Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Primer for wood

1326 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
Moderator
  • Member since
    June 2003
  • From: Northeast OH
  • 17,255 posts
Primer for wood
Posted by tstage on Wednesday, June 7, 2023 10:28 PM

I have a can of Tamiya light gray fine primer.  On the label it states that it's "For plastic & metal".

Are there any reasons it would NOT be good to use on a wood laser kit - e.g. AMB caboose?

Thanks,

Tom

https://tstage9.wixsite.com/nyc-modeling

Time...It marches on...without ever turning around to see if anyone is even keeping in step.

  • Member since
    January 2004
  • From: Canada, eh?
  • 13,375 posts
Posted by doctorwayne on Wednesday, June 7, 2023 10:37 PM

I can't imagine that it would be detrimental on wood, but if you have a spare hunk of scrap wood, a little test should ease your concerns.

Wayne

  • Member since
    February 2001
  • From: Wyoming, where men are men, and sheep are nervous!
  • 3,392 posts
Posted by Pruitt on Wednesday, June 7, 2023 10:44 PM

Could be that the volatiles in the paint would be absorbed too fast into the wood grain and the pait won't cure correctly. Might make it behave more like a stain than a coat of pigment. If that's the case, a second or even a third coat might be needed to get paint-like coverage.

  • Member since
    February 2008
  • 8,907 posts
Posted by maxman on Thursday, June 8, 2023 1:25 AM

I googled your question and found a lot of info on wood primers including Tamiya. I didn’t read through all of it, but you might find more “professional“ opinions if you go the google route.

Moderator
  • Member since
    June 2003
  • From: Northeast OH
  • 17,255 posts
Posted by tstage on Thursday, June 8, 2023 7:55 AM

doctorwayne
...if you have a spare hunk of scrap wood, a little test should ease your concerns.

Oh, that was a given, Wayne.  I just wanted to know if there was something obvious that I wasn't seeing.

Pruitt
Could be that the volatiles in the paint would be absorbed too fast into the wood grain and the pait won't cure correctly. Might make it behave more like a stain than a coat of pigment. If that's the case, a second or even a third coat might be needed to get paint-like coverage.

Thanks, Mark.  Tamiya paint goes on very fine so I do plan on multiple light coats and letting it dry well before applying the top color coat.  I also want to do a test to make sure that the primary paint is compatible with the primer (and vise versa).

Tom

https://tstage9.wixsite.com/nyc-modeling

Time...It marches on...without ever turning around to see if anyone is even keeping in step.

  • Member since
    September 2003
  • 21,669 posts
Posted by Overmod on Thursday, June 8, 2023 11:32 AM

My practice in restoration was to use thinned primer as a first coat, then 'regular strength' once there were no more visible 'thin spots' of film starvation.

That ensures good bonding of the primer to the wood, and also a full area for bonding the topcoat to the primed surface.

Moderator
  • Member since
    June 2003
  • From: Northeast OH
  • 17,255 posts
Posted by tstage on Friday, June 9, 2023 10:18 PM

Sprayed a scrap piece of wood from the laser kit with primer and paint.  So far, so good.

The Tamiya primer I let dry overnight (12 hrs), sniffed it for odor in the morning (negliable) then sprayed the scrap with a single coat of Scalecoat I.  After 15 hrs the paint is still a wee bit tacky and has a slight odor.

I do not see any reaction - e.g. paint bubbling.  And the paint looks uniform.  Is it safe to say that the primer (for metal & plastic) and the paint are compatible with one another?  Or do I wait till it completely dries to call it good?

Thanks,

Tom

https://tstage9.wixsite.com/nyc-modeling

Time...It marches on...without ever turning around to see if anyone is even keeping in step.

  • Member since
    February 2003
  • 1,138 posts
Posted by MidlandPacific on Saturday, June 10, 2023 9:08 AM

You might want to spray the wood with a sanding sealer first.  This covers the wood with a thin layer of varnish-like material, which keeps the pores from absorbing the paint.  That reduces the number of coats you need to apply and ensures that the finish of the painted wood will more closely resemble the finish on, say, detail parts made of metal or plastic. YMMV, of course, and if you're satisfied with the results, there are always a couple ways to skin the cat.

http://mprailway.blogspot.com

"The first transition era - wood to steel!"

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!