Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
QUOTE: Originally posted by Meyblc Tom, Thanks for the detailed explanation. I will give it a try again. I usually purchase my #5's in a bulk pack but they don't come with the coupler boxes. Just the couplers, brass springs and centering springs.
QUOTE: Originally posted by TomDiehl . frisco1519: if you have trouble with the coupler pocket clearance, the tabs that stick down from the spring can be clipped off for a bit more clearance. Also, the Athearn metal coupler pocket cover is notorious for having a rough edge where the coupler sticks out. File this smooth before installation. Also, check the edge of the plastic pocket for flash and remove if necessary. And yes, you can buy the box separately (they used to come with all but the bulk packs) http://www.kadee.com/htmbord/page148.htm
QUOTE: Originally posted by frisco1519 QUOTE: Originally posted by TomDiehl . frisco1519: if you have trouble with the coupler pocket clearance, the tabs that stick down from the spring can be clipped off for a bit more clearance. Also, the Athearn metal coupler pocket cover is notorious for having a rough edge where the coupler sticks out. File this smooth before installation. Also, check the edge of the plastic pocket for flash and remove if necessary. And yes, you can buy the box separately (they used to come with all but the bulk packs) http://www.kadee.com/htmbord/page148.htm Tom, Thanks for the help. That 85' flat car is the only one I have had problems with installing a number five and the centering spring. Everyone in our club has had the same problem. I have four more that I purchased yesterday and I will check the couple box a little closer before I install a Kadee. Thank you, George
QUOTE: Originally posted by Meyblc Ok.......I brought these couplers to work today and one of my coworkers was able to help me figure it out. Now I feel kind of stupid because it really isn't that difficult once you get the hang of it. Thanks to everyone for your help. Michael
Modeling B&O- Chessie Bob K. www.ssmrc.org