Thanks to everyone !!!
Very nice !
You have a custom engine.
246 shell, metal scout motor.
mystery solved !
That would be my guess as well. Motors are easy to find at train shows but then again so are loco shells. It could have even been the opposite way around, someone bought a 246 shell to go with a motor they already had.
Trains, trains, wonderful trains. The more you get, the more you toot!
The body is an original 246 plastic loco, that someone replaced the plastic Scout motor, with what is referred to as a parallel plate 027 motor, which weighs more than the plastic motor. Many people struggle to repair the plastic Scout motors, which are a little tricky to fix. With some modifications to the 246, someone just adapted the better motor, to restore it back to running condition.
Thanks for your help, been busy for a while...
Upon further review... the hole for the sideways E lever is hand-cut.
So I guess it's a re-body? it weighs signifantly more than the other 2 Scouts I have.
And it has a pickup in the tender. and weights in front and under cab. WHere did the motor come from ?
Here's some pics: https://photos.app.goo.gl/SzkYVUewzqC2g8Sr5
Thank for your help !
My thought on the E unit lever has to be a Die Cast Shell/body, that has been renumbered to 246. If the 246 is a Postwar locomotive, All the 246’s were plastic bodied, with the front/back 2 position E units. I think a photo would clear things up.
She has a plastic boiler. Same, or different ? How so ?
Does your 246 look like this ?
Thank you, Becky !
I've been thinking about this. This classic 246 from '59 to '61 is the one we think of when you say 246. This engine is all plastic.
When I google Lionel 246 I realized this number has been reused on newer engines, so we might not be talking about the same engine. Does your engine look like this picture ?
Paul
The standard configuration had the plastic lever going front to back:
Without a a photo we can’t help to identify it. Is the body plastic or die cast metal. The side/side lever is indicative of a die cast shell, and not the plastic shells. Are you 100% positive it is a true 246, and not a die cast she’ll, of Scout design, that has been renumbered. Need some answers!!
Would you know, I pretty much never come over here, but there was an electrical question someone had in the MR forums on using controls for 3 rail, and I see this post. I have my Dad's old Scout outfit, I'm not sure of the number, I'd have to get it out and check what the locoo is, but it definitely has a side to side E-unit lever. What I know abooout 'collectible' stuff would fit in a thimble, I set these things up and run them now and then, not store them away to stare out, but I doubt this is something really rare. Only because I NEVER have the special 'rare' version of anything.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
Is this a "rare item" .. or just another one of millions?
( working on inserting photo)
Thanks !
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month