Trains.com

Missing Gauntlet Track Sections

732 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2002
  • 273 posts
Posted by lionelsuperotrack on Friday, November 10, 2006 10:02 PM

TCA member Dick Reichard has developed a protoype of a gauntlet section out of 027 track. Dick is a craftsman supreme and had a prototype at Spring 2006 York. It was exceedingly cleverly done. Of course, Dick is a mechanical engineer by schooling. Here is a link to an article he wrote about making ones own switches:

http://www.tcamembers.org/articles/operating/marxsw/index.html

Dick built a double crossover in "Super O" which is incredible as well.

Very best, Mike

  • Member since
    July 2003
  • From: Watkinsville, GA
  • 2,214 posts
Posted by Roger Bielen on Thursday, November 9, 2006 5:38 PM
wallyworld,  The only times I've seen any mention, use, of a gauntlet track was with HO and 2 rail O.  The simplest solution would be using switches (turnouts) that are wired so that the train stays on the same track coming off on the opposite side.
Roger B.
  • Member since
    July 2002
  • From: A State of Humidity
  • 2,441 posts
Posted by wallyworld on Thursday, November 9, 2006 12:21 PM
I was thinking more of a configuration where the outside rail of let's say, track A has a frog where the outside rail of track B would crossed. The outside rail of Track A then would be located between the center rail and outside rail of Track B. The combined width of A\B would probably require the width of a double track bridge ( which is prototypically silly ) but it would make for an interesting set of controlling signals and operations, wherein one train would have to wait for the other to cross the gauntlet. Another goofy idea would be a timer for a runaway track where you would have to keep to a certain speed or your train goes off into the runaway siding...

Nothing is more fairly distributed than common sense: no one thinks he needs more of it than he already has.

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Thursday, November 9, 2006 11:52 AM

I think this would be probematic with respect to center-rail pickups and the shoes for uncoupling and operating cars.  If the rails of one track are evenly spaced between those for the other track, they would operate as uncoupling-operating rails for the other track.  If they are closely spaced, the center rails would probably be bridged by the pickups.

A possible practical arrangement would be to use the center rail of one track as an outside rail of the other.  This would limit the number of rails to 4; but you would need to switch power connections according to which track is in use.

Bob Nelson

  • Member since
    July 2002
  • From: A State of Humidity
  • 2,441 posts
Missing Gauntlet Track Sections
Posted by wallyworld on Thursday, November 9, 2006 9:44 AM
I have yet to locate any gauntlet sections for any make of track.. They certainly would add interesting operational schemes to a layout. I always wanted to incorporate one into an approach to a bridge. No one has, or does make these, right?

Nothing is more fairly distributed than common sense: no one thinks he needs more of it than he already has.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month