Trains.com

Do you need a railbender for Code 250?

2511 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2006
  • From: silver spring, md
  • 1,232 posts
Posted by altterrain on Sunday, June 24, 2007 10:21 AM

I belly bend my code 335 stainless, granted not for the mainline curves but wherever I need an odd curve for a spur or siding. It works just fine. As long as your not looking for a super smooth curves you will not need a rail bender.

 -Brian

President of
  • Member since
    October 2006
  • From: Brookfield, WI
  • 17 posts
Posted by cokeoven on Sunday, June 24, 2007 8:48 AM
I have code 215 and 250 Llagas creek aluminum rail w/llagas tie strips, and all I have to do is slide the rail into the ties, and it bends and holds shape like bending HO flex track. If you are gioing to be using aluminum, I feel that there is no need for a rail bender
  • Member since
    August 2005
  • From: North Coastal San Diego
  • 947 posts
Posted by Greg Elmassian on Monday, September 4, 2006 1:03 PM

Belly bending seems to work fine for brass and nickle silver code 250. You should be able to get an inexpensive bender for this rail though, I think Llagas Creek has one at a reasonable price.

I would opt for the bender, and get the rails perfect before putting in the tie strips. Often belly bending does not curve the rail ends well, so at the rail joints you have track that is too straight.

Regards, Greg

Visit my site: http://www.elmassian.com - lots of tips on locos, rolling stock and more.

 Click here for Greg's web site

 

  • Member since
    June 2002
  • From: Burke, Virginia
  • 185 posts
Posted by TheJoat on Friday, September 1, 2006 8:33 PM
I've been putting down the AMS code 250 brass track without using a railbender.   I've been using the ladder method for the roadbed and find that it is nice and easy to bend.   Screws hold the track down to the roadbed.
Bruce
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, August 21, 2006 2:36 AM

Rail benders  are  section specific and ideally  best obtained for the specific manufacturer.

Some are multi head but if you are only using one make  then it doesnt matter,Personally any rail is best bent using a bender to avoid distortion.

  • Member since
    August 2003
  • 6,434 posts
Do you need a railbender for Code 250?
Posted by FJ and G on Saturday, August 19, 2006 8:28 PM
And,

Are there different rail benders for different codes or does one bender fit all sizes?

Thanks.


Sorry; put in wrong category and tried but failed to delete/move. Anyway, still appreciate response

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy