cx500 Perhaps forgotten by many, even here in the steam era headlights were often turned off during daylight hours. Their constant use started with diesels. I presume the trains were no longer as visible without the plume of exhaust from the steam engine. So even this side of the Atlantic you can see that a major purpose of the headlight was visibility by others. In Britain, with a controlled right of way, this was not an issue
Agree, "a major purpose of the headlight was visibility by others..." , but come nighttime, another major purpose of said headlight would be to see ahead. In fact, most engines for decades now, have twin sealed beam lights or equivalent....{very strong ones}, and now even ditch lights.
And yes, I too remember when steamers did not use their light during daytime operation.
Quentin
First in america, we feel the need for dual headlights on our vacuum cleaners. So our perspective is biased.
Now to the issue of trains. At any higher speed, the lights are only useful to be seen, not to see. When going 50mph, by the time you would see something, it's too late to do anything about it. Headlights are the most useful in restricted speed operations (yards, switching industries, etc). But it is a PITA when an engineer leaves them on when you're on the ground trying to throw switches or couple cars.
The original canadian ditchlights were used to light up ditches. That's why they were "cross-eyed". Today's ditchlights are actually "axillary" or "crossing" lights. And they are almost never aimed properly, half the time shining up into the trees. They are also usually covered in grime since no one ever seems to take the time to polish them up (I did when I was on the road).
the yard I work with has some lighting, not enough to be bright, but more than enough you don't really need the headlights on the engines to see the switches or other cars.
It's been fun. But it isn't much fun anymore. Signing off for now.
The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any
As to using headlights by day in this country, I have a memory (I still have not located my copy of the 1943 Southern Railway Bible, which gave me my first knowledge of various rules that are standard) that more than sixty years ago, the locomotive headlight was to be on bright at all times when under way, and was to be dimmed only when in a siding.
The 1950 Rock Island Bible (Rule 17) states that the headlight is to be dimmed only when a train is entirely clear of the main and is moving on the siding (and is to be extinguished entirely when the train is stopped on the siding), when approaching or passing head end and rear end of trains and engines standing or moving on adjacent tracks, approaching signals indicating train orders, when standing on main track awaiting arrival of an opposing train, and when moving on sidings and other than main tracks, in clear of main track. The rule also definitely states that when approaching a public crossing at grade, the headlight is to be shining brightly--which indicates that the light is to give notice to the public that a train is coming.
If you are moving, the headlight is to be on bright if you are on the main at all, and it is to be extinguished only when you are stopped.
Of course, some rules were not standard on all railroads.
Johnny
wjstixHaving lived next to railroads for all my life, I can't really believe that the incredibly bright headlight doesn't help the engineer see ahead. Seems to me in my old house on the tracks that when a train was coming at night, the tracks would be lit up like by a floodlight for a block or more ahead of the engine. As noted, headlights, Mars lights etc. help people see the engine too. Ditch Lights aren't really meant to light up the ditches...older diesels had "ditch lights" that shone under the front and rear steps, largely to help crewmen getting on and off in the dark (although they did help light up the area a bit). Modern ditch lights are there to help make the engine more visible at grade crossings etc. much more than to help the crew see ahead. BTW British engines don't have bells either.
Having lived next to railroads for all my life, I can't really believe that the incredibly bright headlight doesn't help the engineer see ahead. Seems to me in my old house on the tracks that when a train was coming at night, the tracks would be lit up like by a floodlight for a block or more ahead of the engine.
As noted, headlights, Mars lights etc. help people see the engine too. Ditch Lights aren't really meant to light up the ditches...older diesels had "ditch lights" that shone under the front and rear steps, largely to help crewmen getting on and off in the dark (although they did help light up the area a bit). Modern ditch lights are there to help make the engine more visible at grade crossings etc. much more than to help the crew see ahead.
BTW British engines don't have bells either.
Looks bright when you're looking at it. But that light has to bounce off something out there, during which most of the light is scattered or absorbed, and what's left then comes back to the cab. Very little comes back to the cab. Ride a train at night, you'll see! (Or actually, NOT see.).
RWM
I do ride in the locomotive at night on occasion. At our speeds (30-40 max) you're not "overdriving" the lights, so they do a certain amount of good. Unfortunately(?) much of our line is so curvy that what's being lit up is the woods and the sides of the rock cuts...
I don't mind the ditch lights one bit when I'm walking to a remote switch in what would otherwise be total darkness, except for my lantern. Don't really want to meet a bear in the dark....
Walking back can be a pain, though. "6076 - can you kill those ditch lights for a minute?"
Larry Resident Microferroequinologist (at least at my house) Everyone goes home; Safety begins with you My Opinion. Standard Disclaimers Apply. No Expiration Date Come ride the rails with me! There's one thing about humility - the moment you think you've got it, you've lost it...
Airplane landing lights and locomotive headlights are some of the brighter lights one will see on a moving vehicle and the comparison between that and total darkness has to be wildly different.
Automotive headlight capability has drastically improved too for the better in the past decade. Super bright with some of the newer gas filled bulbs. Some ID'd by the bluish tint.
75 watt bulbs, with LED technology on the horizon.
When cruising, the lights aren't that good, considering the stopping distances of a train. They're fine for slower speed stuff, but on the main? Meh. Add in any type of rain/mist/fog/snow, and the glare is BAD in the cab, furthering reducing their usefulness.
Aircraft landing lights? Blind motorists? I can see the FHWA and FRA not going for that one.
Quentin, there is a fundamental fact of railroad operation that hardly anyone outside of the railroad understands, but it's crucial to understanding that highways and railways are not comparable. Cars proceed on roads based solely on what the driver can see, and the driver adjusts speed to make sure he can brake before he runs into something when it appears in his field of vision. Trains are 100% different out on the main track: they proceed based on what the dispatcher can see. The dispatcher is taking the responsibility for ensuring the track ahead is clear, and the train crew is placing 100% trust in him clearing the track ahead. Out on the main track, outside of yard limits, If the train crew had a display in its cab that told them where it was on the track, and what curves, grades and mileposts were coming up, so it knew when to apply brakes and when to speed up for track curve and grade condition, you could practically paint over the cab windows for all the good they do. (And the PTC systems currently being deployed actually do put that display into the cab.)
The window lets you see the grade-crossings ahead so you can flinch, but rarely are you going to be able to stop the train short of the car that's stalled there.
I don't disagree with any of that.....but why on earth would one want to plow on in the dark..........? Headlights are available...in our modern age. And we certainly know they are needed to help the driving public know a train is active and slamming towards the crossing. And we know in addition to that, the public can see the flashing ditch lights that assist in that sighting.
RWM: I always wondered if the blackout rules for WWII caused the non use of headlights. Any of you Brits or continental Europeans know?
Here's a couple of pics I found on the web. If nothing else, it's a good reminder of how much brighter it is at night in the winter when there's snow on the ground as in the upper picture - part of the reason I like to set my model railroad in winter since I like to operate at night. Anyway, you can judge for yourself but to me I guess the headlight helps but only to a degree.
Knowing next to nothing about British steam, would these be considered class lights?
Video of Henry with lights can be seen here:
Flying Kipper
Matt from Anaheim, CA and Bayfield, COClick Here for my model train photo website
I would not call a steam engine headlight pathetic. I am a former engine driver and I can tell you most definitely, that you can read a newspaper by the light of a locomotive headlight on high beam 800 yards from the locomotive.
Regards, Malcolm.
wjstix Here's a couple of pics I found on the web
Those are great photos of vision out the windshield....That snow sure does reflect light.
.
..............Interesting story.
ModelcarI don't disagree with any of that.....but why on earth would one want to plow on in the dark..........? Headlights are available...in our modern age. And we certainly know they are needed to help the driving public know a train is active and slamming towards the crossing. And we know in addition to that, the public can see the flashing ditch lights that assist in that sighting.
Ah-ha! 4 pages and we've almost gotten you to the point!
So you've gotten that the point of American locomotive headlights is primarily to warn automobile traffic that there's a train, but as has been said a few times in this thread, British right of ways were much better separated from auto traffic and the public in general, and that's why they weren't needed!
In a nutshell, at least/
Go here for my rail shots! http://www.railpictures.net/showphotos.php?userid=9296
Building the CPR Kootenay division in N scale, blog here: http://kootenaymodelrailway.wordpress.com/
trainboyH16-44 Ah-ha! 4 pages and we've almost gotten you to the point! So you've gotten that the point of American locomotive headlights is primarily to warn automobile traffic
So you've gotten that the point of American locomotive headlights is primarily to warn automobile traffic
Funny.....I had to chuckle at those words....Yours, not mine.
My position is still as it was in the beginning....headlight{s}....both effective in the daylight, and absolutely useful at night....unless engineers enjoy blasting thru the dark and possibly wondering what's next....
ModelcartrainboyH16-44 Ah-ha! 4 pages and we've almost gotten you to the point! So you've gotten that the point of American locomotive headlights is primarily to warn automobile traffic Funny.....I had to chuckle at those words....Yours, not mine. My position is still as it was in the beginning....headlight{s}....both effective in the daylight, and absoutely useful at night....unless engineers enjoy blasting thru the dark and possibly wondering what's next....
My position is still as it was in the beginning....headlight{s}....both effective in the daylight, and absoutely useful at night....unless engineers enjoy blasting thru the dark and possibly wondering what's next....
Everyone has a right to stake out a position, and whether it's right or wrong is typically in the eye of the beholder. Mine is that when railways in Britain during the steam era determined that headlights were superfluous, they were 100% correct. It may be that the decision of British railways strikes others as weird, or not customary, or foreign, but I've looked at their logic and I'm not seeing a blunder.
Quentin, I appreciate your doggedness in this matter, because it incented me to look closely at a difference between U.S. and British railway practice to which I've never previously paid attention, and this particular example will be useful for me in my railway job as a striking illustration of the characteristics of and reasons for U.S. railway practices. It will be on one of my powerpoints sooner or later, saying something to the effect of, "U.S. railways were so crooked and sketchy compared to British railways that for years U.S. railway locomotives needed a headlight purely for the engineer to pick his way through the wilderness, while simultaneously British engine drivers blasted their express trains through the darkness without even a headlight, having complete confidence in entrusting the lives of their passengers and crew to the all-clear from the last signal box."
.....Sounds fair enough to me.
Our community is FREE to join. To participate you must either login or register for an account.