Thanks igoberg
I bought the micro-trains 1135 series, I think that will work
Thanks again
Trainsme:
Here is the conversion information from microtrains web site:
Hi,
I have been in N scale since the early 80's and anything about N scale draws my interest.
I love diesels and look forward to Kato releasing SD70Ace engines.
Hey igoldberg,
That'looks great!!! I have bought two old life-like GP-38's that have the old, What I call "the hook couplers" does anybody know what series number of micro-train couplers I should use???
Thanks- Happyrails
Trainsrme
From the far, far reaches of the wild, wild west I am: rtpoteet
Thanks for the compliment. Yes, the long hood is from an Atlas GP9 cut just behind the cab. It is a perfect fit on the RS2 drive.
igoldberg wrote: Here is the picture of my RS2r. An RS2 that has been repowered with and EMD prime mover. The inspiration for this is a picture of the Frisoc #553 in the Diesel Spotters Guide. Railpictures archives has pictures of #551 & 553.. http://i521.photobucket.com/albums/w333/gsrrman/RS2r.jpg
Here is the picture of my RS2r. An RS2 that has been repowered with and EMD prime mover. The inspiration for this is a picture of the Frisoc #553 in the Diesel Spotters Guide. Railpictures archives has pictures of #551 & 553.
. http://i521.photobucket.com/albums/w333/gsrrman/RS2r.jpg
Is that long hood off a GP9? Looks good.
Sawyer Berry
Clemson University c/o 2018
Building a protolanced industrial park layout
I can't link it and I'm too lazy to type it in but thanks anyway.
Hi all,
I'm trying to model a abandon tunnel that has collasped, I'm using real rock and dirt, I hope it comes out well. If any of you all have done this can you post a pic of yours??? I already have in place the tunnel portal, I need to add some insulation foam around and behind the portal, I have some old track in place, I took out pieces of rail and left the ties, I'm going to use browns, burnt sienna,greens,tans colors to similate the ground around the tunnel, As soon as I finish this prodject I will post pic's. On our layout it's a Union Pacific-BNSF shared branchline that run's to the Oregon Coast towns of Coos Bay, Tonka City and Brookings,
R.T. Poteet:
I will post a picture as soon as I can.
igoldberg wrote:R. T. Poteet, are you asking about my repower RS2? If so I will get a picture up next week. Need to get a friend of mine to use his digital camera to get a picture that I can post.
I remember one time seeing these repowered units referred to as Ugly Ducklings because they became just that during the transformation; I have seen them done in HO-Scale but never in N-Scale and I am interested in what your finished model of one of these Ugly Ducklings looks like!
TrainsRMe1 wrote: Okay Nscalers, I hope this goes well, This is the first post of the Nscale supper club, feel free to come in and look around, meet new friends and see some old one's too! We're open 24/7 Ask questions about Nscale Modelrailroading, also post some pic's of your layouts. So let's get this goin'
Okay Nscalers,
I hope this goes well, This is the first post of the Nscale supper club, feel free to come in and look around, meet new friends and see some old one's too! We're open 24/7 Ask questions about Nscale Modelrailroading, also post some pic's of your layouts. So let's get this goin'
Sorry there TrainsRMe1@aol.com but it really doesn't look like this dedicated post is going to get good traction; the original The 'N' Crowd got off to a rousing "bang" but eventually slowed down and I remember one time I had to go all the way back to page #37 to resurrect it! You are to be commended for trying to give some unique dedication to N-Scale but this forum differs from others because it assumes a more general tone than N-Scale dedicated forums.
With that in mind I would like to call the readership's attention to two features in the September 2008 issue of Model Railroader magazine. The first of these features is David Popp's article about expanding his highly photogenic Naugatuck Valley Railroad. I found his means of extending his benchwork highly inspirational; of equal note is his utilization of sheet cork as a surface agent. As I read this one word kept screaming at me: yard. I long past lost track of the number of querries on this forum pertaining to ballasting yard trackage. By laying down sheet cork and cutting/scooping out a trench for flex track the tie-tops can be brought down to near cork-top level and ballast applied giving that flat appearance so characteristic of yards. Thanks David Popp; I've struggled with achieving that for many years. You may just have supplied the forum readership with the means of doing it effectively.
Of second note is Tony Koester's Trains of Thought column this month dealing with the subject of freelancing. I am not a particularly strong fan of Tony Koester but I will admit that he does hit a nerve every now and then and he did it with this months feature. Being a freelancer can, in many ways, be more difficult than being a hard-prototype modeler; Tony did not infer as some have that freelancers are basically lazy; what he did say is that freelancers can take liberties with prototype practices denied to those of the hard-prototype persuasion. If you are going to model Smithville, Illinois fidelity requires you to place all your local industries on one side of the track and place them in a particular order; as a freelancer I can adopt the flavor of Smithville while putting all the industries on the wrong side of the tracks and rearranging them into a completely different pattern of sequence.
Two things have always struck me: I don't see it so much here as on other N-Scale dedicated forums but firstly is gripes asking "when is such-and-such going to bring out their GP-something-or-other in the paint scheme of the XYZ railroad with their traditional high - or low - positioned headlights?" or something in that vein. As an N-Scaler freelancer I tend to buy my motive power decorated in the livery of the famous Undec Railroad and I can always rationalize things like headlight placement and the like. I have a set of standards for my locomotives and, although certain scratchbuilding parts are a little spare in N-Scale, I am usually able to find something to allow conformity with those standards.
Anyway, if you don't get MR its worth taking a gander at these two articles.
Good Morning All,
Wow, after working graveyard on our mrxr I thought I would come to the supper club and get some breakfast, Only too see just a few of the supper clubbers here, Anyway, I just laid the turnouts for our new classifaction yard, that will be shared by Union Pacific and BNSF( no fighting kids play nice). All of the tunouts are manual incase I just want to do some switching, or set up trains for the next run. I will post pic's soon, take care and have a great morning, I will be in later today sometime to see howya doin'
Trainsrme1 , Union Pacific Oregon Coast subdivision
Hey stevechurch2222,
Is that the high nose model???? can you post a pic?
Packers#1, how ya doin' Mrs trainsrme1, or (the better half, the co-owner of the Nscale Supper Club) works for Tri-met,that's our transit company here. She operates the Portland Street Car downtown, and I drive the buses Does anybody know where I can find a moderen era signal bridge?? Take care nscalers I'll be back soon
Personally, I prefer to post topics to threads that address particular issues relating to N scale. I don't find much of use in these more social potpourri threads. Sorry. If you really want to discuss issues surrounding N scale model railroading, there quite a few forums that do it much better than this one.
May I suggest you visit Scale Rails Online, or The Railwire.
Lee
Route of the Alpha Jets www.wmrywesternlines.net
mrstrainsrme1:
What RR do you work for?
Hi Supper Club,
I am married to a model railroader! I operate a train in real life and I always tell folks that my husband only married me for that reason!But he doesn't realize I married him because of him being a wonderful and creative n-scaler I enjoy reading the discussions. Talk to you soon!
Mrstrainsrme1
I know how you feel about finding some things in Nscale, I have been looking for a moderen era signal bridge for the longest time I'm sure as time goes by they will have more stuff in Nscale!!!! Thanks for the great start to the "Nscale Supper Club" I'm just trying to add to the wonderful world of Nscalers by having this forum, this is BY NO MEANS in compition with "The NCrowd 2" feel free to visit there as well as "The Nscale Supper Club, food and drinks are half price after 10:00 PDT I figure that what you can't find there, you'll find here!!! Take care and have a good night.