junior wrote:CAN YOU HELP ME?
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
Super Chief Rules wrote: And how did cs end up on the second page? I know I am new to it so ifigured I would fix it!
Thanks for fixing that little "problem".
And Jeff, I could've gone without the turkey pic.
Life's hard, even harder if your stupid John Wayne
http://rtssite.shutterfly.com/
Prefect timing Jeff, we ate at 1:00 and its just starting to wear off and now I see you are buying!
I'm thinking some big ol' shrimp lets say a dozen, pecan pie with real whipped cream ( none of this coolwhip crap) and how a nice batch of those deep fried catfish cheeks. I'll wash it down with a very large Southern Comfort & Squirt, with lots of ice. Double time i'm ready to eat.
jeffrey-wimberly wrote: Hello all, I'm home! Ok David, give up the computer so I can log on. Been cutting up more plywood today. I cut over 1,500 pieces, mostly box bottoms, tops and ends. I had one moment there when I thought I might get hurt badly. I was cutting a piece of 3/4" CDX measuring 4' x 3 1/5' when it slipped and got gaught on top of the saw blade. the saw threw it back at me. It hit me right above the belt buckle with enough force that it knocked the wind out of me and pushed me back about a foot. I'm glad it hit me on a broad edge and not with a corner. As it is, I have a somewhat nasty bruise there now, and I don't bruise easily.
Hello all, I'm home! Ok David, give up the computer so I can log on.
Been cutting up more plywood today. I cut over 1,500 pieces, mostly box bottoms, tops and ends. I had one moment there when I thought I might get hurt badly. I was cutting a piece of 3/4" CDX measuring 4' x 3 1/5' when it slipped and got gaught on top of the saw blade. the saw threw it back at me. It hit me right above the belt buckle with enough force that it knocked the wind out of me and pushed me back about a foot. I'm glad it hit me on a broad edge and not with a corner. As it is, I have a somewhat nasty bruise there now, and I don't bruise easily.
Jeff just be glad that it didn't hit BELOW your belt....
ModelTrainLover wrote: jeffrey-wimberly wrote: Hello all, I'm home! Ok David, give up the computer so I can log on. Been cutting up more plywood today. I cut over 1,500 pieces, mostly box bottoms, tops and ends. I had one moment there when I thought I might get hurt badly. I was cutting a piece of 3/4" CDX measuring 4' x 3 1/5' when it slipped and got gaught on top of the saw blade. the saw threw it back at me. It hit me right above the belt buckle with enough force that it knocked the wind out of me and pushed me back about a foot. I'm glad it hit me on a broad edge and not with a corner. As it is, I have a somewhat nasty bruise there now, and I don't bruise easily. Jeff just be glad that it didn't hit BELOW your belt....
BM1 Lee Soule USCG (ret) L.S.&W Railroad Serving the Lower Great Lakes
LSWrr wrote:Jeff I think you are over due for a vacation
I AGREE!
-Dan
Builder of Bowser steam! Railimages Site
Evening Gang:
Ah. Jeff: Take it easy there. It's begining to look like you may be a little accident prone. How about we take turns and watch out for you?
A very nice day here. The weather couldn't have been better. Try 75f, light breeze out of the south, clear blue skys and a great turkey supper. I spent the day moving a manure pile that had been sitting for several years so we could have a little more manuvering room at the barn. Tractors with loaders are great. I also took some time to do some reading. I picked up a book titled "At All Costs". It was about the attempte to resupply Malta during WW2. It manly told of the SS Ohio, the tanker that made a heroic effort to make it to Malta. It arrived with decks awash and under tow but with it's badly needed cargo of fuel oils. If you haven't heard about this event look it up.
Well I think that I'll head for bed.
Good Night All
Bill Tidler Jr.
Near a cornfield in Indiana...
A little on the nippy side down here in Louisiana.
Leesville, LA 71446 11/24/2006 Wind Chill: 44°FHumidity: 91%Dew Point: 42°FSo Far TodayHigh: 48°FLow: 44°FRain: N/A"Rain Rate: N/A"/hGust: 0mph NNE High: 75 °FLow: 45 °FDense fog advisory in effect until 8 AM cst this morning.Today High: 75 Mostly sunny. Areas of dense fog in the morning. Highs in the mid 70s. Light and variable winds. Tonight Low: 45 Mostly clear. Patchy fog after midnight. Lows in the mid 40s. Light and variable winds.
Today, I'll have the ham and eggs.
Here's the national current temparatures.
Mornin , an irish coffee please Zoe,
Hope ya'll had a good thanksgiving, ours was ok, play with the grandkids, watched some football, and eat to much.
I decided having ours at Kris's wasn't such a good idea. Mother thought she needed to take half the kitchen up there. I think it's easier to do it here, even with the cleaning.
Jeff,,, you've had run of hard luck with health issues lattely. Best slow down for a bit I thin.
Lee,,, to post photos,,, first ya need a photo account, this one seems to be the easiest for me,,
http://photobucket.com/ , once you get that done and some photos in it. Click the little box below the pic, go to the bottom of the page, click generate HTLM am IMG code and another page will come up. I use IMG images for message boards for post here. Then highlite,copy/paste in the forum.
If'en ya has problems, just give a holler some body here will help ya. Lookin foward to some pics from up your way.
HEY RT,,, I sent you another email yesterday, did ya gets it this time.
Best get on some chores, got plenty to do today. Ya'll has a gooden
inch
http://www.trainboard.com/railimages/showgallery.php/cat/500/ppuser/4309
jeffrey-wimberly wrote: Here's the national current temparatures.
It's cold up here but it's quiet nice for this time of year
Jeff, are you trying to trump everyone? THE WHOLE UNITED STATES! LOL
OK, here's for JUST the Indianapolis, Indiana area. The current weather, live and updated every minute, is:
And the 5 day forcast looks like this:
So whats going on everyone? Has everyone recovered from yesterday yet?
Lee, inch outlined photo posting pretty well. If you don't want to go that route you can just Email them to me and I'll post them on Monday when I can get to the Email account thats in my profile.
Inch will be sending package out monday . Got email yesterday
Well, as many of you know, I had to tear down the last layout so we could move. Now we're in the new place and the boxes are mostly unpacked..
This morning the train room looked like this:
http://i83.photobucket.com/albums/j319/pcarrell/Autumns%20Ridge/Picture005.jpg
http://i83.photobucket.com/albums/j319/pcarrell/Autumns%20Ridge/Picture031.jpg
http://i83.photobucket.com/albums/j319/pcarrell/Autumns%20Ridge/Picture033.jpg
Lots of fun if you're into guitars, but not much for trains.
I just took the last two hours and changed all that though.
I just built the first of a whole lot of benchwork. I've got a long way to go, but I'm off now to get more wood for some cross braces and such. Here it is now:
http://i83.photobucket.com/albums/j319/pcarrell/Autumns%20Ridge/Picture006.jpg