Build a new steamlocomotive.

[Anonymous]

Lima's 2-6-6-6 Allegheny with 300 psi boiler pressure, 23 " cylinders and a little added weight to keep the factor of adhesion over 4! Increase the driver diameter to around 69-70" and add a little firebox heating surface.

[Anonymous]

Lima's 2-6-6-6 Allegheny with 300 psi boiler pressure, 23 " cylinders and a little added weight to keep the factor of adhesion over 4! Increase the driver diameter to around 69-70" and add a little firebox heating surface.

[AltonFan]

I am told by a friend who has been involved in steam locomotive restorations since the end of revenue steam operations that a lot of the specialized skills needed to do some of the work (especially boiler welding) are getting harder to find, at least in the US.

AIUI, locomotive boilers are held to tougher safety standards than marine or staionary boilers. (I am told marine and stationary boilers operate at much lower pressures.) Welders qualified to repair steam locomotive boilers are in short supply and command high rates when available. Persons who know how to setup valve gear are also getting harder to find. Also a lot of appliances were becoming diffcult to find by the early 1950s. To build a new steam locomotive from scratch today would be a custom job all around, and command custom pricing.

[Anonymous]

Has anyone ever estimated the cost of building a new / replica US loco? The total cost of putting the UK's A1 project on the rails is c.£2M (US$3.2M). And this is for a loco weighing 166 UK tons in working order. It would be interesting to compare with the estimates for any of the locos proposed above.

As for the boiler issue, UK and other European preserved locos regularly have components renewed: tubeplates, foundation rings, retubes. The resources still exist for manufacturing all of these items and most of the work can be conducted by no more than a medium sized engineering firm. The larger US locos would require heavier equipment, but I have seen my local preserved railway retube a tank loco with maybe 4-6 people working over 2 months. It's the new boiler that's the difficulty: satisfying new regulations for the level of performance required. But there is at least one European manufacturer who can do this.

With a larger industrial base and far greater number of potential supporters, surely the US can do - even on the bigger scale of the locos - what is done in Europe? There's a challenge!

[Anonymous]

Has anyone ever estimated the cost of building a new / replica US loco? The total cost of putting the UK's A1 project on the rails is c.£2M (US$3.2M). And this is for a loco weighing 166 UK tons in working order. It would be interesting to compare with the estimates for any of the locos proposed above.

As for the boiler issue, UK and other European preserved locos regularly have components renewed: tubeplates, foundation rings, retubes. The resources still exist for manufacturing all of these items and most of the work can be conducted by no more than a medium sized engineering firm. The larger US locos would require heavier equipment, but I have seen my local preserved railway retube a tank loco with maybe 4-6 people working over 2 months. It's the new boiler that's the difficulty: satisfying new regulations for the level of performance required. But there is at least one European manufacturer who can do this.

With a larger industrial base and far greater number of potential supporters, surely the US can do - even on the bigger scale of the locos - what is done in Europe? There's a challenge!

[Anonymous]

I would love to see a Union Pacific 7000 class 4-8-2 built. Also, an NYC 4-6-4 would be a hit. Born long too late to see them, never will. But before we go building new locomotives, we've got several thousand to restore- once we have all of those running, then we should think about building new ones. And jhhtrainsplanes is right: ALCO fans (I am one) would be dancing in the streets.

[Anonymous]

I would love to see a Union Pacific 7000 class 4-8-2 built. Also, an NYC 4-6-4 would be a hit. Born long too late to see them, never will. But before we go building new locomotives, we've got several thousand to restore- once we have all of those running, then we should think about building new ones. And jhhtrainsplanes is right: ALCO fans (I am one) would be dancing in the streets.

[Anonymous]

QUOTE: Originally posted by mcfarrand

Trains magazine once reported that NYC's Niagara class 4-8-4 was tested against the diesels of its day, and was slightly more efficient under certain conditions. It would be interesting to see how one would stack up today, or if one could be technically updated, yet still look like a Niagara...

AH INDEED WE ARE GATHERED HERE DREAMING OF SUCH BEAUTY.THAT WOULD BE SOMETHING IF WE COULD BRING BACK THESE MACHINES OF YESTERYEAR,I THINK WE'D ALSO BRING BACK A DIFFERENT AMERICA AS WELL.CARRY ON FOLKS AS I DREAM WITH YOU IN A DREAM OF AN AMERICA LONG GONE ALONG WITH IT'S GREAT AND MIGHTY MACHINES.

[Anonymous]

QUOTE: Originally posted by mcfarrand

Trains magazine once reported that NYC's Niagara class 4-8-4 was tested against the diesels of its day, and was slightly more efficient under certain conditions. It would be interesting to see how one would stack up today, or if one could be technically updated, yet still look like a Niagara...

AH INDEED WE ARE GATHERED HERE DREAMING OF SUCH BEAUTY.THAT WOULD BE SOMETHING IF WE COULD BRING BACK THESE MACHINES OF YESTERYEAR,I THINK WE'D ALSO BRING BACK A DIFFERENT AMERICA AS WELL.CARRY ON FOLKS AS I DREAM WITH YOU IN A DREAM OF AN AMERICA LONG GONE ALONG WITH IT'S GREAT AND MIGHTY MACHINES.

[ben13]

I would definently like to se a Q1 4-6-4-4 duplex be bulit again.

[ben13]

I would definently like to se a Q1 4-6-4-4 duplex be bulit again.

[AltonFan]

I am told that the only firm still capable of building a locomotive boiler is a US Navy shipyard (I forget which), which actually did some of this work for restoration projects, but ceased due to a law which prohibited government facilities from competing with the private sector.

I am also told that there are very few welders qualified to weld locomotive boilers.

[wallyworld]

Build new generation steam as Wardale is proposing. Let's go forward, not backward.

[wallyworld]

Build new generation steam as Wardale is proposing. Let's go forward, not backward.

[Anonymous]

Some of you may be aware of the work of the A1 Trust in the UK, which is building, from new, a post-war design of Pacific. Apart from the usual financial requirements, the major hurdles the project faces are: 1) changed and more exacting legislation, 2) relearning skills for design, manufacture and assembly and 3) scarce manufacturing resources able to cope with 'yesterday's' technology. This last is the critical one, as building large pressure vessels (or boilers to you) suitable for the stresses of railway operation have been almost extinct in Europe for 40-50 years. The boiler is the largest component on the loco, and the financial commitment to a single supplier without any fall-back exposes the project to risk. The Trust is being very cautious about selecting the supplier and making this commitment. For more info on the A1 Trust, go to a1steam.com.

The 3rd Generation steam, as proposed by Porta, Wardale et al would be cutting edge and subject possibly to even greater risk. But it may be possible to adapt other technologies (ship and power stations) to new methods of steam generation. Wardale's work in SA showed what could be done, and the Swiss have built smaller locos that outperform diesels on a number of fronts. This avenue shouldn't be neglected, if only to keep a second string to the internal combustion engine. But all new technology and machinery is initially expensive and runs considerable business risks.

So this is why Heritage Railways in the UK prefer to restore and maintain existing locos - the boiler is there already! Of course they have a limited lifespan but with care in use and maintenance they can last a surprisingly long time. I don't know what locos are available for returning to steam in the US and Canada, but my personal preference is for Berkshires, Hudsons and Northerns. The sight of a GNR S2 pounding away across plains would be quite tear-jerking! Isn't there one stuffed and mounted somewhere in the North-west?

[Anonymous]

Some of you may be aware of the work of the A1 Trust in the UK, which is building, from new, a post-war design of Pacific. Apart from the usual financial requirements, the major hurdles the project faces are: 1) changed and more exacting legislation, 2) relearning skills for design, manufacture and assembly and 3) scarce manufacturing resources able to cope with 'yesterday's' technology. This last is the critical one, as building large pressure vessels (or boilers to you) suitable for the stresses of railway operation have been almost extinct in Europe for 40-50 years. The boiler is the largest component on the loco, and the financial commitment to a single supplier without any fall-back exposes the project to risk. The Trust is being very cautious about selecting the supplier and making this commitment. For more info on the A1 Trust, go to a1steam.com.

The 3rd Generation steam, as proposed by Porta, Wardale et al would be cutting edge and subject possibly to even greater risk. But it may be possible to adapt other technologies (ship and power stations) to new methods of steam generation. Wardale's work in SA showed what could be done, and the Swiss have built smaller locos that outperform diesels on a number of fronts. This avenue shouldn't be neglected, if only to keep a second string to the internal combustion engine. But all new technology and machinery is initially expensive and runs considerable business risks.

So this is why Heritage Railways in the UK prefer to restore and maintain existing locos - the boiler is there already! Of course they have a limited lifespan but with care in use and maintenance they can last a surprisingly long time. I don't know what locos are available for returning to steam in the US and Canada, but my personal preference is for Berkshires, Hudsons and Northerns. The sight of a GNR S2 pounding away across plains would be quite tear-jerking! Isn't there one stuffed and mounted somewhere in the North-west?

[Overmod]

If it could be just one, and that one would be a historic reproduction, I'd have to vote for the NYC J1e (5345 being the next available number).

I wouldn't object to adding 'modern' thermodynamic improvements, better suspension and damping, etc. to the locomotive to improve its performance and reliability.

This locomotive would be admirably suited to many operating areas -- not too big and not too small, and with tight enough clearance to go places bigger engines couldn't.

If I were going to build new, I'd build a Withuhn-conjugated-duplex 4-8-4. NOT the ACE 3000, which was way too underpowered for its complexity, and would have overdriven its condenser in many actual railroad situations. Like the ACE, this would be a 180-degree-opposed 4-4-4-4 with inside rods between the pairs of main drivers. The Franklin type B (right down to cylinder and port dimensions!) on the TCRR's legacy 2-8-0 could be cloned nicely to fit.

I do assume that any 'new-again steam' would be used for 'enthusiast service' and not for freight railroading. I have been assured by more than one person in Virginia that the insurance situation is not insoluble, and that good business models for steam operation do exist.

[Overmod]

If it could be just one, and that one would be a historic reproduction, I'd have to vote for the NYC J1e (5345 being the next available number).

I wouldn't object to adding 'modern' thermodynamic improvements, better suspension and damping, etc. to the locomotive to improve its performance and reliability.

This locomotive would be admirably suited to many operating areas -- not too big and not too small, and with tight enough clearance to go places bigger engines couldn't.

If I were going to build new, I'd build a Withuhn-conjugated-duplex 4-8-4. NOT the ACE 3000, which was way too underpowered for its complexity, and would have overdriven its condenser in many actual railroad situations. Like the ACE, this would be a 180-degree-opposed 4-4-4-4 with inside rods between the pairs of main drivers. The Franklin type B (right down to cylinder and port dimensions!) on the TCRR's legacy 2-8-0 could be cloned nicely to fit.

I do assume that any 'new-again steam' would be used for 'enthusiast service' and not for freight railroading. I have been assured by more than one person in Virginia that the insurance situation is not insoluble, and that good business models for steam operation do exist.

[Anonymous]

I think the idea was a new steamer that wasn't saved, due to mismanagement, what have you. Cab-forward, Big Boys still exist. The MILW saved 2 S-3 class 4-8-4s and one 4-6-0, the type that ran the last steam powered revenue mile in 1957. That means none of the wonderful S1, S2, or any F series 4-6-2 or 4-6-4 were saved. Or how about Soo N-20 4-8-2s or O-20 4-8-4s? C&NW H class 4-8-4s, as rebuilt? These days, with the mainlines so busy, it might be better to have a lighter engine to run on a lightly used branch, instead of just sitting.

[Anonymous]

I think the idea was a new steamer that wasn't saved, due to mismanagement, what have you. Cab-forward, Big Boys still exist. The MILW saved 2 S-3 class 4-8-4s and one 4-6-0, the type that ran the last steam powered revenue mile in 1957. That means none of the wonderful S1, S2, or any F series 4-6-2 or 4-6-4 were saved. Or how about Soo N-20 4-8-2s or O-20 4-8-4s? C&NW H class 4-8-4s, as rebuilt? These days, with the mainlines so busy, it might be better to have a lighter engine to run on a lightly used branch, instead of just sitting.

[Anonymous]

I think one of the smaller (non articulated) designs of famous heritage. NYC Hudsons, Pennsy M1's, or Nickle Plate Berkshires would be amazing to see working again.

[Anonymous]

I think one of the smaller (non articulated) designs of famous heritage. NYC Hudsons, Pennsy M1's, or Nickle Plate Berkshires would be amazing to see working again.

[Willy2]

The Union Pacific Big Boy would be my first choice but any steam locomotive would be good too. I think it would be very interesting to see a replica of the Tom Thumb too.

Willy

[Willy2]

The Union Pacific Big Boy would be my first choice but any steam locomotive would be good too. I think it would be very interesting to see a replica of the Tom Thumb too.

Willy

[Anonymous]

QUOTE: Originally posted by mike157

Better than new would be for every RR museum to bring one dead Loco back to life.

JUST ONE ? How about more. How about all of them. Both steam and diesel. [:)] Works for me. [:D] [:)] And then when the railroads have a power shortage . . . hummmmmmmm. What color and spice there would be. ALCO fans would be dancing in the streets. [:)]

[Anonymous]

QUOTE: Originally posted by mike157

Better than new would be for every RR museum to bring one dead Loco back to life.

JUST ONE ? How about more. How about all of them. Both steam and diesel. [:)] Works for me. [:D] [:)] And then when the railroads have a power shortage . . . hummmmmmmm. What color and spice there would be. ALCO fans would be dancing in the streets. [:)]

[mike157]

Better than new would be for every RR museum to bring one dead Loco back to life.

[mike157]

Better than new would be for every RR museum to bring one dead Loco back to life.

[Anonymous]

the Ultimate Steam page has an article discussing design concepts for a multi- stage steam turbine locomotive rated at 15,000 hp! I'd love to see that.....it'll never happen though, especially as the proposal calls for a nuclear reactor to heat the boiler!