MisterBeasleyRTR cars are fine with me, most of the time. But, I would advise checking wheel guage and coupler height and alignment, even new and out of the box.
I agree. Also check the rolling quality of the trucks and operation of the couplers. More than once I have had to work on the axle ends or even replace wheel sets. Couplers might need some graphite or even replaced.
Paul
Since EVERYTHING in my fleet must be painted and lettered for fictional railroads, I have very little experience with ready to run equipment.
.
I do have one RTR freight car, a Fox Valley boxcar that came factory painted for the Midland Road (Allegheny Midland), and I can tell you it was very high quality and honestly could be taken out of the box, set on the rails, and it looks as good as any of the custom built equipment I have.
I did apply some lighty weathering.
-Kevin
Living the dream.
I have built lots of kits from Accurail and Tichy and Bowser, but that's to get specific car types in specific roads or road numbers.
RTR cars are fine with me, most of the time. But, I would advise checking wheel guage and coupler height and alignment, even new and out of the box.
It takes an iron man to play with a toy iron horse.
kasskaboose Might I suggest going on the the HO swap site for model trains? The list others mentioned is what I follow. I also consider Atlas Trainman. Once you have what you want, consider using the below site. I do for any freight cars. https://groups.io/g/HOswap
Might I suggest going on the the HO swap site for model trains? The list others mentioned is what I follow. I also consider Atlas Trainman. Once you have what you want, consider using the below site. I do for any freight cars.
https://groups.io/g/HOswap
Brian,
I'd second this. I like that site quite a bit. You can find a good amount of quality RTR rolling stock for under $20 there. You've just got to keep an eye on it and jump when you see what you want. I bought a Trio of Atlas Evans boxes for around $10 each though they were the equivalent of their "trainman" cars. Nice paint, metal wheels, etc but they didn't have the separately applied ladders and such.
At train shows you can find a ton of good RTR styff for $10 or less, but generally that's going to be more of the Athearn Blue Box level of detail and I don't know if that's what you're is looking for. Look hard though, bargains abound if you look hard.
Best of luck with your foray into HO!
Visit the Chicago Valley Railroad for Chicago Trainspotting and Budget Model Railroading.
I get that!
Mike.
My You Tube
mbinsewiWe have to remember the OP is asking for RTR, out of the box, and on the track.
Yeah, I'm well aware of that, but I like to wander with the rest of the herd once in a while, too.
Wayne
We have to remember the OP is asking for RTR, out of the box, and on the track.
Ed's links were all fine, if that's your time period.
What we don't know is the OP's time period.
Unless they've discontinued the practice, Rapido offered a limited number of their releases as kits, both decorated and undecorated. The reefer shown below was built from one of their undecorated kits...
The best RTR with better details are Atlas (there are many grades of Atlas so be careful), Intermountain, proto 2000, Ertl (limited pain schemes and you have to change out the wheels but can be had cheap at times), Kadee. There are others but they can be pricy or hit and miss as to quality. All the ones I mentioned can be had at times for as little as $10 especially the Ertl and the Proto.
riogrande5761Asside from Accurail, and the affore mentioned Tangent (undec kits), Intermountain also offers undec kits - see the top of the list at the link:
Other non resin kit manufacturers include
Tichy Train Group
Bowser
LaBelle Woodworking (they also have the Ye Olde Huff n Puff line - not yet back in production)
B.T.S.
And probably some others I missed.
I had to check out your links, Ed, I have to chuckle, OK, but I guess time period has everything to do with it. Model Train Stuff took me right to page 17, and went backwards.
If those fit your time period, your in luck, possibly the 2 bay ACF hoppers on page 12, might fit mine, as I would be removing the lettering, and "patching", and just maybe a couple of 100 ton hoppers on page 12? might fit, once again lettering faded or gone, with a patch, but that's about it.
But I get your point, OK, yep, you can buy new cars for $20 or under, and I have no idea what the OP's time period is, but I'm guessing, that any one of those cars would fit his bill.
Thanks,
mbinsewiFrom ???? Auction sites? HOSwap? from the manufacturer? tell us more.
I looked at MB Klein, out of curiosity, and out of 50 pages of HO freight cars (some kits mixed in there) I got to page 17 before the price topped $20.
https://www.modeltrainstuff.com/trains/freight-cars/#/filter:custom_scale:HO/sort:calculated_price:asc
TrainWorld might be another source and the Walthers Sale Flyer and Bargain Depot. Bowser does a weekend sale where there are many RTR bargains, too. Deals are out there, you just have to look around.
https://www.walthers.com/products/on-sale-today/bargain-depot-all-on-sale-the-warehouse-sale
It doesn't hurt to get on the mailing lists of a few of these higher volume sellers and when they have a "closeout" sale you can reap the savings.
Good Luck, Ed
Being over 70, I know what you are up against so, welcome to HO. If you will be downsizing as to the amount of railroad that will fit your available space, having a roster of accurate, quality rolling stock becomes doable.
By quality, I mean free-standing, not molded on ladders, grab irons, etc. Kadee semi-scale couplers, narrower, closer to scale draft gear boxes, no sliding doors with hideous, oversize claws. Hopefully we will one day have accurate code 88 wheeled trucks.
Quality, fully ready to run rolling stock may be had from:
Athearn Genesis
Kadee
Moloco
Rapido
Red Caboose
Scale Trains (Rivet Counter)
Tangent
Wheels of Time
These manufacturers produce some quality, accurate cars but they also produce some NKP (No Known Prototype) as well as purely fictitious roadnamed equipment:
Athearn Ready-to-Roll
Atlas
Broadway Limited
Intermountain
Walthers
Knowing your prototype will make it possible to purchase wisely and avoid the foobies and plain junk that is also out there. Again, welcome aboard.
kasskabooseYou can find RTR for under $20,
From ???? Auction sites? HOSwap? from the manufacturer? tell us more.
riogrande5761 RTR can range in price from about $20 to mid-fifties (Moloco) and higher for auto racks.
RTR can range in price from about $20 to mid-fifties (Moloco) and higher for auto racks.
You can find RTR for under $20, but it supply/demand certainly are factors.
Asside from Accurail, and the affore mentioned Tangent (undec kits), Intermountain also offers undec kits - see the top of the list at the link:
https://www.intermountain-railway.com/newshocomingsoon.html
Athearn and ExactRail has also offered undec its but limited and few and far between.
Note, Accurail is one of the few, if not the only manufacturer still producing decorated kits, BUT, you can find lots of OOP kits on Ebay or train shows, including MDC, Walthers, Intermountain, Proto 2000 and more.
Rio Grande. The Action Road - Focus 1977-1983
Except for resin, Accurail is probably the only "kit-only" manufacturer of rolling stock around anymore. Everyone else has gone RTR - minus a few outfits like Tangent that make a handful of undecorated kits.
With HO being pretty much ubiquitous, you should have no problem finding what you want to model. As mentioned already though, RTR comes with a price.
Tom
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
Be prepared to pay way too much (IMHO).
Mark P.
Website: http://www.thecbandqinwyoming.comVideos: https://www.youtube.com/user/mabrunton
Sorry if this is not helpful, Brian, but is there currently any RTR rolling stock that isn't a good runner straight from the box? Cheers, the Bear.
Sorry if this is not helpful, Brian, but is there currently any RTR rolling stock that isn't a good runner straight from the box?
Cheers, the Bear.
Bear,My Bachmann's "Silver Series" 50' boxcar is a good runner from the box.
My favorite list of RTR cars in no order of preference:
Athearn
ExactRail
Scale Trains
Fox Valley
Larry
Conductor.
Summerset Ry.
"Stay Alert, Don't get hurt Safety First!"
Hi Brian,
I go for quality not quantity so I buy Walthers (Mainline, Platinum, Proto), Bowser (fully assembled), Rapido, Atlas, Broadway Limited, InterMountain and Overland. I also have a rule that all road numbers have to be unique so I often look for multipacks.
Pretty much any manufacturer of Rolling stock is good these days but look for body mounted knuckle couplers, preferably kadee metal and metal wheels. This rules out Model Power in my experience at least for freight cars.
Joe Staten Island West
I have bought, kept and/or sold a lot of freight cars, and based upon my experience, I now avoid certain manufacturers.
Here is my list of good manufacturers.
Kato
Roundhouse
In my opinion, you cannot go wrong if you stick to this list.
Rich
Alton Junction
Triple BMy question is: what HO rolling Stock is ready-to-run, fully assembled right out of the box? I’m talking brand new also.
Pretty much any type of car you want. Pick up any model magazine, go on line to any of the manufacturers, and any of the zillion on line stores, you'll find more RTR cars than you could ever purchase, or have room for.
RTR is getting to be more the norm, and kits are getting harder to find.
Happy shopping!
"One difference between pessimists and optimists is that while pessimists are more often right, optimists have far more fun."
You'll have no trouble finding good quality assembled HO rolling stock. Mostly it's unbox and run it. Probably the most consistent quality, although a limited type of prototype models are offered, is by Kadee.
Mike Lehman
Urbana, IL
Hi,
I’m considering a move from N Scale to HO Scale due to the declining dexterity in my hands due to both peripheral neuropathy and rheumatoid arthritis. I’d be sacrificing a lot of layout space but have been extremely intrigued lately by the shelf/switching layouts ala Lance Mindheim anyway.
My question is: what HO rolling Stock is ready-to-run, fully assembled right out of the box? I’m talking brand new also. I’m not interested in assembling a bunch of box cars, hoppers, etc. for a new layout in a different scale. I’ve assembled dozens upon dozens of different models over the years so I’ve got my fill of that. I’ve moved to a phase in the hobby where operation and prototypical accuracy, to a certain extent, suits me just fine. If I have to assemble a bunch of rolling stock in HO, I might as well stay in N. I don’t mind the weathering and tweaking of HO fully assembled rolling stock.(BTW, I don’t mind assembling a few new HO building kits. Those parts almost seem oversized for an N scaler. )
Please post your opinion of who makes good, fully assembled HO rolling stock. Rank the different manufacturers if you wish. I would very much appreciate your input and PLEASE let’s NOT get into an argument on what does and does not constitute model railroading. I’m simply looking for help. Thank You!
Brian, N Scaler since 1983