Did you get the manual?
You might be able to send the factory reset by programming on the main, but of course if you have a digitrax system you should be able to use service mode.
Reading between the lines, since you state you don't have a PTB-100, that implies to me you are having difficulty to enter service mode.
Find the reset command and issue in via "Programming On the Main"...
Greg
Visit my site: http://www.elmassian.com - lots of tips on locos, rolling stock and more.
Click here for Greg's web site
Steffen:
You might get a better response at one of the following forums:
Bachmann
My Large Scale
Large Scale Central
Good luck!
Hello friends, I have a big problem. I have bought a Bachmann Climax(Large scale) with factory installed Soundtrax Sounddecoder. I will change the adress from 3 to 7. But it is horrible... I run with Digitrax and programm with JMRI. But now the locomitive has forgot his own adress... What can I do ? I haven´t a PTB-100, but this cant´t be the on only solution. Can everyone help?
Greetings from Germany, Steffen
Get the Garden Railways newsletter delivered to your inbox twice a month