive for foam board and it works very well

[Phoebe Vet]

I use Liquid Nails for large areas and Elmers for small spots.

So far so good.

[Don Z]

Vince,

I used Titebond 2 yellow wood glue, thinned down so I could apply it with a short nap roller. Once the glue was spread, I positioned my foam sheets and then used all of my old Walthers catalogs to weigh down the foam until the glue dried. I recently had reason to remove a small section of the faom and believe me, it was stuck down really good!

Remember to peel the plastic film from the foam before gluing it down!

Don Z.

[medic_149]

I used liquid nails for projects. Or you can use latex caulk. Both work well and bond after about 2 hours. Just make sure you get the foam friendly variety. Some advhesives will destroy the foam.

[jblackwelljr]

I just used cheap latex caulk - it's been down for almost 2 years no with no issues

Welcome to the forum, BTW.

 

EDIT - Oops, you've been here since 2006 - sorry.....welcome anyway.

 

[Wrangler]

Guys,

  Very soon I'll be applying 1"blue foam to 1/2" plywood.What is the best adhesive for this? I'm looking for a quality product with ease of application,permenante bond and possible low odor.

Thanks,

Vince