Trains.com

Rumors, myths, urban legends??

5023 views
63 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2004
  • 4,115 posts
Rumors, myths, urban legends??
Posted by tatans on Tuesday, January 24, 2006 2:32 PM
I remember hearing a story in my childhood (300 years ago) of heavy freight pulled by steam engine on the prairies coming into town downhill very fast and locking the brakes after hitting a farm truck and skidding a considerable distance down the track with ALL the wheels locked, after the train stopped it was unable to move again as all the wheels had huge flat spots and the train couldn't regain any traction. Can there be any truth to this or is this an urban legend ? ?
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, January 24, 2006 3:36 PM
QUOTE: Originally posted by tatans

I remember hearing a story in my childhood (300 years ago) of heavy freight pulled by steam engine on the prairies coming into town downhill very fast and locking the brakes after hitting a farm truck and skidding a considerable distance down the track with ALL the wheels locked, after the train stopped it was unable to move again as all the wheels had huge flat spots and the train couldn't regain any traction. Can there be any truth to this or is this an urban legend ? ?


Must be an urban legend. I don't think there were towns with freight service out on the prairies 300 years ago, let alone train tracks running between them.
  • Member since
    November 2005
  • From: NYNH&H Norwich & Worcester MP21.7
  • 774 posts
Posted by David_Telesha on Tuesday, January 24, 2006 4:29 PM
So long as you being sarcastic about the 300 years ago part, yes.

Locking brakes and sliding will cause flat spots in steel wheels.
David Telesha New Haven Railroad - www.NHRHTA.org
  • Member since
    March 2004
  • From: Indianapolis, Indiana
  • 2,434 posts
Posted by gabe on Tuesday, January 24, 2006 5:20 PM
QUOTE: Originally posted by tatans

I remember hearing a story in my childhood (300 years ago) of heavy freight pulled by steam engine on the prairies coming into town downhill very fast and locking the brakes after hitting a farm truck and skidding a considerable distance down the track with ALL the wheels locked, after the train stopped it was unable to move again as all the wheels had huge flat spots and the train couldn't regain any traction. Can there be any truth to this or is this an urban legend ? ?


I am quite sure it is true, as I am told this problem has happened more than once.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, January 24, 2006 5:29 PM
the name of the game when it comes to airbrakes is adhesion. to much air pressure used in the airbrakes the wheels will lock up and as a result the wheels will slide. to little air pressure and you will not get enough force out of the brake shoes to stop the train. as you can imagine a 100 years ago there was a lot of trial and error that accured when the railroads tried to get the air pressure right. so i would say yes this did happen, just not 300 years ago.
  • Member since
    January 2005
  • From: Duluth,Minnesota,USA
  • 4,015 posts
Posted by coborn35 on Tuesday, January 24, 2006 6:42 PM
I have heard of drivers locking up, but not cars......they probably can though.

Mechanical Department  "No no that's fine shove that 20 pound set all around the yard... those shoes aren't hell and a half to change..."

The Missabe Road: Safety First

 

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, January 24, 2006 6:48 PM
So do railroads have any problem now-a days with flat spots on wheels when the emergency brake is applied?
  • Member since
    September 2002
  • From: US
  • 383 posts
Posted by CG9602 on Tuesday, January 24, 2006 7:35 PM
QUOTE: Originally posted by Lotus098

So do railroads have any problem now-a days with flat spots on wheels when the emergency brake is applied?

They certainly do. Any time you hear a train pass you by, you might hear a unique thunk-thunk-thunk-thunk, or rapid (depending on the speed) bang-bang-bang-bang. One of the possible sources of that sound is a wheel with a flat spot.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, January 24, 2006 7:59 PM
While we're on the subject of (railroad) rumors, myths, and urban legends.........................

(Never fear, no flaming here......)

There is a story in one of those Little House books about the CNW trying to buck some pretty deep snow filled cuts to reopen the line back in the 1880's. The story as related says the Superintendent of the railroad took the controls of the lead engine pushing a flatcar mounted snow plow after the engineer declined to do so. They (the superintendent and an engineer in a second locomotive) backed up a mile or so, pulled full throttle, and hit the train-high drift head on. After the resultant snow shower cleared, they found the lead engine stuck fast completely encapsulated in a foot thick layer of ice, and they had to chop a hole in the ice just to get to the cab.

Can anyone ascertain from records that this event actually took place as told, or is it simply artistic license at play?
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, January 24, 2006 8:42 PM
QUOTE: Originally posted by Lotus098

So do railroads have any problem now-a days with flat spots on wheels when the emergency brake is applied?


yes. any empty car has a tendency to slide its wheels when an emgerency application occurs on a moving trian. empty grain trains and empty coal trains and empty bare table trains are very bad at sliding wheels. there are sincsors on cars the help prevent the sliding of wheels, but these sinsors are relatively new and not on older cars.
  • Member since
    March 2004
  • 913 posts
Posted by mersenne6 on Tuesday, January 24, 2006 8:58 PM

I don't know about not being able to get going but you can flatten the wheels with an emergency stop to the point where the ride is extremely rough. In his book No Royal Road, Custer recounts his wild stop at Greensburg, Pa. where he slammed on the brakes for the entire passenger train. "Most of the wheels were flattened, and the rest of the run was like running over a corduroy road."
  • Member since
    November 2003
  • From: West Coast
  • 4,122 posts
Posted by espeefoamer on Tuesday, January 24, 2006 9:26 PM
QUOTE: Originally posted by mersenne6


I don't know about not being able to get going but you can flatten the wheels with an emergency stop to the point where the ride is extremely rough. In his book No Royal Road, Custer recounts his wild stop at Greensburg, Pa. where he slammed on the brakes for the entire passenger train. "Most of the wheels were flattened, and the rest of the run was like running over a corduroy road."

Reminds my of the time Lucy pulled the emergency brake on the City of Los Angeles Each time she did this,Fred dumped soup all over himself.
Ride Amtrak. Cats Rule, Dogs Drool.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, January 24, 2006 9:57 PM
QUOTE: Originally posted by CG9602

QUOTE: Originally posted by Lotus098

So do railroads have any problem now-a days with flat spots on wheels when the emergency brake is applied?

They certainly do. Any time you hear a train pass you by, you might hear a unique thunk-thunk-thunk-thunk, or rapid (depending on the speed) bang-bang-bang-bang. One of the possible sources of that sound is a wheel with a flat spot.


A few years ago i was on a Califorina Zephyr going to truckee and the car we were in had a flat spot the whole trip it was Thunk-thunk-thunk-thunk-thunk, it was fun[V]
  • Member since
    March 2004
  • From: Indianapolis, Indiana
  • 2,434 posts
Posted by gabe on Wednesday, January 25, 2006 7:17 AM
QUOTE: Originally posted by futuremodal

While we're on the subject of (railroad) rumors, myths, and urban legends.........................

(Never fear, no flaming here......)

There is a story in one of those Little House books about the CNW trying to buck some pretty deep snow filled cuts to reopen the line back in the 1880's. The story as related says the Superintendent of the railroad took the controls of the lead engine pushing a flatcar mounted snow plow after the engineer declined to do so. They (the superintendent and an engineer in a second locomotive) backed up a mile or so, pulled full throttle, and hit the train-high drift head on. After the resultant snow shower cleared, they found the lead engine stuck fast completely encapsulated in a foot thick layer of ice, and they had to chop a hole in the ice just to get to the cab.

Can anyone ascertain from records that this event actually took place as told, or is it simply artistic license at play?


I remember reading that as well. Even at the tender age of 7, I was flinching, for I knew the likely outcome. I distinctly remember thinking, this sounds like a bad idea, maybe the snow got to his sanity.

Gabe
  • Member since
    June 2004
  • From: roundhouse
  • 2,747 posts
Posted by Randy Stahl on Wednesday, January 25, 2006 7:55 AM
QUOTE: Originally posted by futuremodal

While we're on the subject of (railroad) rumors, myths, and urban legends.........................

(Never fear, no flaming here......)

There is a story in one of those Little House books about the CNW trying to buck some pretty deep snow filled cuts to reopen the line back in the 1880's. The story as related says the Superintendent of the railroad took the controls of the lead engine pushing a flatcar mounted snow plow after the engineer declined to do so. They (the superintendent and an engineer in a second locomotive) backed up a mile or so, pulled full throttle, and hit the train-high drift head on. After the resultant snow shower cleared, they found the lead engine stuck fast completely encapsulated in a foot thick layer of ice, and they had to chop a hole in the ice just to get to the cab.

Can anyone ascertain from records that this event actually took place as told, or is it simply artistic license at play?
Quite true, The Tracy cut is still a problem in severe storms today.
Randy
  • Member since
    July 2003
  • 964 posts
Posted by TH&B on Wednesday, January 25, 2006 8:55 AM
What about the story about a "lashup" of 6 or so units with a short light train, with one unit accidently in reverse. The first time i heard it the train traveled clear across the transcontinental without anyone noticing the wheels turning cackwards on a trailing unit, the hp to weight beig to high to notice. Then I later heard the same story but only across the whole subdivision. Could this trip realy have lasted more then a mile or so before SOMEBODY noticed?? or maybe a few miles before ot DERAILED??
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, January 25, 2006 10:09 AM
QUOTE: Originally posted by mersenne6


I don't know about not being able to get going but you can flatten the wheels with an emergency stop to the point where the ride is extremely rough. In his book No Royal Road, Custer recounts his wild stop at Greensburg, Pa. where he slammed on the brakes for the entire passenger train. "Most of the wheels were flattened, and the rest of the run was like running over a corduroy road."


THAT was the part of the story that got my attention, the flat spots allegedly immobilizing the engine.

I can see the flat spots making it "inadvisable" to drive the train out, but the claim that it resultingly was UNABLE to gain traction seems like a pantload.

  • Member since
    January 2002
  • 229 posts
Posted by Ham549 on Wednesday, January 25, 2006 10:19 AM
It can happen see.
Save the F40PH!
  • Member since
    March 2016
  • From: Burbank IL (near Clearing)
  • 13,540 posts
Posted by CSSHEGEWISCH on Wednesday, January 25, 2006 10:22 AM
I have read about the flat spots after locking up on a long downgrade, only this story is placed on the Orinoco Iron Mining line in Venezuela.

A variation on this story involves stalling in a tunnel but the locomotive's wheels kept turning and ground into the rail.
The daily commute is part of everyday life but I get two rides a day out of it. Paul
  • Member since
    June 2004
  • From: Over yonder by the roundhouse
  • 1,224 posts
Posted by route_rock on Wednesday, January 25, 2006 1:47 PM
Flat spots happen still to this day. What sensors on new cars? is my first question. As I have never seen them.
Second the one unit in reverse is an urban legend.Alarm bells would be going off if you put in a reverser and attempted to move it into a different position.

Yes we are on time but this is yesterdays train

  • Member since
    March 2003
  • From: Central Iowa
  • 6,901 posts
Posted by jeffhergert on Wednesday, January 25, 2006 2:49 PM
QUOTE: Originally posted by route_rock

Flat spots happen still to this day. What sensors on new cars? is my first question. As I have never seen them.
Second the one unit in reverse is an urban legend.Alarm bells would be going off if you put in a reverser and attempted to move it into a different position.

I think the sensor he is referring to is the load/empty sensor. It's been a while since i've read about them, but I think it's supposed to vary to braking force applied depending on the weight of the car (loaded or empty) to reduce wheels from sliding.

As to one engine trying to go opposite from the rest, it is possible on Distributed Power to set it up incorrectily and have the remote unit(s) try to go opposite from the lead. There is a switch that is positioned "Lead or Same as Head End" for the remote engine when facing the same way as the lead (controlling) engine or "Opposite from Head End" if the remote engine is facing opposite. If this isn't placed right you could have problems or, as I've heard happened, the switch wasn't wired correctly when it was installed.
Jeff
  • Member since
    December 2001
  • From: Northern New York
  • 25,026 posts
Posted by tree68 on Wednesday, January 25, 2006 3:32 PM
QUOTE: Originally posted by coborn35

I have heard of drivers locking up, but not cars......they probably can though.

Think about the relative surface contact area - brake shoes vs rail. As soon as the coefficient of friction between the wheel and the rail drops below the coefficient of friction between the wheel and the brake shoe, the wheel will slide. Given enough weight on the wheel, that crossover may not occur.

Sorry, no numbers to crunch there - well beyond my resources....

LarryWhistling
Resident Microferroequinologist (at least at my house) 
Everyone goes home; Safety begins with you
My Opinion. Standard Disclaimers Apply. No Expiration Date
Come ride the rails with me!
There's one thing about humility - the moment you think you've got it, you've lost it...

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, January 25, 2006 5:33 PM
QUOTE: Originally posted by jeffhergert

QUOTE: Originally posted by route_rock

Flat spots happen still to this day. What sensors on new cars? is my first question. As I have never seen them.
Second the one unit in reverse is an urban legend.Alarm bells would be going off if you put in a reverser and attempted to move it into a different position.

I think the sensor he is referring to is the load/empty sensor. It's been a while since i've read about them, but I think it's supposed to vary to braking force applied depending on the weight of the car (loaded or empty) to reduce wheels from sliding.

As to one engine trying to go opposite from the rest, it is possible on Distributed Power to set it up incorrectily and have the remote unit(s) try to go opposite from the lead. There is a switch that is positioned "Lead or Same as Head End" for the remote engine when facing the same way as the lead (controlling) engine or "Opposite from Head End" if the remote engine is facing opposite. If this isn't placed right you could have problems or, as I've heard happened, the switch wasn't wired correctly when it was installed.
Jeff


Bump test em!
  • Member since
    May 2005
  • From: S.E. South Dakota
  • 13,569 posts
Posted by Murphy Siding on Wednesday, January 25, 2006 10:12 PM
QUOTE: Originally posted by Randy Stahl

QUOTE: Originally posted by futuremodal

While we're on the subject of (railroad) rumors, myths, and urban legends.........................

(Never fear, no flaming here......)

There is a story in one of those Little House books about the CNW trying to buck some pretty deep snow filled cuts to reopen the line back in the 1880's. The story as related says the Superintendent of the railroad took the controls of the lead engine pushing a flatcar mounted snow plow after the engineer declined to do so. They (the superintendent and an engineer in a second locomotive) backed up a mile or so, pulled full throttle, and hit the train-high drift head on. After the resultant snow shower cleared, they found the lead engine stuck fast completely encapsulated in a foot thick layer of ice, and they had to chop a hole in the ice just to get to the cab.

Can anyone ascertain from records that this event actually took place as told, or is it simply artistic license at play?
Quite true, The Tracy cut is still a problem in severe storms today.
Randy



futuremodal: That would be on the DM&E now. A few years back, when we had a rough winter, the local paper did a big article about the DM&E snowplow crew working over that line to keep it open.

Thanks to Chris / CopCarSS for my avatar.

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, January 26, 2006 8:15 PM
Great!

Now, what about the claim that Milwaukee electrics going downhill with the regenerative braking could power an uphill train of the same size?
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, January 26, 2006 8:34 PM
The original Westinghouse Air Brake was founded in 1869 by George Westinghouse shortly after he successfully demonstrated the first straight air brake systems to the railroad industry. Three years later, Westinghouse developed the first automatic air brake system, which had a built-in safeguard whereby the brakes on the entire train would apply automatically if the train should separate or if air pressure should escape due to leakage in the system. This system was first installed on a Pennsylvania Railroad passenger train in Pittsburgh in 1872, and its efficiency dramatically improved the safety and popularity of rail transportation in North America.

taken from wabtecs site to put the three hundred year thing to rest. And 6 lash up one wrong way is not a DP scenario. although a dp unit can definately be set up to go the oppisite direction. In order for the six unit going wrong way with one someone would have to create this situation theres just not enough loop holes to have it happen otherwise .....you have to miss mu'ing the engine have the engine to run backwards set up independantly and not part of the consist and have someone actualy release its breaks move the reverser etc etc... just not plausible even.
  • Member since
    December 2001
  • From: Northern New York
  • 25,026 posts
Posted by tree68 on Thursday, January 26, 2006 9:52 PM
QUOTE: Originally posted by futuremodal

Great!
Now, what about the claim that Milwaukee electrics going downhill with the regenerative braking could power an uphill train of the same size?

Physically impossible - Even if a train going downgrade theoretically generates enough power to supply an equally sized upgrade train, line losses would mean the upgrade train wouldn't have quite enough power to do the job. The downgrade train would have to generate more power than the upgrade train needed....

I think we had a thread about dynamic braking here a while back, but I don't remember if numbers were discussed. A lot would depend on the relative efficiencies of the traction motors as motors or generators.

But everything I've read about them says that they did definitely use regenerative braking, so even if it wasn't one for one, it still wanders toward the idea of perpetual motion.

LarryWhistling
Resident Microferroequinologist (at least at my house) 
Everyone goes home; Safety begins with you
My Opinion. Standard Disclaimers Apply. No Expiration Date
Come ride the rails with me!
There's one thing about humility - the moment you think you've got it, you've lost it...

  • Member since
    December 2005
  • From: MP 32.8
  • 769 posts
Posted by Kevin C. Smith on Friday, January 27, 2006 1:44 AM
QUOTE: Originally posted by CSSHEGEWISCH

I have read about the flat spots after locking up on a long downgrade, only this story is placed on the Orinoco Iron Mining line in Venezuela.

A variation on this story involves stalling in a tunnel but the locomotive's wheels kept turning and ground into the rail.


Way back when, TRAINS had an article on US Army Alco's that were modified to work the Iranian State Railways during WWII to increase Lend-Lease supplies to Russia. There was a photo of some rails with deep indents ground into them by slipping locomotive wheels. Apparently long hours and desert heat caught up with the head end crew, who fell asleep and didn't notice their train had stalled while the wheels were still turning. By the time they awoke, the wheels had worn almost through the head and into the rail web.
"Look at those high cars roll-finest sight in the world."
  • Member since
    December 2004
  • From: WSOR Northern Div.
  • 1,559 posts
Posted by WSOR 3801 on Friday, January 27, 2006 3:51 AM
Or the shop could hook up a traction motor backwards. It gets unhooked from the engine and hooked up to a welder to turn the wheelset when machining the wheel. Sombody didn't hook it back up right. :( Went 20 miles, tripping ground relay, etc., before the problem was fully known. Cut out the motor, go on your way.

Mike WSOR engineer | HO scale since 1988 | Visit our club www.WCGandyDancers.com

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, January 27, 2006 4:00 AM
There is some truth to the electric legend - some rail systems have used regenerative braking in trains going downhill to provide some of the power for trains climbing. They certainly don't provide all the power, but over a year or so it would cut down the electricity bills dramatically.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy