Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Lionel up verandah

3672 views
43 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2002
  • 7,486 posts
Posted by ndbprr on Friday, April 16, 2004 7:53 AM
Wait for the MR review. It will say great new loco and praise anything they can find positive with no mention of anything negative and you should buy five or six of them.
  • Member since
    November 2003
  • From: the Netherlands
  • 1,883 posts
Posted by lupo on Friday, April 16, 2004 4:21 AM
thanks ! [tup]
but please keep in touch, those who have 'ïnside" information on any problems! or where to give special attention to when first firing up the engine!
I hope my veranda comes over in good shape and working order, because sending back and forth faulty locomotives from europe to the us is expensive and time consuming, and I allready spend a big part of my 2004 budget by ordering it.
L [censored] O
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, April 16, 2004 3:30 AM
A big T H A N K S !

I suspect without this supplemetal addendum no one could succesfully fire this baby up.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, April 15, 2004 9:01 PM
Here's the Veranda Quick Start:
http://img16.photobucket.com/albums/v47/Hobby/Veranda_QS.jpg
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, April 15, 2004 7:16 PM
Hi cw

Can you post the Quick Start Guide Instructions that came with it?

There' are possibilities that they never made it into every box.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, April 15, 2004 5:54 PM
Mine seems fine other than having a broken rear coupler on the engine. A Kadee #5 replaced it perfectly. Sounds are good and the power up sequence from diesel to turbine is controlled by the #7 button on your DCC controller. As mentioned above, speed is limited to 25 smph while in diesel mode. I think it's a good locomotive. Slow speed is great but there is a rather abrupt speed jump when advancing the throttle. I haven't tried resetting any CV's except the ID# yet, so maybe that can be eliminated. The problem may be due to my Zepher not being on Lionel's list of recommended DCC controllers.
  • Member since
    July 2002
  • From: California
  • 3,722 posts
Posted by AggroJones on Thursday, April 15, 2004 5:20 PM
Holy crap! Really? It doesn't matter terribly to me, cause I have no plans attempting to get one. But I still would like to have seen one in person.

"Being misunderstood is the fate of all true geniuses"

EXPERIMENTATION TO BRING INNOVATION

http://community.webshots.com/album/288541251nntnEK?start=588

  • Member since
    December 2003
  • From: Good ol' USA
  • 9,642 posts
Posted by AntonioFP45 on Thursday, April 15, 2004 4:28 PM
PhillipKeeley,

Can you ask Tony's as to what exactly was wrong with the Verandas they had?

"I like my Pullman Standards & Budds in Stainless Steel flavors, thank you!"

 


  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, April 15, 2004 4:17 PM
There's always the possibility that the Quick Start Quide may not have
been in the box.
There's a written procedure to follow to fire this baby up.
Wonder if it was included in Tony's order??????????
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, April 15, 2004 4:00 PM
I don't know the specifics of the problem yet but when I do I will let you know, I ordered it from Tony's train exchange and they ran me saying that the first one they got for me don't work properly and they sent it back to the distributor, they got a second one and apparently it still didn't work so they said they would cancel my order for the verandah, I mean it look a beautiful loco but if it doesn't work what's the point!
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, April 15, 2004 2:27 PM
I couldn't wait.

According to Lionel Tech Support they are not aware of any problems.

What may be the issue is"out of the box in Diesel mode, DCC mode, the
diesel mode is set for 25MPH'.

For Diesel or Turbo operation one must refer to the quick start guide that
should have been enclosed.

586-949-4100, ext 1360, Deb.

You can also e-mail them at
techsupport@lionel.com
I have requested a hard copy print out of the Quick Start Quide for posting.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, April 15, 2004 2:03 PM
Go right to the top. 586-949-4100. We don'.t need another kato AC4400 rumor.

CORRECTED to AC from CW. Thanks BB.
  • Member since
    December 2003
  • From: Good ol' USA
  • 9,642 posts
Posted by AntonioFP45 on Thursday, April 15, 2004 1:55 PM
PhillipKeeley,

It is surprising news. [:0][B)]

Have you e-mailed Lionel and asked them what are the specific problems? Try it; and share their response with us. [:p][;)]

It stands to reason that Lionel is making efforts to correct reported problems. [4:-)]Manufacturers know that bad news about new products tends to travel fast! [B)]

"I like my Pullman Standards & Budds in Stainless Steel flavors, thank you!"

 


  • Member since
    November 2003
  • From: the Netherlands
  • 1,883 posts
Posted by lupo on Thursday, April 15, 2004 1:40 PM
I hope you are wrong because mine should be in the mail to europe since last monday, and I have still another few weeks ( 2 - 6 ) to wait before it arrives,
and I can check it out.
Do you have any info on what the problem is / was?

[censored] I thought Lionel stood for good old American Craftsmanship. . . .

[xx(] at least it has the somewhat right color for a $400,= lemon [xx(]

L [censored] O
  • Member since
    April 2003
  • 305,205 posts
Lionel up verandah
Posted by Anonymous on Thursday, April 15, 2004 1:22 PM
Hey model railroaders, my model railroad supplier has been in contact with me regarding the new Lionel up verandah, he says that it doesn't work properly and that my order for that is cancelled.
He tells me that several other dealers are also having problems with this loco, it's ok to cancel my order, I wouldn't want to be sent something that doesn't work, so has anybody out there had any feedback about this as well.
I also believe that there are some problems with the Lionel challenger, Lionel crew stop rushing to get these things out into the market before they are fully operational, nobody likes inferior products and what makes it worse is that these items are expensive compared to the likes of Kato and Athearn!!

Come on Lionel get your act together!!

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!