C&NW was hurting financially at that time, and I suspect they got a deal on their SD60s as they were a SOO order that they couldn't afford at the time. GEs were cheaper after that...
I can't explain what happened with CSX. They bought one small order of SD60s and then GEs thereafter. Price again?
The SD50 was the one with vibration issues as they were set at 950 RPM, though later most were derated to 930 RPM and lately 900 RPM as SD40-2 equivilents.
Someone please refresh my memory, which EMD was it that would sit there idling and shaking like a dog just out of water? Up until then I didn't think EMD could make a bad locomotive.
.
I think Preston Cook said in Trains once that a major issue at EMD during this transition time from the Dash 2 era was how long EMD had stuck with their successful product lineup.
By the time they decided to replace it and introduce a new model line, much of the engineering staff that was experienced with past model introductions had retired or moved on to new horizons.
Left was an engineering base that predominantly had never designed and brought to life a new model line of locomotives, after so many years of living off the laurels of EMD's GP38/SD40/GP40 line and the subsequent Dash 2 versions.
Faced with an almost impossible task to live up to expectations set by what many consider the greatest locomotive design of all time with the SD40-2, they naturally faltered.
Customers accustomed to problem-free EMD's suddenly didn't have a great memory and had no patience to see the teething troubles out, with several notables leaving the fold at this time and others upping the percentage of GE's being bought.
NorthWest While the SD50s and GP50s had crankshaft and electrical system issues, the SD60s were great locomotives.
While the SD50s and GP50s had crankshaft and electrical system issues, the SD60s were great locomotives.
Yet it was the SD60's that soured CSX on EMD's, after being reasonably pleased with the SD50's. That's a relationship that La Grange has yet to really restore, with just small orders a few times since then.
C&NW is another one that was less than pleased, at least in the service they were initially intended for. Despite a very unpleasant experience with seven U30C's in the 70's, they switched to GE in the wake of their SD60 order (Although the relationship couldn't of been damaged too badly, since if they had remained independent for a bit longer, SD80MAC's were in their future).
NorthWest While the SD50s and GP50s had crankshaft and electrical system issues, the SD60s were great locomotives. GE just beat out EMD/GM on financing as they were a much stronger company at the time. EMD just never got back ahead.
While the SD50s and GP50s had crankshaft and electrical system issues, the SD60s were great locomotives. GE just beat out EMD/GM on financing as they were a much stronger company at the time. EMD just never got back ahead.
This, THIS, A Thousand times this. EMD stumbles with the superseries, but GE Financial Services is what beat them. GE was offering a cheaper up front cost and in house financing. It was cheaper to get lots of new dash 8s and 9s compared to SD60s and SD70s. GM was less incented to keep up and had a bit of an innovator's dilema, because they're expensive up front, but cheap and easy to maintain model had worked for so long.
I know plenty of partisan engineers for various specific locomotives, EMD's cab's if nothing else spent some time being pretty loud and undesirable, but everything I've heard says that's no longer an issue at all.
K. P. Harrier The SD40-2 was the last great locomotive EMD built. General Motors, parent of EMD, started having major problems in the 1970’s selling cars (junkmobiles), and because of stupidity lost market share bigtime. Everybody had to tighten their belts, and EMD was no exception. They started selling junk and they lost market share with diesels too. The thought that EMD units are great is a pipedream. A contact recently was the engineer of a new SD70ACe (NOT the “-T4”). He said it was junk! Can you image a new locomotive being junk? Simply put, CAT has its work cut out for them as the new owner of EMD (or whatever it’s called now). Railfans that marvel at EMD are making fools of themselves, because EMD’s ARE junk, and those in the know absolutely know that. It is unknown if CAT can restore EMD to greatness, but in their trying it really has its work cut out for them. But, all eyes are now watching them …
The SD40-2 was the last great locomotive EMD built. General Motors, parent of EMD, started having major problems in the 1970’s selling cars (junkmobiles), and because of stupidity lost market share bigtime. Everybody had to tighten their belts, and EMD was no exception. They started selling junk and they lost market share with diesels too.
The thought that EMD units are great is a pipedream. A contact recently was the engineer of a new SD70ACe (NOT the “-T4”). He said it was junk! Can you image a new locomotive being junk?
Simply put, CAT has its work cut out for them as the new owner of EMD (or whatever it’s called now). Railfans that marvel at EMD are making fools of themselves, because EMD’s ARE junk, and those in the know absolutely know that. It is unknown if CAT can restore EMD to greatness, but in their trying it really has its work cut out for them. But, all eyes are now watching them …
As someone who works with later EMDs all the time I have to disagree on the performances. A SD70/75/M-2 is noticeably superior to a Dash-8/9 or ES44DC. The respond faster (loading time) and dig in better (wheelslip control). The wheelslip control on a GE likes to drop the load to almost zero when it detects a slip, while keeping the diesel engine revved up. The load usually drops just long enough for the locomotive(s) to roll back against the train (bunching slack up), and then the computer throws it all back on and yanks the slack out, which an excellent recipe for a broken knuckle/drawbar unless the Engineer catches it right away. GEVO's are far superior to a Dash-9, but still drop their load in many conditions where an EMD will keep pulling steadily. As CN only has 4 SD70ACe's I haven't yet gotten the chance to ride one, but from talking with a couple other guys who have they sound noticeably smoother than an ES44AC, and are at least on par with them.
But having said that I agree with the other factors mentioned here like marketing and financing.
Greetings from Alberta
-an Articulate Malcontent
This is what happens when the accountants take over. No offense to any accountants out there, but it seems to be true in any business or industry.
Another poster said it a lot better than I could...
"Professionals know that sometimes you have to spend money to make money. Accountants think you make money by NOT spending money."
And the US auto industry? Look at it this way, they had a thirty year free ride after World War Two. They got fat, dumb, and lazy and lost the competitive edge.
Quite the contrast compared to Alco-Altoona-Baldwin-Hillyard-Lima-Roanoke-Sacramento in the days of steam, it would seem.
----------------------------------------------------------------------------------------------------------------------------------- K.P.’s absolute “theorem” from early, early childhood that he has seen over and over and over again: Those that CAUSE a problem in the first place will act the most violently if questioned or exposed.
Did not having a suitable product for sale to US railraods for 2+ years damage their reputation? Did being owned by a hedge fund after GM sold the division that sucked all the money possible out of the operation before selling it damage their ability to compete with GE on financing terms during that period of ownership? During the pre-Staggers years GM stopped looking at EMD as a cash cow, due to the declining financial status of the railroads and stopped investing in sufficient R&D to keep the engineering side of the division advancing. Even after Staggers, the reputation of railroads in financial communities was in the doldrums; even the mood on the carriers themselves was in the doldrums - (how much track can we abandon today) and thus didn't warrant big R&D expenditures to satisfy a declining market.
Never too old to have a happy childhood!
Why is EMD slipping? Did something cause their downfall? Are workers being layed off?
It seems some crews prefer EMD over GE.
JEREMY CENTANNIGE ended up taking the lead in the late -7, early-8 era and has not looked back.
We all know the SD50 had issues. We know the SD40-2 has been a stalwart of railroading since its introduction.
GE ended up taking the lead in the late -7, early-8 era and has not looked back.
I want to know from the people that built(build) them, ran(run) them or worked(work) on them where it all went so wrong from the EMD side.
Only thing I have ever heard about a -9 is its junk. Most -8s have been pushed to the way side as well. Then we see the NS miracle and someone is serious about actually doing full rebuilds on GEs.
Input and opinions welcome.
Our community is FREE to join. To participate you must either login or register for an account.