LED MARS Light

[RR_Mel]

Great Dave, whatever turns your crank!

 

 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[hon30critter]

Personally I prefer the Gyralite/.040" spacer combination.

Dave

[RR_Mel]

This is with the .040” spacer and the decoder programmed to MARS.

 

http://s358.photobucket.com/user/melvinperry/media/E7%20MARS-040%20Spacing%202_zpsawb0pvw2.mp4.html

 

http://s358.photobucket.com/user/melvinperry/media/E7%20MARS-040%20Spacing_zpsy0oh0jny.mp4.html?sort=3&o=3

 

 

I think my preference is my original without any spacing.

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[RR_Mel]

I’m still experimenting with my two LED MARS/Gyralite configuration.  I guess that comes from my 50 years working in two-way radio communications, always trying to find a better way to do it.

 

I put a .040” clear plastic spacer between the two 2mm LEDs to attempt to widen the sweep.  This video is with the spacer and the decoder programmed to Gyralite.

 

http://s358.photobucket.com/user/melvinperry/media/E7%20Gyralite-040%20spacing_zpsgoikmffw.mp4.html

 

http://s358.photobucket.com/user/melvinperry/media/E7%20Gyralite-040%20spacing%202_zpsg33ze7w9.mp4.html 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[hon30critter]

Mel:

I think what you have done is really spectacular!

I have personally seen the mars/gyralight effect (I'm not quite sure which) from the cab of the CP Canadian way back in 1965. Don't ask how I was able to get a ride through Northern Ontario in the middle of the night, but I'll blame it on the other kid! Anyhow, seeing your video with the light projected onto a flat surface struck me as being pretty realistic.

Well done. Thanks for the 'How To'.

Dave

[RR_Mel]

Here is another attempt at a video clip.  This is with the decoder programmed for Gyralite.

 

http://s358.photobucket.com/user/melvinperry/media/E7%20Gyralite_zpsi8qji5wx.mp4.html 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[Mark R.]

Wasn't trying to be critical - just did a bit of research and passed it along. We all have different opinions on what looks right. If you like the color, that's all that matters.

Mark.

[RR_Mel]

I guess I can’t get anything right today.  I was at a show in junior high in 1949 and some outfit put on a demonstration of new things and one of them was an experimental super bright light, I was assuming now that it was Halogen.  Then when I was hanging out in the early 1950s at the SP yards in El Paso one of the SP mechanics was replacing the older dimmer lights in the headlights with newer and brighter lights, again now I was assuming they were Halogen.

 

 

My diesels have the newer bright lights but they are not halogen just bright white.

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[Mark R.]

RR_Mel

Tom

 

Here is a link for round top 2mm warm white Clear LEDs, you don’t want diffused.  I bought bright and warm 2mm LEDs.  I figure the railroads went to Halogen headlights in the mid to late 50s so I use bright white for my diesels  and warm white for my steam.

 

http://www.ebay.com/itm/100pcs-2mm-Water-Clear-Warm-White-Light-Round-Top-LED-Diodes-16000Mcd-/201501843117?hash=item2eea721ead:g:OAsAAOSw5dNWlMNT 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

 

Halogen lamps were invented in Europe in 1962 and weren't even legal in the US until 1983. Even then, the railroads continued to use sealed beam headlights. Aside from the ultra modern passenger engines, even the latest offerings today still use the standard sealed beam hadlights.

Your F unit, which would be new between the late 40's / early 50's, certainly wouldn't have them.

Mark.

[RR_Mel]

I was going to try to put one of my dual LEDs in my camera locomotive but the camera is so big there’s no room for the LEDs.  The MARS light would look slick on the walls in a tunnel.

 

 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[PHARMD98233]

Mel,

This is great!!  Just imagine the train as it is about to come out of a tunnel.  I have some conversions to do.

Thanks

[RR_Mel]

Tom

 

Here is a link for round top 2mm warm white Clear LEDs, you don’t want diffused.  I bought bright and warm 2mm LEDs.  I figure the railroads went to Halogen headlights in the mid to late 50s so I use bright white for my diesels  and warm white for my steam.

 

http://www.ebay.com/itm/100pcs-2mm-Water-Clear-Warm-White-Light-Round-Top-LED-Diodes-16000Mcd-/201501843117?hash=item2eea721ead:g:OAsAAOSw5dNWlMNT 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[tstage]

That's pretty slick, Mel.  I assume the 2mm LEDs are only available in straight white (vs. "yeloglo" or "golden-white")?

Tom

[RR_Mel]

OK!  Here is the best I can do at a video clip.  I don’t have any video editing programs so the clip is raw out of my camera.  I can’t get the video to load to this post so my Photo Bucket Link is below.

 

https://drive.google.com/file/d/1BpyxY12gIfkm04Y_jRph5xdahu4MJ7Mb/view?usp=sharing 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[RR_Mel]

I’m sorry but my photography skills aren’t very good, I’ve tried everything I can think of and all I get is an over exposed blob of light.  It really looks good to the naked eye.  My oldest daughter is a professional photographer so I’ll ask her how to shoot an oncoming headlight.  Unfortunately she lives in Denver so e-mail or phone advise will have to do.

 

 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[PHARMD98233]

Mel,

You have shown us a very clever setup and the video is intriguing.

Could you show us a video of what the effect looks like when looking at an approaching engine?  I think that would be the most convincing view.

Thanks!!

[RR_Mel]

Many years ago before DCC I built up a MARS alternating flasher circuit for my diesels using a LM555 timer, by using the two outputs of the timer for alternating flash I use the ramp drive portion to drive a third LED and it looked better than the Decoder MARS outputs.  One of the caps needed to be non polarized for the slow on off and a non polarized cap is huge and it was difficult to find enough room for it to fit.   It’s much easier to use the Decoder circuit.

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[Mark R.]

Thanks for the video !

To be honest, I'm really surprised they alternate like that. Not that I've ever had the need to have two functions both on Mars at the same time, I just assumed they would both flash together at the same rate. That's pretty slick that they alternate like that !

Thanks for bearing with me ....

Mark.

[RR_Mel]

I’m glad we got into it, I have been having sound programming problems and during my failure at photography my sound problems went away???  I had been changing the F1 & F2 settings around and something fixed my sound.  I had wanted to turn off the accessory sounds, Air/Break sounds, and I had left the CV settings at 1 and now I can barely hear them.  

 

Thanks Guys!!!!

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[RR_Mel]

Mark:

 

I’ve tried it with one Gyralite and one MARS and that works too.  It looks good using both on Gyralite but I happen to like it better in the MARS configuration.

 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[RR_Mel]

Ok I think I have a video, this is the best I could do.

 

 

 

I hope it works.  I don't see anything in preview.

If not here are a couple of links to my Google Drive.

 

https://drive.google.com/file/d/1BpyxY12gIfkm04Y_jRph5xdahu4MJ7Mb/view?usp=sharing

 

https://drive.google.com/file/d/1eNeaVDaz62aWw2OHf1pAWyKdJ8dEwFfJ/view?usp=sharing

 

 

 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[Mark R.]

Ok - now I got it. Geeze, talk about brain freeze .... must be the long week-end.

One last clarification .... one is set as a Mars light and the other is set as a Gyralight ? I can see how that would work well with the larger lens helping to blend the two. Will have to try this ....

Mark. 

[RR_Mel]

Mark:

 

You and I aren’t in sync.  I’m using function F1 (Green) for one LED and function F2 (Violet) for the other LED.  F1 call it the right LED ramps on as F2 left LED ramps off, then the process reverses.  They alternate, slow on slow off creating a sweeping effect from left to right.

 

I’m trying to make a video but photography is not my thing. 

 

 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[Mark R.]

Unfortunately then, your lack of experience is hampering your answer to my question. 

To be out of phase with each other, each of the LEDs would be attached to their own function output. To be "out of phase" means one would ramp up and flash bright, then the other would. As one is ramping up, the other is flashing it's bright pulse, then vice-versa.

I'm assuming then, based on your claim, this is not the case and both LEDs are connected to the same function output (?) and both pulse identical with each other.

Mark.

[RR_Mel]

Mark:

 

I don’t have experience with decoders other than MRC and Digitrax and both of those manufacturers MARS and Gyralite functions are as you describe it “opposite phased to each other” or as I refer to them as alternating.

 

Charles:

 

I tried making a video but I lack a lot in that department, I made several tries but the LEDs wash out and just look like a blob of light.

 

 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[Trainman440]

Sounds like it works!

I'll try it next time.

could you make a video of it working and show it to me/us?

[Mark R.]

I understand the functionality of each function / feature, I'm just having trouble wrapping my head around how you got each LED to flash out of phase with the other. Or, do they both actually flash the same together ? That would work well IF they are opposite phased to each other, but I'm not aware how you would do that. (?)

Mark. 

[RR_Mel]

Mark R.

Do the two LEDs flash out of phase with each other ?

Mark.

 

Yes, The MARS and Gyralite DCC decoder function is an alternating output giving the LEDs a sweeping action.

 

 

 

 

Mel

 

Modeling the early to mid 1950s SP in HO scale since 1951

 

My Model Railroad   

http://melvineperry.blogspot.com/

 

Bakersfield, California

 

I'm beginning to realize that aging is not for wimps.

[Mark R.]

Do the two LEDs flash out of phase with each other ?

Mark.