Hello friends, I have a big problem. I have bought a Bachmann Climax(Large scale) with factory installed Soundtrax Sounddecoder. I will change the adress from 3 to 7. But it is horrible... I run with Digitrax and programm with JMRI. But now the locomitive has forgot his own adress... What can I do ? I haven´t a PTB-100, but this cant´t be the on only solution. Can everyone help?
Greetings from Germany, Steffen
Steffen:
You might get a better response at one of the following forums:
Bachmann
My Large Scale
Large Scale Central
Good luck!
Did you get the manual?
You might be able to send the factory reset by programming on the main, but of course if you have a digitrax system you should be able to use service mode.
Reading between the lines, since you state you don't have a PTB-100, that implies to me you are having difficulty to enter service mode.
Find the reset command and issue in via "Programming On the Main"...
Greg
Visit my site: http://www.elmassian.com - lots of tips on locos, rolling stock and more.
Click here for Greg's web site
Get the Garden Railways newsletter delivered to your inbox twice a month