Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

backdrops

840 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2003
  • From: Morgantown, WV
  • 1,459 posts
backdrops
Posted by cheese3 on Thursday, January 27, 2005 3:35 PM
any tips on making a backdrop

Adam Thompson Model Railroading is fun!

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, January 27, 2005 5:41 PM
there is a big article in the MR october 04 issue. you can probly find the article on the MR homepage. there is one article on how to do pho backdrops-they look pretty realistic
http://www.trains.com/Utilities/get_galleryfile.asp?idOLG={E2319672-0FA0-4A82-B602-003FDD17A535}1]
you can probobly find an articler here on painting backdrops too
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, January 27, 2005 5:55 PM
Here is a very easy tip on making a backdrop. Two easy ways.

A removeable one-
Use Woodpanel which is $7 a sheet and cut it in two pieces down the middle the long way using only a box cutter. They cut really easy and it is very flexible too. Paint the back of the sheet first whatever color you choose. Then if you layout is not a shelf style built into the wall you can make it removeable. Just go under the layout and where your base 2x3 or 2x4's are add a block of 2x3 by drilling a whole in it so it will not split when adding a 3" drywall screw. Place it at the base of the 2x4 and screw them in. They will all be the same hsght so no need to measure. Then after that ius done just place one of the sheets os 2'x8' of painted woodpanel on it and it will not go to the floor and be suspended up nicely. The backdrop will lean back very slightly.

If you want permanant do the same thing at the begininng but buy 1x3 wood and place the backdrop on the side of the2x4 and hold it straight. Then place the 1x3 with pre drilled holes for nonsplitting. and then just use drywal screws to each of the boards and boom your done. The woodpanel is very light and flexible so you will like it.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, January 27, 2005 6:47 PM
oh oops sorry that link didnt work. oh well, just go to the MR home page and go to the left and click on scenery and then click on "Photo Realistic Back drops" and there you go
  • Member since
    December 2003
  • From: Good ol' USA
  • 9,642 posts
Posted by AntonioFP45 on Monday, January 23, 2006 1:57 PM
I'm very impressed with the selection from http://www.backdropwarehouse.com

They are expensive, but I've seen a few come through Ebay. The company also has some bargains with lightly blemished backdrops that have minor imperfections.

The other option I was considering: Paint a blue sky, apply clouds with the spray can method using gray and white colors.

"I like my Pullman Standards & Budds in Stainless Steel flavors, thank you!"

 


  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, January 23, 2006 2:03 PM
Another option is to purchase printed paper backdrops, have them dry-mounted to foam board, then attach the foam board either to your benchwork or wall. If you are using the backdrop as a scenic divider its very important to use the Gator brand of foam board as it is much more rigid than other brands.
  • Member since
    August 2005
  • From: Southeast Texas
  • 2,392 posts
Posted by Tracklayer on Monday, January 23, 2006 2:04 PM
I did my own. As a matter of fact I started a topic about backgrounds yesterday.

Tracklayer
  • Member since
    May 2003
  • From: Morgantown, WV
  • 1,459 posts
Posted by cheese3 on Monday, January 23, 2006 2:20 PM
wow someone did some digging, this post is almost a year old!!! sense this post i have painted my own backdrop.

Adam Thompson Model Railroading is fun!

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, January 23, 2006 9:36 PM
mount a piece of plywood to the edge of your layout and use something like this http://www.sceneryexpress.com/products.asp?dept=1100&pagenumber=1&sort_on=&sort_by=
  • Member since
    February 2005
  • From: In the State of insanity!
  • 7,982 posts
Posted by pcarrell on Monday, January 23, 2006 9:55 PM
We just talked about this in some depth on the layouts page the other day. Here's a link;

http://www.trains.com/community/forum/topic.asp?TOPIC_ID=55494

Hope it helps.
Philip
  • Member since
    January 2005
  • From: springfield . Ma
  • 194 posts
Posted by Ibeamlicker on Monday, January 23, 2006 10:52 PM
bump

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!