block power controllers

[cheech]

thre have been many posts about power to multiple blocks from two taps on the same transformer. the suggestions are usuall to use a single-pole-double-throw-center-off toggle switch for each block, to connect the block to either of two transformer outputs, or neither. does the lionel block controller do the same thing?

ralph

[chuck]

Yes, but you will need a command base and CAB-1 as well as a serial data cable to control it. Manual is available for downlaod from the Lionel web site.

www.lionel.com/products/productnavigator/InstructionManuals/71-4184-250.pdf

[lionelsoni]

I don't keep up with TMCC, etc.  Maybe someone who does can answer.